Premium Information is available for this item - Upgrade for $1 a day
5306-01-176-2457
Machine Bolt
5306011762457 011762457 FF-S-85 B1821BH031G044L MS90727-28L
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. View more Machine Bolt
June 2023
14
Marketplace 5306-01-176-2457
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-176-2457 5+ Documents (More...)
United States (US) 4. 5306-01-176-2457 Marketplace Restrictions Approved Sources Datasheet Management
B1821BH031G044L BOLT,MACHINE 86 EA NS Request Quotation Subscribe to View Vendor Details...
Machine Bolt 5306011762457 011762457,FF-S-85 Account Upgrade 5306-01-176-2457Machine Bolt5306011762457
011762457 FF-S-85 B1821BH031G044L MS90727-28L -5306/us 5306-01-176-2457 Machine Bolt 5306011762457011762457
FF/S/85 BOLT,SELF-LOCKING 30 EA NS Request Quotation FFS85 BOLT,SELF-LOCKING 11 EA NS Request Quotation
FFS85 BOLT,SELF-LOCKING 94 EA NS Request Quotation FF-S-85 BOLT,SELF-LOCKING 200 EA NS Request Quotation
FFS85 BOLT,MACHINE 94 EA NS Request Quotation FF-S-85 BOLT,MACHINE 200 EA NS Request Quotation Subscribe
FFS85 BOLT,MACHINE 2 EA NS Request Quotation FF-S-85 BOLT,MACHINE 37 EA NS Request Quotation Subscribe
FFS85 SCREW,CAP,HEXAGON HEAD 11 EA NS Request Quotation FF/S/85 SCREW,CAP,HEXAGON HEAD 30 EA NS Request
FF-S-85 SCREW,CAP,HEXAGON HEAD 37 EA NS Request Quotation FFS85 SCREW,CAP,HEXAGON HEAD 2 EA NS Request
Restrictions 5306-01-176-2457
5306-01-176-2457 is a Machine Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-176-2457
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-176-2457
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTHD
- Slovenia (WL01)
- Effective Date:
- 1 Sep 2010
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
- Spain (YB01)
- Effective Date:
- 1 Jan 2008
- Australia (ZA01)
- Effective Date:
- 1 Jun 2003
- Italy (ZR01)
- Effective Date:
- 1 Sep 2005
Approved Sources 5306-01-176-2457
- Part Number
- Manufacturer
- Status
- B1821BH031G044L
- Manufacturer
- 80204 - American National Standards (Active)
- Primary Buy
- Primary Buy
- FF-S-85
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
- MS90727-28L
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-01-176-2457
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Fastener Length [AASB]
- 0.407 Inches Minimum And 0.438 Inches Maximum
- Features Provided [CBBL]
- Finished Head
- Hardness Rating [CQFM]
- 32.0 Rockwell C Minimum Overall And 38.0 Rockwell C Maximum Overall
- Head Height [AASU]
- 0.195 Inches Minimum And 0.211 Inches Maximum
- Head Style [AASK]
- Hexagon
- Material [MATT]
- Steel Overall
- Minimum Tensile Strength [CQBC]
- 150000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Nondefinitive Spec/Std Data [ZZZT]
- 2 Type And 10P Style And 8 Grade
- Locking Feature [AAUM]
- Patch Threads Or Strip Threads
- Material Document And Classification [MDCL]
- 66 Fed Std All Material Responses Overall
- Width Between Flats [AATB]
- 0.489 Inches Minimum And 0.500 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty2 Cl2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.303 Inches Minimum And 0.438 Inches Maximum
- Thread Series Designator [THSD]
- Unf
- Thread Quantity Per Inch [CMLP]
- 24
DLA Procurement Analysis 5306-01-176-2457
Management Data 5306-01-176-2457
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 0
- Non-combat Essential End Item
- Echelon Management:
- B2
- Material Identification:
- B
- Consumable Repair Parts
- Operational Test:
- No Special Procedures
Similar Supply Items to 5306-01-176-2457
Freight Information 5306-01-176-2457
5306-01-176-2457 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-176-2457 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-176-2457 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-176-2457 is not classified as a special type of cargo when transported by water. 5306-01-176-2457 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-176-2457
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-01-176-2457 1 Records
Contracting Technical Data File (CTDF) 5306-01-176-2457 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: