Premium Information is available for this item - Upgrade for $1 a day
5306-01-266-9207
Shear Bolt
5306012669207 012669207 BACB30ST7-31
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS. View more Shear Bolt
November 2023
4
Marketplace 5306-01-266-9207
Request a Quotation from participating marketplace vendors
Restrictions 5306-01-266-9207
5306-01-266-9207 is a Shear Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-266-9207
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-266-9207
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Supplementary Collaborators:
- GTKE
Approved Sources 5306-01-266-9207
- Part Number
- Manufacturer
- Status
- BACB30ST7-31
- Manufacturer
- 16258 - Space-Lok, Inc. (Active)
- Primary Buy
- Primary Buy
- BACB30ST7-31
- 56878 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- BACB30ST7-31
- 80539 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- BACB30ST7-31
- 84256 - Avibank Mfg., Inc. (Active)
- Primary Buy
- Primary Buy
- BACB30ST7-31
- 29372 - Howmet Global Fastening Systems Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BACB30ST7-31
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BACB30ST7-31
- 81205 - The Boeing Company (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5306-01-266-9207
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 2.258 Inches Minimum First Hole And 2.316 Inches Maximum First Hole
- Fastener Length [AASB]
- 2.801 Inches Minimum And 2.831 Inches Maximum
- Grip Diameter [AAUR]
- 0.4363 Inches Minimum And 0.4370 Inches Maximum
- Grip Length [ANEE]
- 1.923 Inches Minimum And 1.953 Inches Maximum
- Hardness Rating [CQFM]
- 36.0 Rockwell C Minimum Fastener And 40.0 Rockwell C Maximum Fastener
- Head Height [AASU]
- 0.219 Inches Minimum And 0.234 Inches Maximum
- Head Style [AASK]
- Dished Hexagon
- Material [MATT]
- Steel Comp E4340 Fastener Or Steel Comp 4140 Fastener Or Steel Comp 8740 Fastener Or Steel Comp 8735 Fastener Or Steel Comp 6150 Fastener
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.438 Inches
- Shank Unthreaded Hole Diameter [AAWB]
- 0.106 Inches Minimum First Hole And 0.116 Inches Maximum First Hole
- Special Features [FEAT]
- Assembly Area Extended At Threaded End; 0.402 In. Min And 0.412 In. Max Length 0.369 In. Min And 0.372 In Max Dia; Assembly Contains Retainer Pawl,Matt Cres Per Ams 5643,Rockwell Hardness 35.0 Min And 39.0 Max; Finish Blast Per Bac 5951,Passivate Per Qq-P-35,Dry Film Lube Per Mil-L-8937; Spring Matt Cres Per Ams 5673,Rockwell Hardness 48.0 Min,Finish Passivate Per Qq-P-35; Pin And Plug Matt 303 Cres Per Astm A582,Finish Passivate Per Qq-P-35
- Thread Series Designator [THSD]
- Unjf
- Width Between Flats [AATB]
- 0.679 Inches Minimum And 0.690 Inches Maximum
- Surface Finish [CSYM]
- 32.0 Microinches Grip
- Surface Finish [CSYM]
- 32.0 Microinches Threads
- Surface Finish [CSYM]
- 63.0 Microinches Bearing Surface Of Head
- Surface Treatment [SFTT]
- Cadmium Fastener And Chromate Fastener
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.466 Inches Minimum And 0.476 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 20
DLA Procurement Analysis 5306-01-266-9207
- Last Stock Position:
- 324 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-266-9207
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5306-01-266-9207
Freight Information 5306-01-266-9207
5306-01-266-9207 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-266-9207 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-266-9207 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-266-9207 is not classified as a special type of cargo when transported by water. 5306-01-266-9207 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-266-9207
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-01-266-9207 1 Records
Contracting Technical Data File (CTDF) 5306-01-266-9207 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: