Premium Information is available for this item - Upgrade for $1 a day
5306-00-594-7664
Close Tolerance Bolt
5306005947664 005947664 BM3326-3-10 MB84-3-10 VS3060-3-10 VAL23033-3-10 PBF23T-3P-10 74328-3-10 ST3M571-3-10 AIC752-3-10 S371-3-10 GS1030-3-10 11831-3-10 A1C752-3-10
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
November 2023
24
Marketplace 5306-00-594-7664
Request a Quotation from participating marketplace vendors
Related Documents 5306-00-594-7664 4+ Documents (More...)
Restrictions 5306-00-594-7664
5306-00-594-7664 is a Close Tolerance Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5306-00-594-7664
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-00-594-7664
- US Air Force (FUGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FUKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 5306-00-594-7664
- Part Number
- Manufacturer
- Status
- BM3326-3-10
- Manufacturer
- 17446 - Huck International, Inc. (Active)
- Primary Buy
- Primary Buy
- BM3326-3-10
- 97928 - Huck Intl Inc (Replaced)
- Original Design
- Original Design
- MB84-3-10
- C4293 - Fairchild Fasteners Europe - Vsd (Active)
- Secondary Buy
- Secondary Buy
- VS3060-3-10
- C4293 - Fairchild Fasteners Europe - Vsd (Active)
- Secondary Buy
- Secondary Buy
- VAL23033-3-10
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- PBF23T-3P-10
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- MB84-3-10
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- MB84-3-10
- R1120 - Satair A/S (Active)
- Secondary Buy
- Secondary Buy
- 74328-3-10
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- MB84-3-10
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- ST3M571-3-10
- 007R1 - Twist Tite Mfg., Inc. (Active)
- Secondary Buy
- Secondary Buy
- AIC752-3-10
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- VS3060-3-10
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- S371-3-10
- 17446 - Huck International, Inc. (Active)
- Secondary Buy
- Secondary Buy
- GS1030-3-10
- 1EM77 - B & B Specialties, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 11831-3-10
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- A1C752-3-10
- 06725 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- VS3060-3-10
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 74328-3-10
- 56878 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- S371-3-10
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- ST3M571-3-10
- 76301 - The Boeing Company (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5306-00-594-7664
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Extended Washer Diameter [AATC]
- 0.340 Inches Minimum And 0.350 Inches Maximum
- Extended Washer Thickness [AATD]
- 0.054 Inches Minimum And 0.074 Inches Maximum
- Fastener Length [AASB]
- 1.007 Inches Minimum And 1.037 Inches Maximum
- Grip Diameter [AAUR]
- 0.1890 Inches Minimum And 0.1895 Inches Maximum
- Grip Length [ANEE]
- 0.490 Inches Minimum And 0.510 Inches Maximum
- Head Height [AASU]
- 0.265 Inches Minimum And 0.275 Inches Maximum
- Head Style [AASK]
- Double Hexagon Extended Washer
- Material [MATT]
- Steel Corrosion Resisting Overall
- Minimum Tensile Strength [CQBC]
- 220000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.190 Inches
- Width Between Flats [AATB]
- 0.243 Inches Minimum And 0.251 Inches Maximum
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.327 Inches Minimum And 0.347 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 32
- Thread Series Designator [THSD]
- Unjf
Weapon Systems (WSDC) 5306-00-594-7664
DLA Procurement Analysis 5306-00-594-7664
- Last Stock Position:
- 78 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-00-594-7664
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- BF
- F-4 (PHANTOM II)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5306-00-594-7664
Freight Information 5306-00-594-7664
5306-00-594-7664 has freight characteristics managed by Germany.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-00-594-7664 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-00-594-7664 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-00-594-7664 is not classified as a special type of cargo when transported by water. 5306-00-594-7664 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-00-594-7664
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- 10
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-00-594-7664 7 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE5E318V5533
- 16 May 2018
- Subscribe
- 32
- Subscribe
- Subscribe
- Subscribe
- SPE5E417V3513
- 18 Jan 2017
- Subscribe
- 30
- Subscribe
- Subscribe
- Subscribe
- SPE5E417V1916
- 25 Nov 2016
- Subscribe
- 99
- Subscribe
- Subscribe
- Subscribe
- SPE5E417V1527
- 14 Nov 2016
- Subscribe
- 70
- Subscribe
- Subscribe
- Subscribe
- SPE5E416V8406
- 06 Jul 2016
- Subscribe
- 34
- Subscribe
- Subscribe
- Subscribe
- SPE5E416V4995
- 28 Mar 2016
- Subscribe
- 30
- Subscribe
- Subscribe
- Subscribe
- SPE5E414V6390
- 25 Mar 2014
- Subscribe
- 10
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5306-00-594-7664 February 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: