5306-00-614-7082

5975-22-614-7082 5975226147082 226147082 is an open frame structure specifically designed to accommodate (but does not include) electronic terminal junctions (terminal board; terminal (1), feedthru; and the like). the item may consist of separable or nonseparable channels, mounting blocks and fastening devices. mounting blocks are designed so the assembly can be mounted on panels or bulkheads. tightening the fastening devices which secure the channels to the mounting blocks will also secure terminal junctions within the frame assembly. excludes rack, electrical equipment; terminal board; junction box; and hardware kit, electronic equipment.

5930-99-614-7082 5930996147082 996147082 STEM,PISTON

1 Jan 1960 1005-00-918-9942 Nose Reloading Gate 65B9811RNCC: 5 | RNVC: 2 | DAC: X 1 Jan 1960 5306-00-614-7082

4730-01-614-7082 4730016147082 016147082 is a straight one-piece metallic pipe 12 inches(304 mm)or less in length having external threads of the same size on both ends. it may have a center section which is externally shaped to accommodate a wrench. for pipe having internal threads 12 inches(304 mm)or less in length see coupling,pipe. for pipe in excess of 12 inches(304 mm)see pipe as modified.

3120-99-736-0333 3120997360333 997360333 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.