Premium Information is available for this item - Upgrade for $1 a day
5306-00-990-1606
Machine Bolt
5306009901606 009901606 NAS1005-36A
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. View more Machine Bolt
August 2023
14
Marketplace 5306-00-990-1606
Request a Quotation from participating marketplace vendors
Related Documents 5306-00-990-1606 5+ Documents (More...)
Machine Bolt 5306009901606 009901606 5306-00-990-1606 5306009901606 009901606 is an externally
Machine Bolt 5306009901606 009901606 5306-00-990-1606 5306009901606 009901606 is an externally
Machine Bolt 5306009901606 009901606 5306-00-990-1606 5306009901606 009901606 is an externally
Machine Bolt 5306009901606 009901606 5306-00-990-1606 5306009901606 009901606 is an externally
Restrictions 5306-00-990-1606
5306-00-990-1606 is a Machine Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5306-00-990-1606
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-00-990-1606
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- NASA (G860)
- Effective Date:
- 1 Apr 1991
- US Marine Corps (MC47)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Supplementary Collaborators:
- HD
Approved Sources 5306-00-990-1606
- Part Number
- Manufacturer
- Status
- NAS1005-36A
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- NAS1005-36A
- 73197 - Hi-Shear Corporation (Active)
- Primary Buy
- Primary Buy
- NAS1005-36A
- 30485 - Qualified Air Components Inc. (Active)
- Primary Buy
- Primary Buy
- NAS1005-36A
- 50568 - Apcom Inc (Active)
- Primary Buy
- Primary Buy
- NAS1005-36A
- 58998 - Fastener Innovation Technology, Inc. (Active)
- Primary Buy
- Primary Buy
- NAS1005-36A
- 80539 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- NAS1005-36A
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- NAS1005-36A
- L4528 - Lisi Aerospace Canada Corp (Active)
- Primary Buy
- Primary Buy
- NAS1005-36A
- 17446 - Huck International, Inc. (Active)
- Primary Buy
- Primary Buy
- NAS1005-36A
- 07851 - Nor-Cal Supply Co.Inc. (Active)
- Secondary Buy
- Secondary Buy
- NAS1005-36A
- 28977 - Accurate Precision Fastener Corp. (Active)
- Secondary Buy
- Secondary Buy
- NAS1005-36A
- 53606 - Plastic And Metal Products (Active)
- Secondary Buy
- Secondary Buy
- NAS1005-36A
- 56878 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- NAS1005-36A
- 04348 - Lawrence Engineering And Supply Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- NAS1005-36A
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- NAS1005-36A
- 08938 - Air Industries Co Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- NAS1005-36A
- 30902 - F And C Sales Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- NAS1005-36A
- 71563 - Collins Engineering Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- NAS1005-36A
- 82172 - Durham Aircraft Service Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-00-990-1606
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Fastener Length [AASB]
- 2.867 Inches Minimum And 2.897 Inches Maximum
- Features Provided [CBBL]
- Finished Head
- Grip Length [ANEE]
- 2.235 Inches Minimum And 2.265 Inches Maximum
- Head Height [AASU]
- 0.172 Inches Minimum And 0.204 Inches Maximum
- Head Style [AASK]
- Hexagon
- Material [MATT]
- Iron Alloy 660 Overall
- Minimum Tensile Strength [CQBC]
- 14000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Material Document And Classification [MDCL]
- Ams 5732 Assn Std Single Material Response Overall
- Width Between Flats [AATB]
- 0.492 Inches Minimum And 0.501 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Mil-S-5002 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.602 Inches Minimum And 0.662 Inches Maximum
- Thread Series Designator [THSD]
- Unf
- Thread Quantity Per Inch [CMLP]
- 24
Weapon Systems (WSDC) 5306-00-990-1606
DLA Procurement Analysis 5306-00-990-1606
Management Data 5306-00-990-1606
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 5306-00-990-1606
Freight Information 5306-00-990-1606
5306-00-990-1606 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-00-990-1606 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-00-990-1606 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-00-990-1606 is not classified as a special type of cargo when transported by water. 5306-00-990-1606 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-00-990-1606
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5306-00-990-1606 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: