Premium Information is available for this item - Upgrade for $1 a day
5306-01-061-4077
Machine Bolt
5306010614077 010614077 NASM35308 MS35308-350
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. View more Machine Bolt
May 2023
14
Marketplace 5306-01-061-4077
Request a Quotation from participating marketplace vendors
Related Documents 5306-01-061-4077 5+ Documents (More...)
a day Upgrade your Account Upgrade 5305-01-426-1792Hexagon Head Cap Screw5305014261792 014261792 NASM35308
a day Upgrade your Account Upgrade 5305-00-947-7045Hexagon Head Cap Screw5305009477045 009477045 NASM35308
a day Upgrade your Account Upgrade 5305-01-426-1792Hexagon Head Cap Screw5305014261792 014261792 NASM35308
a day Upgrade your Account Upgrade 5305-00-947-7045Hexagon Head Cap Screw5305009477045 009477045 NASM35308
a day Upgrade your Account Upgrade 5305-00-947-7045Hexagon Head Cap Screw5305009477045 009477045 NASM35308
a day Upgrade your Account Upgrade 5305-00-590-7863Hexagon Head Cap Screw5305005907863 005907863 NASM35308
a day Upgrade your Account Upgrade 5305-00-590-7863Hexagon Head Cap Screw5305005907863 005907863 NASM35308
NumberManufacturerStatusMS35308-468 80205 - National Aerospace Standards (Active) Primary Buy RNCC 3 RNVC 2 DAC E NASM35308
Restrictions 5306-01-061-4077
5306-01-061-4077 is a Machine Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5306-01-061-4077
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-01-061-4077
- US Air Force (FUGI)
- Effective Date:
- 1 Apr 2015
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5306-01-061-4077
- Part Number
- Manufacturer
- Status
- MS35308-350
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- NASM35308
- 96906 - Military Standards (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- MS35308-350
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-01-061-4077
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Fastener Length [AASB]
- 4.406 Inches Minimum And 4.500 Inches Maximum
- Features Provided [CBBL]
- Finished Head
- Head Height [AASU]
- 0.195 Inches Minimum And 0.211 Inches Maximum
- Head Style [AASK]
- Hexagon
- Material [MATT]
- Steel Corrosion Resisting Overall
- Minimum Tensile Strength [CQBC]
- 4640 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Width Between Flats [AATB]
- 0.489 Inches Minimum And 0.500 Inches Maximum
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Quantity Per Inch [CMLP]
- 24
- Thread Series Designator [THSD]
- Unf
DLA Procurement Analysis 5306-01-061-4077
Management Data 5306-01-061-4077
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5306-01-061-4077
Freight Information 5306-01-061-4077
5306-01-061-4077 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-01-061-4077 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-01-061-4077 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 671 for ocean manifesting and military sealift. 5306-01-061-4077 is not classified as a special type of cargo when transported by water. 5306-01-061-4077 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5306-01-061-4077 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: