Premium Information is available for this item - Upgrade for $1 a day
5306-01-254-4366
Close Tolerance Bolt
5306012544366 012544366 ST3M453-8D21 S353-8D21 PBF1253-8D21 109453-8D21 VAL23029-8D21 AIC753-8D21 S11-1060-8D21 MB61-8D21 GS1016-8D21 11825-8D21 MA5453-8D21 BM17019-8D21 KS3020-8D21 VS3204-8D21
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
November 2023
14
Marketplace 5306-01-254-4366
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-254-4366 1+ Documents (More...)
-8D21 11825-8D21 MA5453-8D21 BM17019-8D21 KS3020-8D21 VS3204-8D21 An externally threaded fastener whose
ST3M453-8D21 BOLT,CLOSE TOLERANCE RQST NS Request Quotation Subscribe to View Vendor Details... 5306-
Restrictions 5306-01-254-4366
5306-01-254-4366 is a Close Tolerance Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-254-4366
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-254-4366
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- Singapore (YJ01)
- Effective Date:
- 1 Jun 2014
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 2008
Approved Sources 5306-01-254-4366
- Part Number
- Manufacturer
- Status
- ST3M453-8D21
- Manufacturer
- 76301 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- ST3M453-8D21
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- S353-8D21
- 17446 - Huck International, Inc (Active)
- Secondary Buy
- Secondary Buy
- PBF1253-8D21
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- 109453-8D21
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- VAL23029-8D21
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- AIC753-8D21
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- S11-1060-8D21
- 57928 - Sonic Industries, Inc. (Active)
- Secondary Buy
- Secondary Buy
- MB61-8D21
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- MB61-8D21
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- VS3204-8D21
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- ST3M453-8D21
- 0UCY9 - M.S. Aerospace Inc. (Active)
- Secondary Buy
- Secondary Buy
- BM17019-8D21
- 17446 - Huck International, Inc (Active)
- Secondary Buy
- Secondary Buy
- GS1016-8D21
- 1EM77 - B & B Specialties Inc (Active)
- Secondary Buy
- Secondary Buy
- 11825-8D21
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- ST3M453-8D21
- 58845 - Abounding Security Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MA5453-8D21
- 58845 - Abounding Security Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BM17019-8D21
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- S353-8D21
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- KS3020-8D21
- 59764 - Kenaloy Products Inc Sub Masco Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- VS3204-8D21
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ST3M453-8D21
- 59764 - Kenaloy Products Inc Sub Masco Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-01-254-4366
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 1.817 Inches Minimum First Hole And 1.874 Inches Maximum First Hole
- Fastener Length [AASB]
- 1.945 Inches Minimum And 1.992 Inches Maximum
- Grip Diameter [AAUR]
- 0.4990 Inches Minimum And 0.4995 Inches Maximum
- Grip Length [ANEE]
- 1.302 Inches Minimum And 1.322 Inches Maximum
- Head Height [AASU]
- 0.271 Inches Minimum And 0.291 Inches Maximum
- Head Style [AASK]
- Double Hexagon
- Material [MATT]
- Steel Comp Xm-13 Overall
- Minimum Tensile Strength [CQBC]
- 125000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.500 Inches
- Material Document And Classification [MDCL]
- Ams5629 Assn Std Single Material Response Overall
- Shank Unthreaded Hole Diameter [AAWB]
- 0.106 Inches Minimum First Hole And 0.111 Inches Maximum First Hole
- Thread Series Designator [THSD]
- Unjf
- Width Between Flats [AATB]
- 0.752 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.623 Inches Minimum And 0.690 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 20
Weapon Systems (WSDC) 5306-01-254-4366
DLA Procurement Analysis 5306-01-254-4366
- Last Stock Position:
- 57 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-254-4366
Similar Supply Items to 5306-01-254-4366
Freight Information 5306-01-254-4366
5306-01-254-4366 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-254-4366 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-254-4366 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-254-4366 is not classified as a special type of cargo when transported by water. 5306-01-254-4366 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-254-4366
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-01-254-4366 2 Records
Contracting Technical Data File (CTDF) 5306-01-254-4366 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: