Premium Information is available for this item - Upgrade for $1 a day
5306-00-321-9307
Close Tolerance Bolt
5306003219307 003219307 FIT7047-5D16 S11-1060-5D16 VAL23029-5D16 MB61-5D16 ST3M453-5D16 SLB252-5D16 BM17019-5D16 11825-5D16 VS3204-5D16 PBF1253-5D16 AIC753-5D16 HP5453-5D16 GS1016-5D16 WC453-5D16 US3204-5D16 KS3020-5D16 109453-5D16 S353-5D16 MA5453-5D16 10114234
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE. View more Close Tolerance Bolt
November 2023
22
Marketplace 5306-00-321-9307
Request a Quotation from participating marketplace vendors
Related Documents 5306-00-321-9307 1+ Documents (More...)
VS3204-5D16 PBF1253-5D16 AIC753-5D16 HP5453-5D16 GS1016-5D16 WC453-5D16 US3204-5D16 KS3020-5D16 109453
-5D16 S353-5D16 MA5453-5D16 10114234 An externally threaded fastener whose unthreaded portion is of a
Restrictions 5306-00-321-9307
5306-00-321-9307 is a Close Tolerance Bolt that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5306-00-321-9307
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5306-00-321-9307
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Finland (WF01)
- Effective Date:
- 1 Aug 2009
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Singapore (YJ01)
- Effective Date:
- 1 Jun 2012
- Malaysia (YW01)
- Effective Date:
- 1 Aug 1997
- Australia (ZA01)
- Effective Date:
- 1 Aug 1994
- Republic of Korea (ZH01)
- Effective Date:
- 1 Oct 2009
Approved Sources 5306-00-321-9307
- Part Number
- Manufacturer
- Status
- ST3M453-5D16
- Manufacturer
- 76301 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- FIT7047-5D16
- 58998 - Fastener Innovation Technology, Inc. (Active)
- Secondary Buy
- Secondary Buy
- S11-1060-5D16
- 57928 - Sonic Industries, Inc. (Active)
- Secondary Buy
- Secondary Buy
- VAL23029-5D16
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- MB61-5D16
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- ST3M453-5D16
- 0UCY9 - M.S. Aerospace Inc. (Active)
- Secondary Buy
- Secondary Buy
- SLB252-5D16
- 16258 - Space-Lok, Inc. (Active)
- Secondary Buy
- Secondary Buy
- BM17019-5D16
- 17446 - Huck International, Inc (Active)
- Secondary Buy
- Secondary Buy
- 11825-5D16
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- VS3204-5D16
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- 109453-5D16
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- ST3M453-5D16
- 1VSL7 - Houston Precision Fasteners I Lp (Active)
- Secondary Buy
- Secondary Buy
- 109453-5D16
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- MB61-5D16
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- PBF1253-5D16
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- AIC753-5D16
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- HP5453-5D16
- 0ZC92 - Heartland Precision Fasteners Inc (Active)
- Secondary Buy
- Secondary Buy
- VS3204-5D16
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- GS1016-5D16
- 1EM77 - B & B Specialties Inc (Active)
- Secondary Buy
- Secondary Buy
- WC453-5D16
- 60516 - West Coast Aerospace, Inc. (Active)
- Secondary Buy
- Secondary Buy
- US3204-5D16
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- KS3020-5D16
- 59764 - Kenaloy Products Inc Sub Masco Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 109453-5D16
- 50392 - Sps Technologies Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- S353-5D16
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- S353-5D16
- 17446 - Huck International, Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MA5453-5D16
- 58845 - Abounding Security Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BM17019-5D16
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 10114234
- A486G - Nimikkeistokeskus Ncb Finland (Active)
- NATO Reference
- NATO Reference
Datasheet 5306-00-321-9307
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 1.327 Inches Minimum First Hole And 1.384 Inches Maximum First Hole
- Fastener Length [AASB]
- 1.451 Inches Minimum And 1.498 Inches Maximum
- Grip Diameter [AAUR]
- 0.3115 Inches Minimum And 0.3120 Inches Maximum
- Grip Length [ANEE]
- 0.990 Inches Minimum And 1.010 Inches Maximum
- Head Height [AASU]
- 0.177 Inches Minimum And 0.197 Inches Maximum
- Head Style [AASK]
- Double Hexagon
- Material [MATT]
- Steel Corrosion Resisting Overall
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Shank Unthreaded Hole Diameter [AAWB]
- 0.076 Inches Minimum First Hole And 0.081 Inches Maximum First Hole
- Width Between Flats [AATB]
- 0.492 Inches Minimum And 0.502 Inches Maximum
- Specification/Standard Data [ZZZK]
- 08524-B-17019 Manufacturers Standard
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.441 Inches Minimum And 0.508 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 24
- Thread Series Designator [THSD]
- Unjf
Weapon Systems (WSDC) 5306-00-321-9307
DLA Procurement Analysis 5306-00-321-9307
- Last Stock Position:
- 295 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5306-00-321-9307
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5306-00-321-9307
Freight Information 5306-00-321-9307
5306-00-321-9307 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5306-00-321-9307 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5306-00-321-9307 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5306-00-321-9307 is not classified as a special type of cargo when transported by water. 5306-00-321-9307 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5306-00-321-9307
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5306-00-321-9307 1 Records
Contracting Technical Data File (CTDF) 5306-00-321-9307 February 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: