Premium Information is available for this item - Upgrade for $1 a day
5306-00-417-4268
Externally Relieved Body Bolt
5306004174268 004174268 232285Y17
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY. View more Externally Relieved Body Bolt
May 2023
1
Marketplace 5306-00-417-4268
Request a Quotation from participating marketplace vendors
Related Documents 5306-00-417-4268 2+ Documents (More...)
Updated Every Day 5306-00-417-4268 RQST NE Related Documents 5306-00-417-4268 2+ Documents ( More...
) https//www.nsnlookup.com /fsg-53/fsc-5306/us 5306-00-417-4268 Externally Relieved Body Bolt 5306004174268
Externally Relieved Body Bolt 5306004174268 BUY NE FedMall Updated Every Day 5306-00-417-4268 RQST
NE Updated Every Day 5306-00-417-4268 RQST Updated Every Day 5306-00-417-4268 RQST NE Related Documents
Restrictions 5306-00-417-4268
5306-00-417-4268 is a Externally Relieved Body Bolt This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5306-00-417-4268
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- Supplementary Collaborators:
- HX
- United States of America (ZZ)
Approved Sources 5306-00-417-4268
- Part Number
- Manufacturer
- Status
- 232285Y17
- Manufacturer
- 0AHP5 - Curtiss-Wright Controls, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 5306-00-417-4268
- Characteristic
- Specifications
- Thread Series Designator [THSD]
- Specifications
- Unf
- Nominal Thread Diameter [AHYM]
- 0.438 Inches
- Thread Quantity Per Inch [CMLP]
- 20
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.560 Inches Minimum And
- Thread Length [AASA]
- 0.580 Inches Maximum
- Fastener Length [AASB]
- 1.640 Inches Minimum And
- Fastener Length [AASB]
- 1.650 Inches Maximum
- Material [MATT]
- Steel Comp 8740 Overall
- Material Document And Classification [MDCL]
- Ams 6322 Assn Std Single Material Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Surface Treatment Document And Classification [STDC]
- Ams 2400 Assn Std Single Treatment Response Overall
- Hardness Rating [CQFM]
- 32.0 Rockwell C Minimum And
- Hardness Rating [CQFM]
- 36.0 Rockwell C Maximum Overall
- Head Style [AASK]
- Round W/Wrench Flats Chamfered
- Head Diameter [AASL]
- 0.880 Inches Nominal
- Head Height [AASU]
- 0.270 Inches Minimum And
- Head Height [AASU]
- 0.280 Inches Maximum
- Width Between Flats [AATB]
- 0.530 Inches Nominal
- Externally Relieved Body Diameter Quantity [CSNG]
- 2
- First Diameter From Head [AAWC]
- 0.5045 Inches Minimum And
- First Diameter From Head [AAWC]
- 0.5050 Inches Maximum
- Second Diameter From Head [AAWD]
- 0.360 Inches Nominal
- Distance From Largest Bearing Surface Of Head To End Of First Diameter [AAWH]
- 0.730 Inches Minimum And
- Distance From Largest Bearing Surface Of Head To End Of First Diameter [AAWH]
- 0.740 Inches Maximum
- Distance From Largest Bearing Surface Of Head To End Of Second Diameter [AAWJ]
- 1.070 Inches Minimum And
- Distance From Largest Bearing Surface Of Head To End Of Second Diameter [AAWJ]
- 1.080 Inches Maximum
- Special Features [FEAT]
- Outer Edge Of One Wrench Flat Chamfered 45 Deg To A Depth Of 0.280 In. Min,0.300 In. Max
- Test Data Document [TEST]
- 81343-Ams 2640 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Criticality Code Justification [CRTL]
- Aawc
- Design Control Reference Or Manufacturers Code [SR-5]
- Design Control Reference Or Manufacturers Code [SR-5]
- 0Ahp5
- Design Control Reference Or Manufacturers Code [SR-5]
- 232285Y17
DLA Procurement Analysis 5306-00-417-4268
Management Data 5306-00-417-4268
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5306-00-417-4268
Freight Information 5306-00-417-4268
5306-00-417-4268 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-00-417-4268 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-00-417-4268 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-00-417-4268 is not classified as a special type of cargo when transported by water. 5306-00-417-4268 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5306-00-417-4268 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: