Premium Information is available for this item - Upgrade for $1 a day
5306-00-357-1829
Close Tolerance Bolt
5306003571829 003571829 VAL23029-7D24 FIT7047-7D24 109453-7D24 11825-7D24 AIC753-7D24 VS3204-7D24 MB61-7D24 US3204-7D24 GS1016-7D24 PBF1253-7D24 S11-1060-7D24 ST3M453-7D24 BM17019-7D24
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
November 2023
14
Marketplace 5306-00-357-1829
Request a Quotation from participating marketplace vendors
Related Documents 5306-00-357-1829 1+ Documents (More...)
-7D24 PBF1253-7D24 S11-1060-7D24 ST3M453-7D24 BM17019-7D24 An externally threaded fastener whose unthreaded
ST3M453-7D24 BOLT,CLOSE TOLERANCE 125 EA NS Request Quotation Updated Every Day 5306-00-357-1829 RQST
Restrictions 5306-00-357-1829
5306-00-357-1829 is a Close Tolerance Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5306-00-357-1829
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-00-357-1829
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- Singapore (YJ01)
- Effective Date:
- 1 Sep 2012
- Republic of Korea (ZH01)
- Effective Date:
- 1 Oct 2009
Approved Sources 5306-00-357-1829
- Part Number
- Manufacturer
- Status
- VAL23029-7D24
- Manufacturer
- 06710 - Valley-Todeco, Inc. (Active)
- Primary Buy
- Primary Buy
- FIT7047-7D24
- 58998 - Fastener Innovation Technology, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 109453-7D24
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 11825-7D24
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- AIC753-7D24
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- VS3204-7D24
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- MB61-7D24
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- US3204-7D24
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- 109453-7D24
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- ST3M453-7D24
- 0JV78 - J M Precision Inc (Active)
- Secondary Buy
- Secondary Buy
- GS1016-7D24
- 1EM77 - B & B Specialties Inc (Active)
- Secondary Buy
- Secondary Buy
- PBF1253-7D24
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- S11-1060-7D24
- 57928 - Sonic Industries, Inc. (Active)
- Secondary Buy
- Secondary Buy
- MB61-7D24
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- ST3M453-7D24
- 59764 - Kenaloy Products Inc Sub Masco Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- BM17019-7D24
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 109453-7D24
- 50392 - Sps Technologies Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- ST3M453-7D24
- 58845 - Abounding Security Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ST3M453-7D24
- 76301 - The Boeing Company (Active)
- Vendor Drawing
- Vendor Drawing
- BM17019-7D24
- 17446 - Huck International, Inc (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5306-00-357-1829
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 1.955 Inches Minimum First Hole And 2.012 Inches Maximum First Hole
- Fastener Length [AASB]
- 2.083 Inches Minimum And 2.130 Inches Maximum
- Grip Diameter [AAUR]
- 0.4365 Inches Minimum And 0.4370 Inches Maximum
- Grip Length [ANEE]
- 1.490 Inches Minimum And 1.510 Inches Maximum
- Head Height [AASU]
- 0.247 Inches Minimum And 0.267 Inches Maximum
- Head Style [AASK]
- Double Hexagon
- Material [MATT]
- Steel Corrosion Resisting Overall
- Nominal Thread Diameter [AHYM]
- 0.437 Inches
- Shank Unthreaded Hole Diameter [AAWB]
- 0.106 Inches Minimum First Hole And 0.111 Inches Maximum First Hole
- Width Between Flats [AATB]
- 0.678 Inches Minimum And 0.689 Inches Maximum
- Specification/Standard Data [ZZZK]
- 08524-B-17019 Manufacturers Standard
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.573 Inches Minimum And 0.640 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 20
- Thread Series Designator [THSD]
- Unf
Weapon Systems (WSDC) 5306-00-357-1829
DLA Procurement Analysis 5306-00-357-1829
Management Data 5306-00-357-1829
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5306-00-357-1829
Freight Information 5306-00-357-1829
5306-00-357-1829 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-00-357-1829 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-00-357-1829 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-00-357-1829 is not classified as a special type of cargo when transported by water. 5306-00-357-1829 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-00-357-1829
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5306-00-357-1829 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- P
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: