5306-99-123-8408
Machine Bolt
5306991238408 991238408 6313720 LV7BD6313720 61BE40426
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. View more Machine Bolt
Managed by United Kingdom
NSN Created on 25 Apr 1991
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5306-99-123-8408
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5306-99-123-8408 5+ Documents (More...)
8465-01-631-3720 8465016313720 016313720 is a bag which is attached to a belt (1), individual equipment, and which accommodates individual items such as canteen and the like.
5895-99-631-3720 5895996313720 996313720 is a single component with the dual function of an amplifier, and of combining two or more signals into a composite output signal.
1560-00-631-3720 1560006313720 006313720
25 Apr 1991 2530-99-833-2038 Steering Tie Rod 91060099RNCC: 5 | RNVC: 2 | DAC: 2 25 Apr 1991 5306-99-123-8408
5310-99-439-6950 5310994396950 994396950 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Restrictions 5306-99-123-8408
Approved Sources 5306-99-123-8408
- Part Number
- Manufacturer
- Status
- 6313720
- Manufacturer
- U0724 - Vauxhall Aftersales (Active)
- Primary Buy
- Primary Buy
- LV7BD6313720
- U1269 - Ministry Of Defence - Defence (Active)
- NATO Reference
- NATO Reference
- 61BE40426
- U1725 - Ministry Of Defence (Air) (Domestic (Active)
- NATO Reference
- NATO Reference
NATO Stock Numbers Related to 5306-99-123-8408
5306-12-372-7841 5306-22-624-7596 5306-22-618-3006 5306-66-100-0278 5306-99-143-0962 5306-98-204-3644 5306-99-612-9017 5306-17-101-7704 5306-99-143-9132 5306-99-216-1683 5306-99-139-8970 5306-99-613-0094 5306-99-536-3340 5306-99-657-8501 5306-98-207-6378 5306-99-479-6094 5306-21-896-2543 5306-99-123-3723