Premium Information is available for this item - Upgrade for $1 a day
5306-01-256-0410
Shear Bolt
5306012560410 012560410 NAS6205-90DH NAS1105-90D
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS. View more Shear Bolt
November 2023
12
Marketplace 5306-01-256-0410
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-256-0410 4+ Documents (More...)
NAS1105-90D BOLT,SHEAR 27 EA NS Request Quotation Subscribe to View Vendor Details...
NAS1105-90D BOLT 4 EA NS Request Quotation FedMall Updated Every 15 Minutes 5306-00-157-5567 BUY NE FedMall
Shear Bolt 5306012560410 012560410 (Identification) 1/2 NSN 5306-01-256-0410 (Identification) 2
United States (US) 4. 5306-01-256-0410 Marketplace Restrictions Approved Sources Datasheet Management
Shear Bolt 5306012560410 012560410 5306-01-256-0410 5306012560410 012560410 is a high strength,
Restrictions 5306-01-256-0410
5306-01-256-0410 is a Shear Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-256-0410
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-256-0410
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Philippines (ZM01)
- Effective Date:
- 1 Feb 2015
Approved Sources 5306-01-256-0410
- Part Number
- Manufacturer
- Status
- NAS6205-90DH
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- NAS1105-90D
- 80205 - National Aerospace Standards (Active)
- Transferred
- Transferred
Datasheet 5306-01-256-0410
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 5.856 Inches Minimum All Holes And 5.906 Inches Maximum All Holes
- Fastener Length [AASB]
- 6.048 Inches Minimum And 6.078 Inches Maximum
- Grip Diameter [AAUR]
- 0.3110 Inches Minimum And 0.3120 Inches Maximum
- Grip Length [ANEE]
- 5.615 Inches Minimum And 5.635 Inches Maximum
- Hardness Rating [CQFM]
- 36.0 Rockwell C Minimum Overall And 40.0 Rockwell C Maximum Overall
- Head Height [AASU]
- 0.156 Inches Minimum And 0.171 Inches Maximum
- Head Style [AASK]
- Dished Hexagon
- Hole Configuration Style [CRHC]
- Hexagon Flats
- Hole Diameter [AAUB]
- 0.070 Inches Minimum And 0.080 Inches Maximum
- Hole Quantity [ASXK]
- 3
- Hole Type [BQDM]
- Drilled
- Material Document And Classification [MDCL]
- Mil-S-5000 Mil Spec 1St Material Response Overall Or Mil-S-6049 Mil Spec 2Nd Material Response Overall Or Ams 6322 Assn Std 3Rd Material Response Overall
- Material [MATT]
- Steel Comp E4340 Overall Or Steel Comp 8740 Overall
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Shank Unthreaded Hole Diameter [AAWB]
- 0.076 Inches Minimum All Holes And 0.086 Inches Maximum All Holes
- Thread Series Designator [THSD]
- Unf
- Width Between Flats [AATB]
- 0.492 Inches Minimum And 0.502 Inches Maximum
- Specification/Standard Data [ZZZK]
- 80205-Nas6205 Professional/Industrial Association Standard
- Surface Finish [CSYM]
- 32.0 Microinches Bearing Surface Of Head
- Surface Finish [CSYM]
- 32.0 Microinches Grip
- Surface Finish [CSYM]
- 32.0 Microinches Threads
- Surface Treatment Document And Classification [STDC]
- Qq-P-416 Ty 2 Cl 2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.413 Inches Minimum And 0.463 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 24
Weapon Systems (WSDC) 5306-01-256-0410
DLA Procurement Analysis 5306-01-256-0410
- Last Stock Position:
- 14 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-256-0410
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5306-01-256-0410
Freight Information 5306-01-256-0410
5306-01-256-0410 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-256-0410 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-256-0410 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 574 for ocean manifesting and military sealift. 5306-01-256-0410 is not classified as a special type of cargo when transported by water. 5306-01-256-0410 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-256-0410
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Any bag or sack used by the vendor
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-01-256-0410 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A622V186S
- 01 Apr 2022
- Subscribe
- 14
- Subscribe
- Subscribe
- Subscribe
- SPE4A622V9263
- 18 Jan 2022
- Subscribe
- 9
- Subscribe
- Subscribe
- Subscribe
- SPE5E318V7275
- 19 Jul 2018
- Subscribe
- 23
- Subscribe
- Subscribe
- Subscribe
- SPE5E415V6019
- 04 May 2015
- Subscribe
- 56
- Subscribe
- Subscribe
- Subscribe
- SPM5E413MQF35
- 28 Feb 2013
- Subscribe
- 86
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5306-01-256-0410 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: