Premium Information is available for this item - Upgrade for $1 a day
5306-01-078-8926
Machine Bolt
5306010788926 010788926 327239
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. View more Machine Bolt
November 2023
6
Marketplace 5306-01-078-8926
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-078-8926 5+ Documents (More...)
Restrictions 5306-01-078-8926
5306-01-078-8926 is a Machine Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item contains Silver.
Import and Export 5306-01-078-8926
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-078-8926
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Brazil (YA01)
- Effective Date:
- 1 Nov 2006
Approved Sources 5306-01-078-8926
- Part Number
- Manufacturer
- Status
- 327239
- Manufacturer
- 77445 - Rtx Corporation (Active)
- Primary Buy
- Primary Buy
- 327239
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- 327239
- U6683 - Linread Ltd (Active)
- Secondary Buy
- Secondary Buy
- 327239
- 8M938 - Pro/Des Inc Products Design Div (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 327239
- 5T572 - North Bridge Fasteners (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 327239
- 8W956 - Voi-Shan East Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-01-078-8926
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Extended Washer Diameter [AATC]
- 0.365 Inches Minimum And 0.385 Inches Maximum
- Extended Washer Thickness [AATD]
- 0.040 Inches Minimum And 0.050 Inches Maximum
- Fastener Length [AASB]
- 0.490 Inches Minimum And 0.510 Inches Maximum
- Grip Length [ANEE]
- 0.120 Inches Minimum And 0.140 Inches Maximum
- Head Height [AASU]
- 0.250 Inches Minimum And 0.270 Inches Maximum
- Head Style [AASK]
- Double Hexagon W/Hole
- Hole Diameter [AAUB]
- 0.060 Inches Minimum And 0.075 Inches Maximum
- Hole Configuration Style [CRHC]
- Double Hexagon Longitudinal Hole
- Hole Quantity [ASXK]
- 4
- Hole Type [BQDM]
- Drilled
- Material [MATT]
- Iron Alloy 660 Overall
- Nominal Thread Diameter [AHYM]
- 0.190 Inches
- Nonstandard Thread Pitch Diameter [CFSG]
- +0.1644/+0.1664 Inches
- Material Document And Classification [MDCL]
- Ams5732 Assn Std 1St Material Response Overall Or Ams7478 Assn Std 2Nd Material Response Overall
- Precious Material And Location [PMLC]
- Overall Silver
- Precious Material [PRMT]
- Silver
- Width Between Flats [AATB]
- 0.243 Inches Minimum And 0.251 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Ams2410 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Silver Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.350 Inches Minimum And 0.390 Inches Maximum
- Thread Series Designator [THSD]
- Uns
- Thread Quantity Per Inch [CMLP]
- 32
Weapon Systems (WSDC) 5306-01-078-8926
DLA Procurement Analysis 5306-01-078-8926
- Last Stock Position:
- 107 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-078-8926
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5306-01-078-8926
Freight Information 5306-01-078-8926
5306-01-078-8926 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-078-8926 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-078-8926 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-078-8926 is not classified as a special type of cargo when transported by water. 5306-01-078-8926 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-078-8926
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- 10
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-01-078-8926 2 Records
Contracting Technical Data File (CTDF) 5306-01-078-8926 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: