Premium Information is available for this item - Upgrade for $1 a day
5306-01-211-4352
Close Tolerance Bolt
5306012114352 012114352 BACB30LT6D19 BACV30LT6D19 BACB39LT6D19 BACB390LT6D19
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
November 2023
9
Marketplace 5306-01-211-4352
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-211-4352 1+ Documents (More...)
BACB30LT6D19 BOLT,CLOSE TOLERANCE 6 EA NS Request Quotation Updated Every Day 5306-01-211-4352 RQST NE
Updated Every Day 5306-01-211-4352 RQST Updated Every Day 5306-01-211-4352 RQST NE Related Documents
Restrictions 5306-01-211-4352
5306-01-211-4352 is a Close Tolerance Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-211-4352
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-211-4352
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- Singapore (YJ01)
- Effective Date:
- 1 Sep 2006
Approved Sources 5306-01-211-4352
- Part Number
- Manufacturer
- Status
- BACB30LT6D19
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- BACB30LT6D19
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- BACB30LT6D19
- 93907 - Textron Fastening Systems (Active)
- Secondary Buy
- Secondary Buy
- BACV30LT6D19
- 17446 - Huck International, Inc (Active)
- Secondary Buy
- Secondary Buy
- BACV30LT6D19
- 1RC86 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- BACB30LT6D19
- 17943 - Federal Manufacturing Corp (Active)
- Secondary Buy
- Secondary Buy
- BACB30LT6D19
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- BACV30LT6D19
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- BACV30LT6D19
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- BACB30LT6D19
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- BACB30LT6D19
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BACB39LT6D19
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- BACB390LT6D19
- 06710 - Valley-Todeco, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BACB30LT6D19
- 80539 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BACV30LT6D19
- 06952 - Insulation Supply Co. (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-01-211-4352
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 1.466 Inches Minimum And 1.528 Inches Maximum First Hole
- Fastener Length [AASB]
- 1.643 Inches Minimum And 1.673 Inches Maximum
- Grip Diameter [AAUR]
- 0.3735 Inches Minimum And 0.3745 Inches Maximum
- Grip Length [ANEE]
- 1.178 Inches Minimum And 1.198 Inches Maximum
- Head Height [AASU]
- 0.200 Inches Minimum And 0.220 Inches Maximum
- Head Style [AASK]
- Double Hexagon
- Material [MATT]
- Iron Alloy 660 Overall
- Nominal Thread Diameter [AHYM]
- 0.375 Inches
- Material Document And Classification [MDCL]
- Ams5737 Assn Std Single Material Response Overall
- Shank Unthreaded Hole Diameter [AAWB]
- 0.106 Inches Minimum And 0.116 Inches Maximum First Hole
- Special Features [FEAT]
- Green Dye Or Paint On The Thread End
- Width Between Flats [AATB]
- 0.553 Inches Minimum And 0.564 Inches Maximum
- Surface Finish [CSYM]
- 32.0 Microinches Bearing Surface Of Head
- Surface Finish [CSYM]
- 32.0 Microinches Threads
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 2 Class 2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium And Chromate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.445 Inches Minimum And 0.495 Inches Maximum
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 24
Weapon Systems (WSDC) 5306-01-211-4352
DLA Procurement Analysis 5306-01-211-4352
- Last Stock Position:
- 2681 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-211-4352
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- E
- The current standard price is an estimated price.
Estimated Price challenges are allowed but follow procedures in para 60.b. (3) of section L of this manual.
This code will be changed to a P code upon notification of a contract price or this code will be changed to an updated code upon determination of a valid price.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5306-01-211-4352
Freight Information 5306-01-211-4352
5306-01-211-4352 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-211-4352 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-211-4352 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-211-4352 is not classified as a special type of cargo when transported by water. 5306-01-211-4352 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-211-4352
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-01-211-4352 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE5E419V1862
- 03 Dec 2018
- Subscribe
- 1005
- Subscribe
- Subscribe
- Subscribe
- SPE5E918P3298
- 17 Aug 2018
- Subscribe
- 1500
- Subscribe
- Subscribe
- Subscribe
- SPE5E418V6204
- 25 Apr 2018
- Subscribe
- 159
- Subscribe
- Subscribe
- Subscribe
- SPE5E418V5481
- 03 Apr 2018
- Subscribe
- 90
- Subscribe
- Subscribe
- Subscribe
- SPE5E415V8067
- 29 Jun 2015
- Subscribe
- 700
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5306-01-211-4352 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: