Premium Information is available for this item - Upgrade for $1 a day
5306-00-448-7450
Shoulder Bolt
5306004487450 004487450 BM4356CR6-440 AIC4356CR6440 VCB0008C6-6-440 PBF4356CR6-440 71657CR6-6440 SII 1058CR6-440 VS2986CR6-440 C4356CR6440 C4356CR-0440
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW. View more Shoulder Bolt
May 2023
8
Marketplace 5306-00-448-7450
Request a Quotation from participating marketplace vendors
Related Documents 5306-00-448-7450 3+ Documents (More...)
Restrictions 5306-00-448-7450
5306-00-448-7450 is a Shoulder Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5306-00-448-7450
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-00-448-7450
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5306-00-448-7450
- Part Number
- Manufacturer
- Status
- AIC4356CR6440
- Manufacturer
- 06725 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- VCB0008C6-6-440
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- PBF4356CR6-440
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- 71657CR6-6440
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- SII 1058CR6-440
- 57928 - Sonic Industries, Inc. (Active)
- Secondary Buy
- Secondary Buy
- VS2986CR6-440
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- BM4356CR6-440
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- C4356CR-0440
- 57528 - Arrow Electronics Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- C4356CR6440
- 81755 - Lockheed Martin Corporation (Active)
- Vendor Drawing
- Vendor Drawing
- BM4356CR6-440
- 17446 - Huck International, Inc. (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5306-00-448-7450
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 0.645 Inches Minimum First Hole And 0.665 Inches Maximum First Hole
- Fastener Length [AASB]
- 0.805 Inches Minimum And 0.825 Inches Maximum
- Hardness Rating [CQFM]
- 47.0 Rockwell C Minimum Overall And 50.0 Rockwell C Maximum Overall
- Head Height [AASU]
- 0.172 Inches Minimum And 0.204 Inches Maximum
- Head Style [AASK]
- Hexagon
- Material [MATT]
- Steel Comp H11 Overall
- Minimum Tensile Strength [CQBC]
- 220000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Material Document And Classification [MDCL]
- Ams 6487 Assn Std Single Material Response Overall
- Shank Unthreaded Hole Diameter [AAWB]
- 0.076 Inches Minimum First Hole And 0.086 Inches Maximum First Hole
- Shoulder Diameter [AATN]
- 0.3735 Inches Minimum First Shoulder And 0.3745 Inches Maximum First Shoulder
- Shoulder Length [AATX]
- 0.430 Inches Minimum First Shoulder And 0.450 Inches Maximum First Shoulder
- Shoulder Shape [CWYB]
- Round First Shoulder
- Width Between Flats [AATB]
- 0.492 Inches Minimum And 0.502 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-C-320 Fed Spec Single Treatment Response Overall And Nas 672 Assn Std 1St Treatment Response Overall
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.261 Inches Minimum And 0.281 Inches Maximum
- Thread Direction [AAJF]
- Right-Hand
- Thread Quantity Per Inch [CMLP]
- 24
- Thread Series Designator [THSD]
- Unf
DLA Procurement Analysis 5306-00-448-7450
Management Data 5306-00-448-7450
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5306-00-448-7450
Freight Information 5306-00-448-7450
5306-00-448-7450 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-00-448-7450 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-00-448-7450 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-00-448-7450 is not classified as a special type of cargo when transported by water. 5306-00-448-7450 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-00-448-7450
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5306-00-448-7450 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: