Premium Information is available for this item - Upgrade for $1 a day
5306-01-133-1570
Close Tolerance Bolt
5306011331570 011331570 ST3M744-8D21 SLB748-8D21 VS3174-8D21 GS1015-8D21 AIC687-8D21 PBF1265-8D21 122895-8D21 WC744-8D21 11823-8D21 VCG0001-8D21 MB154-8D21 S406-8D21 10115910
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
November 2023
17
Marketplace 5306-01-133-1570
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-133-1570 1+ Documents (More...)
-8D21 VCG0001-8D21 MB154-8D21 S406-8D21 10115910 An externally threaded fastener whose unthreaded portion
ST3M744-8D21 BOLT,CLOSE TOLERANCE 18 EA NS Request Quotation Updated Every Day 5306-01-133-1570 RQST
Restrictions 5306-01-133-1570
5306-01-133-1570 is a Close Tolerance Bolt that is an aviation critical safety item or flight safety critical aircraft part. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5306-01-133-1570
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-133-1570
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Finland (WF01)
- Effective Date:
- 1 Jun 2009
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Malaysia (YW01)
- Effective Date:
- 1 Aug 1997
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5306-01-133-1570
- Part Number
- Manufacturer
- Status
- ST3M744-8D21
- Manufacturer
- 0ZC92 - Heartland Precision Fasteners Inc (Active)
- Primary Buy
- Primary Buy
- SLB748-8D21
- 16258 - Space-Lok, Inc. (Active)
- Primary Buy
- Primary Buy
- VS3174-8D21
- 17446 - Huck International, Inc (Active)
- Primary Buy
- Primary Buy
- GS1015-8D21
- 1EM77 - B & B Specialties Inc (Active)
- Primary Buy
- Primary Buy
- ST3M744-8D21
- 1VSL7 - Houston Precision Fasteners I Lp (Active)
- Primary Buy
- Primary Buy
- AIC687-8D21
- 06725 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- PBF1265-8D21
- 27624 - Sps Technologies Llc (Active)
- Primary Buy
- Primary Buy
- 122895-8D21
- 80539 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- WC744-8D21
- 60516 - West Coast Aerospace, Inc. (Active)
- Primary Buy
- Primary Buy
- ST3M744-8D21
- 58998 - Fastener Innovation Technology, Inc. (Active)
- Primary Buy
- Primary Buy
- VS3174-8D21
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- 11823-8D21
- 59563 - Reid Products Inc. (Active)
- Primary Buy
- Primary Buy
- 122895-8D21
- 56878 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- VCG0001-8D21
- 06710 - Valley-Todeco, Inc. (Active)
- Primary Buy
- Primary Buy
- MB154-8D21
- 73197 - Hi-Shear Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- S406-8D21
- 17446 - Huck International, Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MB154-8D21
- L4528 - Lisi Aerospace Canada Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- VS3174-8D21
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 122895-8D21
- 0PTK6 - Sps Technologies Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- S406-8D21
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 10115910
- A486G - Nimikkeistokeskus Ncb Finland (Active)
- NATO Reference
- NATO Reference
- ST3M744-8D21
- 76301 - The Boeing Company (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5306-01-133-1570
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 1.630 Inches Minimum All Holes And 1.660 Inches Maximum All Holes
- Fastener Length [AASB]
- 1.755 Inches Minimum And 1.775 Inches Maximum
- Grip Diameter [AAUR]
- 0.4990 Inches Minimum And 0.4995 Inches Maximum
- Grip Length [ANEE]
- 1.302 Inches Minimum And 1.322 Inches Maximum
- Head Height [AASU]
- 0.281 Inches Nominal
- Head Style [AASK]
- Spline Drive Shear Head
- Material [MATT]
- Steel Comp Xm-13 Overall
- Nominal Thread Diameter [AHYM]
- 0.500 Inches
- Material Document And Classification [MDCL]
- Ams 5629 Assn Std Single Material Response Overall
- Width Between Flats [AATB]
- 0.774 Inches Minimum And 0.782 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec 1St Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.433 Inches Minimum And 0.473 Inches Maximum
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 20
Weapon Systems (WSDC) 5306-01-133-1570
DLA Procurement Analysis 5306-01-133-1570
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-133-1570
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5306-01-133-1570
Freight Information 5306-01-133-1570
5306-01-133-1570 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-133-1570 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-133-1570 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-133-1570 is not classified as a special type of cargo when transported by water. 5306-01-133-1570 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-133-1570
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-01-133-1570 6 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A623PM847
- 15 May 2023
- Subscribe
- 21
- Subscribe
- Subscribe
- Subscribe
- SPE5EY19F4140
- 21 Dec 2018
- Subscribe
- 5
- Subscribe
- Subscribe
- Subscribe
- SPE5EY19F1748
- 31 Oct 2018
- Subscribe
- 33
- Subscribe
- Subscribe
- Subscribe
- SPE5E416V7055
- 24 May 2016
- Subscribe
- 80
- Subscribe
- Subscribe
- Subscribe
- SPE5E415V8713
- 15 Jul 2015
- Subscribe
- 55
- Subscribe
- Subscribe
- Subscribe
- SPE5E414V1845
- 18 Nov 2013
- Subscribe
- 30
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5306-01-133-1570 April 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: