Premium Information is available for this item - Upgrade for $1 a day
5306-01-170-8485
Close Tolerance Bolt
5306011708485 011708485 LD111-0026-0405
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
November 2023
4
Marketplace 5306-01-170-8485
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-170-8485 3+ Documents (More...)
Close Tolerance Bolt 5306011708485 011708485 LD111-0026-0405 BOLT,CLOSE TOLERANCE 325 EA NS Request
FedMall Updated Every 15 Minutes 5306 Manufacturing, Inc (Active) Primary Buy RNCC 3 RNVC 2 DAC 5 LD111-0026-0405
Restrictions 5306-01-170-8485
5306-01-170-8485 is a Close Tolerance Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-170-8485
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-170-8485
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
Approved Sources 5306-01-170-8485
- Part Number
- Manufacturer
- Status
- LD111-0026-0405
- Manufacturer
- 23899 - J.W. Manufacturing, Inc (Active)
- Primary Buy
- Primary Buy
- LD111-0026-0405
- 27624 - Sps Technologies Llc (Active)
- Primary Buy
- Primary Buy
- LD111-0026-0405
- 57928 - Sonic Industries, Inc. (Active)
- Primary Buy
- Primary Buy
- LD111-0026-0405
- 73197 - Hi-Shear Corporation (Active)
- Primary Buy
- Primary Buy
- LD111-0026-0405
- 80539 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- LD111-0026-0405
- 06710 - Valley-Todeco, Inc. (Active)
- Primary Buy
- Primary Buy
- LD111-0026-0405
- 06725 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- LD111-0026-0405
- 17446 - Huck International, Inc. (Active)
- Primary Buy
- Primary Buy
- LD111-0026-0405
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- LD111-0026-0405
- L4528 - Lisi Aerospace Canada Corp (Active)
- Primary Buy
- Primary Buy
- LD111-0026-0405
- 43999 - The Boeing Company (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5306-01-170-8485
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Fastener Length [AASB]
- 0.694 Inches Minimum And 0.724 Inches Maximum
- Grip Diameter [AAUR]
- 0.2490 Inches Minimum And 0.2495 Inches Maximum
- Grip Length [ANEE]
- 0.302 Inches Minimum And 0.322 Inches Maximum
- Hardness Rating [CQFM]
- 46.0 Rockwell C Minimum Overall And 50.0 Rockwell C Maximum Overall
- Head Height [AASU]
- 0.164 Inches Nominal
- Head Style [AASK]
- Double Hexagon
- Material [MATT]
- Steel Comp Xm-13 Overall
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Material Document And Classification [MDCL]
- Ams 5629 Assn Std Single Material Response Overall
- Width Between Flats [AATB]
- 0.430 Inches Minimum And 0.439 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.372 Inches Minimum And 0.422 Inches Maximum
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 28
Weapon Systems (WSDC) 5306-01-170-8485
DLA Procurement Analysis 5306-01-170-8485
- Last Stock Position:
- 65 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-170-8485
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5306-01-170-8485
Freight Information 5306-01-170-8485
5306-01-170-8485 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-170-8485 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-170-8485 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-170-8485 is not classified as a special type of cargo when transported by water. 5306-01-170-8485 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-170-8485
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-01-170-8485 1 Records
Contracting Technical Data File (CTDF) 5306-01-170-8485 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: