Premium Information is available for this item - Upgrade for $1 a day
5306-00-655-7447
Close Tolerance Bolt
5306006557447 006557447 MIL-B-6812 MILB6812
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
May 2023
4
Marketplace 5306-00-655-7447
Request a Quotation from participating marketplace vendors
Related Documents 5306-00-655-7447 5+ Documents (More...)
MIL-B-6812 BOLT,CLOSE TOLERANCE 63 EA NS Request Quotation MILB6812 BOLT,CLOSE TOLERANCE 6 EA NS Request
MILB6812 BOLT,CLOSE TOLERANCE 354 EA NS Request Quotation FedMall Updated Every 15 Minutes 5306-00-655
MILB6812 BOLT,MACHINE RQST NS Request Quotation Subscribe to View Vendor Details...
BOLT,MACHINE 63 EA NS Request Quotation MILB6812 MILB6812 BOLT,MACHINE RQST NS Request Quotation
MILB6812 BOLT,MACHINE RQST NS Request Quotation Subscribe to View Vendor Details...
Close Tolerance Bolt 5306006557447 006557447 MILB6812 BOLT,CLOSE TOLERANCE RQST NS Request Quotation
MILB6812 BOLT,SHOULDER 6 EA NS Request Quotation MIL-B-6812 BOLT,SHOULDER 63 EA NS Request Quotation
BOLT,SHOULDER 63 EA NS Request Quotation MILB6812 BOLT,SHOULDER 6 EA NS Request Quotation MIL-B-
MILB6812 BOLT,SHOULDER 6 EA NS Request Quotation MIL-B-6812 BOLT,SHOULDER 63 EA NS Request Quotation
BOLT,SHOULDER 63 EA NS Request Quotation MILB6812 BOLT,SHOULDER 6 EA NS Request Quotation MIL-B-
Restrictions 5306-00-655-7447
5306-00-655-7447 is a Close Tolerance Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5306-00-655-7447
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-00-655-7447
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- KE
Approved Sources 5306-00-655-7447
- Part Number
- Manufacturer
- Status
- MIL-B-6812
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- MILB6812
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5306-00-655-7447
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Fastener Length [AASB]
- 1.031 Inches Nominal
- Grip Diameter [AAUR]
- 0.1889 Inches Minimum And 0.1894 Inches Maximum
- Grip Length [ANEE]
- 0.625 Inches Nominal
- Head Height [AASU]
- 0.109 Inches Minimum And 0.141 Inches Maximum
- Head Style [AASK]
- Hexagon
- Material [MATT]
- Aluminum Overall Or Aluminum Alloy 2024 Overall Or Aluminum Alloy 1100 Overall Or Aluminum Alloy 2017 Overall Or Aluminum Alloy 2024 Overall Or Aluminum Alloy 2117 Overall Or Aluminum Alloy 5056 Overall
- Minimum Tensile Strength [CQBC]
- 62000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.1904 Inches
- Width Between Flats [AATB]
- 0.365 Inches Minimum And 0.377 Inches Maximum
- Surface Finish [CSYM]
- 63.0 Microinches Bearing Surface Of Head
- Surface Finish [CSYM]
- 63.0 Microinches Grip
- Surface Treatment Document And Classification [STDC]
- Mil-C-5541 Mil Spec 1St Treatment Response Overall And Mil-A-8625 Mil Spec 2Nd Treatment Response Overall
- Surface Treatment [SFTT]
- Oxide Film Overall And Anodize Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.406 Inches Minimum
- Thread Quantity Per Inch [CMLP]
- 32
- Thread Series Designator [THSD]
- Unf
DLA Procurement Analysis 5306-00-655-7447
Management Data 5306-00-655-7447
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5306-00-655-7447
Freight Information 5306-00-655-7447
5306-00-655-7447 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 013280. A Sub NMFC of X. It has a NMFC Description of ALUM BOLTS. 5306-00-655-7447 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 05450 which rates the freight between FCL and LCL. 5306-00-655-7447 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5306-00-655-7447 is not classified as a special type of cargo when transported by water. 5306-00-655-7447 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-00-655-7447
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5306-00-655-7447 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: