Premium Information is available for this item - Upgrade for $1 a day
5306-01-077-0171
Close Tolerance Bolt
5306010770171 010770171 ST3M735-4-104 121673-4-104
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
November 2023
5
Marketplace 5306-01-077-0171
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-077-0171 1+ Documents (More...)
ST3M735-4-104 BOLT,CLOSE TOLERANCE 9 EA NS Request Quotation Updated Every Day 5306-01-077-0171 RQST
NE Updated Every Day 5306-01-077-0171 RQST Updated Every Day 5306-01-077-0171 RQST NE Related Documents
Restrictions 5306-01-077-0171
5306-01-077-0171 is a Close Tolerance Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5306-01-077-0171
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-077-0171
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 2008
Approved Sources 5306-01-077-0171
- Part Number
- Manufacturer
- Status
- ST3M735-4-104
- Manufacturer
- 76301 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- ST3M735-4-104
- 0UCY9 - M.S. Aerospace Inc. (Active)
- Secondary Buy
- Secondary Buy
- 121673-4-104
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5306-01-077-0171
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 6.818 Inches Minimum First Hole And 6.848 Inches Maximum First Hole
- Fastener Length [AASB]
- 6.918 Inches Minimum And 6.938 Inches Maximum
- Grip Diameter [AAUR]
- 0.2483 Inches Minimum And 0.2492 Inches Maximum
- Grip Length [ANEE]
- 6.500 Inches Minimum And 6.516 Inches Maximum
- Hardness Rating [CQFM]
- 36.0 Rockwell C Minimum Overall And 41.0 Rockwell C Maximum Overall
- Head Height [AASU]
- 0.126 Inches Minimum And 0.141 Inches Maximum
- Head Style [AASK]
- Dished Hexagon
- Material [MATT]
- Steel Comp E4340 Overall Or Steel Comp 4140 Overall Or Steel Comp 8740 Overall Or Steel Comp 4130 Overall Or Steel Comp 6150 Overall
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Shank Unthreaded Hole Diameter [AAWB]
- 0.076 Inches Minimum First Hole And 0.086 Inches Maximum First Hole
- Special Features [FEAT]
- Detent Ring In Shank
- Width Between Flats [AATB]
- 0.430 Inches Minimum And 0.439 Inches Maximum
- Specification/Standard Data [ZZZK]
- 76301-St3-735 Manufacturers Standard
- Surface Finish [CSYM]
- 63.0 Microinches Bearing Surface Of Head
- Surface Finish [CSYM]
- 63.0 Microinches Grip
- Surface Treatment Document And Classification [STDC]
- Qq-P-416 Ty 2 Cl 2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.282 Inches Minimum And 0.333 Inches Maximum
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 28
Weapon Systems (WSDC) 5306-01-077-0171
DLA Procurement Analysis 5306-01-077-0171
- Last Stock Position:
- 258 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-01-077-0171
Similar Supply Items to 5306-01-077-0171
Freight Information 5306-01-077-0171
5306-01-077-0171 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-077-0171 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-077-0171 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-01-077-0171 is not classified as a special type of cargo when transported by water. 5306-01-077-0171 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-01-077-0171
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-01-077-0171 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE5E416V3863
- 23 Feb 2016
- Subscribe
- 17
- Subscribe
- Subscribe
- Subscribe
- SPE5E415V3284
- 06 Feb 2015
- Subscribe
- 23
- Subscribe
- Subscribe
- Subscribe
- SPE5E415M0524
- 20 Nov 2014
- Subscribe
- 118
- Subscribe
- Subscribe
- Subscribe
- SPE5E413V1944
- 18 Sep 2013
- Subscribe
- 103
- Subscribe
- Subscribe
- Subscribe
- SPM5E413V1551
- 23 Jan 2013
- Subscribe
- 5
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5306-01-077-0171 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: