What is Federal Supply Class 5306?

FSC 5306 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5306) in the USA for supply items codified in the category of Bolts.

What is NATO Supply Classification Class 5306?

NSC 5306 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5306 in the USA) for supply items codified in the category of Bolts.

Which Federal Supply Group is FSC 5306 in?

FSC 5306 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5306 in?

NSC 5306is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Machine Bolt?

A Machine Bolt (BOLT,MACHINE) is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

What is a Welding Bolt?

A Welding Bolt (BOLT,WELDING) is an externally threaded fastener whose threaded portion is of one nominal diameter having small raised projections on the top side or underside of the head to facilitate welding the head. May or may not be designed to be held or turned with a wrench or inserted driver.

An Eye Bolt (BOLT,EYE) is an externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also BOLT, HOOK. Excludes CONNECTOR, ROD END.

What is a Shoulder Bolt?

A Shoulder Bolt (BOLT,SHOULDER) is an externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.

A Hook Bolt (BOLT,HOOK) is an externally threaded device whose threaded portion is of nominal diameter, without a head but with the unthreaded end bent not over 225 degrees (3.925 radians). See also BOLT, EYE and BOLT, U.

An U Bolt (BOLT,U) is an externally threaded fastener bent approximately 180 degrees (3.141 radians) in the shape of the letter U and with both ends threaded.

What is an Internal Wrenching Bolt?

An Internal Wrenching Bolt (BOLT,INTERNAL WRENCHING) is an externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It is designed with an internal socket or internal multiple spline for use with an internal driver. The head is beveled (conical) or cylindrical in shape. Items with cylindrical shaped heads must have an externally relieved body. A locking feature may be incorporated in the design of the head or threads. See also SCREW, CAP, SOCKET HEAD. Excludes SETSCREW; SCREW, SHOULDER; BOLT, SHOULDER; SCREW, EXTERNALLY RELIEVED BODY; BOLT, EXTERNALLY RELIEVED BODY; and SCREW, MACHINE.

What is a Tee Head Bolt?

A Tee Head Bolt (BOLT,TEE HEAD) is an externally threaded fastener whose threaded portion is of one nominal diameter and with a head specially designed to fit in a slot and hold against turning.

What is an Externally Relieved Body Bolt?

An Externally Relieved Body Bolt (BOLT,EXTERNALLY RELIEVED BODY) is an externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY.

What is an Internally Relieved Body Bolt?

An Internally Relieved Body Bolt (BOLT,INTERNALLY RELIEVED BODY) is an externally threaded fastener whose external threaded portion is of one nominal diameter. It has a concentric hole along the longitudinal centerline which may extend a part or the full length of the bolt. The concentric hole along the centerline may be counterbored and/or internally threaded at the head end or the bolt end. The head is designed to be held or driven by an external and/or internal driver. For items having a hole(s) perpendicular to the axis which meet the concentric hole along the longitudinal centerline, see BOLT, FLUID PASSAGE.

What is a Shear Bolt?

A Shear Bolt (BOLT,SHEAR) is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

What is a Square Neck Bolt?

A Square Neck Bolt (BOLT,SQUARE NECK) is a headed externally threaded fastener whose threaded portion is of one nominal diameter, with a square neck directly beneath the head.

What is a Threaded End Rod?

A Threaded End Rod (ROD,THREADED END) is a headless cylindrical shaped metal item exceeding 12 inches (304.8 mm) in length and externally threaded on one or both ends. The unthreaded portion shall be of one diameter. Excludes items with tapered threads. See also STUD (as modified) and PIN, STRAIGHT, THREADED.

What is a Continuous Thread Rod?

A Continuous Thread Rod (ROD,CONTINUOUS THREAD) is a headless fastener exceeding 12 inches (304.8 mm) in length having an external thread of one nominal diameter running from end to end. See also STUD, CONTINUOUS THREAD.

What is a Drive Shank Bolt?

A Drive Shank Bolt (BOLT,DRIVE SHANK) is an externally threaded fastener, made of high strength metal, whose threaded portion is of one nominal diameter. The unthreaded portion is of a specific grip length, and is ground to a close tolerance in order to provide a drive fit in a specific size hole. It may be plated or unplated. The head is not designed to be driven by a screwdriver or wrench. The item is driven into the parts to be fastened by means of a mallet or similar item.

What is a Close Tolerance Bolt?

A Close Tolerance Bolt (BOLT,CLOSE TOLERANCE) is an externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.

Bolts - Netherlands (NL)

Federal Supply Class (FSC): 5306

NATO Supply Classification Class (NSC): 5306

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Netherlands (NL) - NCB is 17

Page 5 of 5

NSN Format for Bolts
Codified by Netherlands

53	06	17	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

Bolts are a type of mechanical fastener designed with external threads. Bolts are used with a nut to join parts together using tightening torque. The torque creates surface pressure between the bolt thread and its mating nut thread. This surface pressure increases the friction between the two threads and this increasing friction makes it increasingly more difficult for the nut to move and release the torque separating the parts again. These fasteners are intended to be inserted through holes that are pre-drilled in the material being joined. Unlike screws, which are also externally threaded fasteners, nuts and bolts work together, meaning that bolts require a nut to be threaded on to it to function properly and require a drilled hole into which the bolt may be inserted.

The terms “bolting” or “types of bolting” are rarely used in connection with bolts in the context of fasteners, these terms being associated more with fabric bolting and bolting machines used in the fabric industry.

FSC 5306 Bolts - Netherlands (NL)

Frequently Asked Questions(FAQ) for Federal Supply Class 5306

What is Federal Supply Class 5306?: FSC 5306 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5306) in the USA for supply items codified in the category of Bolts.
What is NATO Supply Classification Class 5306?: NSC 5306 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5306 in the USA) for supply items codified in the category of Bolts.
Which Federal Supply Group is FSC 5306 in?: FSC 5306 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5306 in?: NSC 5306 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5306

What is a Machine Bolt? 836 Items: A Machine Bolt (BOLT,MACHINE) is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
What is a Welding Bolt? 16 Items: A Welding Bolt (BOLT,WELDING) is an externally threaded fastener whose threaded portion is of one nominal diameter having small raised projections on the top side or underside of the head to facilitate welding the head. May or may not be designed to be held or turned with a wrench or inserted driver.
What is an Eye Bolt? 165 Items: An Eye Bolt (BOLT,EYE) is an externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also BOLT, HOOK. Excludes CONNECTOR, ROD END.
What is a Shoulder Bolt? 170 Items: A Shoulder Bolt (BOLT,SHOULDER) is an externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.
What is a Hook Bolt? 21 Items: A Hook Bolt (BOLT,HOOK) is an externally threaded device whose threaded portion is of nominal diameter, without a head but with the unthreaded end bent not over 225 degrees (3.925 radians). See also BOLT, EYE and BOLT, U.
What is an U Bolt? 48 Items: An U Bolt (BOLT,U) is an externally threaded fastener bent approximately 180 degrees (3.141 radians) in the shape of the letter U and with both ends threaded.
What is an Internal Wrenching Bolt? 68 Items: An Internal Wrenching Bolt (BOLT,INTERNAL WRENCHING) is an externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It is designed with an internal socket or internal multiple spline for use with an internal driver. The head is beveled (conical) or cylindrical in shape. Items with cylindrical shaped heads must have an externally relieved body. A locking feature may be incorporated in the design of the head or threads. See also SCREW, CAP, SOCKET HEAD. Excludes SETSCREW; SCREW, SHOULDER; BOLT, SHOULDER; SCREW, EXTERNALLY RELIEVED BODY; BOLT, EXTERNALLY RELIEVED BODY; and SCREW, MACHINE.
What is a Tee Head Bolt? 25 Items: A Tee Head Bolt (BOLT,TEE HEAD) is an externally threaded fastener whose threaded portion is of one nominal diameter and with a head specially designed to fit in a slot and hold against turning.
What is an Externally Relieved Body Bolt? 67 Items: An Externally Relieved Body Bolt (BOLT,EXTERNALLY RELIEVED BODY) is an externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY.
What is an Internally Relieved Body Bolt? 37 Items: An Internally Relieved Body Bolt (BOLT,INTERNALLY RELIEVED BODY) is an externally threaded fastener whose external threaded portion is of one nominal diameter. It has a concentric hole along the longitudinal centerline which may extend a part or the full length of the bolt. The concentric hole along the centerline may be counterbored and/or internally threaded at the head end or the bolt end. The head is designed to be held or driven by an external and/or internal driver. For items having a hole(s) perpendicular to the axis which meet the concentric hole along the longitudinal centerline, see BOLT, FLUID PASSAGE.
What is a Shear Bolt? 11 Items: A Shear Bolt (BOLT,SHEAR) is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
What is a Square Neck Bolt? 105 Items: A Square Neck Bolt (BOLT,SQUARE NECK) is a headed externally threaded fastener whose threaded portion is of one nominal diameter, with a square neck directly beneath the head.
What is a Threaded End Rod? 44 Items: A Threaded End Rod (ROD,THREADED END) is a headless cylindrical shaped metal item exceeding 12 inches (304.8 mm) in length and externally threaded on one or both ends. The unthreaded portion shall be of one diameter. Excludes items with tapered threads. See also STUD (as modified) and PIN, STRAIGHT, THREADED.
What is a Continuous Thread Rod? 65 Items: A Continuous Thread Rod (ROD,CONTINUOUS THREAD) is a headless fastener exceeding 12 inches (304.8 mm) in length having an external thread of one nominal diameter running from end to end. See also STUD, CONTINUOUS THREAD.
What is a Drive Shank Bolt? 10 Items: A Drive Shank Bolt (BOLT,DRIVE SHANK) is an externally threaded fastener, made of high strength metal, whose threaded portion is of one nominal diameter. The unthreaded portion is of a specific grip length, and is ground to a close tolerance in order to provide a drive fit in a specific size hole. It may be plated or unplated. The head is not designed to be driven by a screwdriver or wrench. The item is driven into the parts to be fastened by means of a mallet or similar item.
What is a Close Tolerance Bolt? 186 Items: A Close Tolerance Bolt (BOLT,CLOSE TOLERANCE) is an externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.

Stock Items From Supply Class 5306 Page 5 of 5

5306-17-124-0152
Eye Bolt

171240152
SAH-1024/1: RNCC: 3 | RNVC: 2

26 Oct 2011

5306-17-015-5956
Machine Bolt

170155956
NEN5568-1-4-28UNFX4-8GMR: RNCC: 2 | RNVC: 2

10 Aug 1967

5306-17-052-9507
Rework Bolt

170529507
04-14-50-57: RNCC: 3 | RNVC: 2

15 Nov 1982

5306-17-044-1682
Machine Bolt

170441682
M4X35CVSTNEN1555: RNCC: 2 | RNVC: 2
252203261151: RNCC: 3 | RNVC: 2
4X35NE99RVST: RNCC: 3 | RNVC: 2
DIN931: RNCC: 4 | RNVC: 1
NEN1555: RNCC: 4 | RNVC: 1

25 Nov 1974

5306-17-117-4275
Continuous Thread Rod

171174275
DIN975-7/16"UNFX1000-5.8: RNCC: 3 | RNVC: 2

9 Feb 2005

5306-17-114-3472
Machine Bolt

171143472
112.55.07.366: RNCC: 3 | RNVC: 2

3 Oct 2001

5306-17-113-1409
Stang

171131409
T15018: RNCC: 3 | RNVC: 2

28 Feb 2000

5306-17-115-7225
Machine Bolt

171157225
S322F1661200: RNCC: 3 | RNVC: 2

28 May 2003

5306-17-028-0192
Machine Bolt

170280192
DIN931M10X45-8GVCAA: RNCC: 2 | RNVC: 2
DIN931: RNCC: 4 | RNVC: 1

29 Jun 1971

5306-17-055-0934
Shoulder Bolt

170550934
0675390: RNCC: 3 | RNVC: 2
675390: RNCC: 5 | RNVC: 9

15 Mar 1984

5306-17-049-1475
Machine Bolt

170491475
122805: RNCC: 3 | RNVC: 2

4 Feb 1977

5306-17-049-9148
Toggle Bolt

170499148
03-4-7016BL51POS78: RNCC: 3 | RNVC: 2

28 Apr 1978

5306-17-104-7011
Hook Bolt

171047011
0392734: RNCC: 3 | RNVC: 2

10 Oct 1990

5306-17-045-7794
Shoulder Bolt

170457794
A406122-71538: RNCC: 3 | RNVC: 2

8 Nov 1979

5306-17-054-2384
Shoulder Bolt

170542384
0670853: RNCC: 3 | RNVC: 2
670853: RNCC: 5 | RNVC: 9

23 Mar 1983

5306-17-123-1660
Machine Bolt

171231660
MX0219: RNCC: 3 | RNVC: 2

8 Jul 2010

5306-17-113-5222
Machine Bolt

171135222
352250054731: RNCC: 3 | RNVC: 2

8 Aug 2000

5306-17-117-9434
Shoulder Bolt

171179434
S322F2301201: RNCC: 3 | RNVC: 2

22 Sep 2005

5306-17-113-5462
Threaded End Rod

171135462
TREKSTANG: RNCC: 3 | RNVC: 2

6 Sep 2000

5306-17-117-1118
Machine Bolt

171171118
LET00100: RNCC: 3 | RNVC: 2

26 Nov 2004

5306-17-015-8914
Machine Bolt

170158914
NEN5568-3-8-16UNCX3-4-8G: RNCC: 2 | RNVC: 2

11 Jun 1967

5306-17-610-3141
Bolt

176103141
NO PRIMARY REF 17-610-3141: RNCC: 3 | RNVC: 2
BSA1-40E: RNCC: 5 | RNVC: 9

21 Aug 1968

5306-17-049-0906
Internally Relieved Body Bolt

170490906
C1522LEG5: RNCC: 3 | RNVC: 2

18 Jan 1977

5306-17-044-1679
Internal Wrenching Bolt

170441679
4VRI87C52-00: RNCC: 3 | RNVC: 2
VRI87C52-00: RNCC: 3 | RNVC: 2

25 Nov 1974

5306-17-049-5599
Square Neck Bolt

170495599
NEN303M6X60AMAGN: RNCC: 3 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1
M6X60AMAGNNEN303: RNCC: 5 | RNVC: 2

26 Sep 1977

5306-17-044-0537
Machine Bolt

170440537
M10X25X5CRNI18-9NEN102: RNCC: 2 | RNVC: 2
NEN102: RNCC: 4 | RNVC: 1

27 May 1974

5306-17-109-4644
Vleugelmontag Bout

171094644
110.30.07.008: RNCC: 3 | RNVC: 2
110.30.07.004: RNCC: 5 | RNVC: 9

7 Nov 1995

5306-17-103-3667
Eye Bolt

171033667
XX004-8598: RNCC: 3 | RNVC: 2

11 Jul 1989

5306-17-122-3079
Continuous Thread Rod

171223079
DIN976-1-M6X1000-A-CUZN: RNCC: 3 | RNVC: 2

7 Jul 2009

5306-17-015-5985
Machine Bolt

170155985
NEN5568-7-16-14UNCX1-1-4-8G: RNCC: 2 | RNVC: 2

10 Jul 1967

5306-17-705-4067
Machine Bolt

177054067
DIN933M12X30KMS: RNCC: 2 | RNVC: 1
DIN933: RNCC: 4 | RNVC: 1

29 Oct 1962

5306-17-002-0271
Machine Bolt

170020271
N2-71BUF0-80-8X30: RNCC: 3 | RNVC: 1

10 Jul 1972

5306-17-015-5443
Machine Bolt

170155443
ISO4017-M8X40-CUZN-E2A: RNCC: 2 | RNVC: 2

11 Dec 1963

5306-17-046-2411
Machine Bolt

170462411
352250016262: RNCC: 3 | RNVC: 2

10 Mar 1975

5306-17-027-2222
Machine Bolt

170272222
1150-10-19-665-09-0: RNCC: 3 | RNVC: 2
A10-19-665-09-0: RNCC: 3 | RNVC: 2
A1019-665-09-0: RNCC: 3 | RNVC: 2
A1019665090: RNCC: 3 | RNVC: 2
A10-19-665-09-0: RNCC: 6 | RNVC: 9
A10-19-665-09-0: RNCC: 6 | RNVC: 9

25 Jul 1974

5306-17-121-9839
Machine Bolt

171219839
1316/3712Z: RNCC: 3 | RNVC: 2

10 Mar 2009

5306-17-004-7011
Square Neck Bolt

170047011
M10X150-4D-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

8 Jun 1964

5306-17-003-0952
Square Neck Bolt

170030952
M8X150-4D-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

11 Sep 1963

5306-17-052-6900
Machine Bolt

170526900
0638887: RNCC: 3 | RNVC: 2
638887: RNCC: 5 | RNVC: 9

30 Jun 1982

5306-17-053-2956
Externally Relieved Body Bolt

170532956
352231509120: RNCC: 3 | RNVC: 2
352231509121A: RNCC: 5 | RNVC: 2

17 Sep 1982

5306-17-111-3919
Machine Bolt

171113919
011310625: RNCC: 3 | RNVC: 2

30 Dec 1997

5306-17-124-0775
Machine Bolt

171240775
5310000069-00: RNCC: 3 | RNVC: 2
2 0176-647: RNCC: 5 | RNVC: 2

24 Nov 2011

5306-17-102-7814
Machine Bolt

171027814
252203230282: RNCC: 3 | RNVC: 2
2522 032 30282: RNCC: 5 | RNVC: 2
UN-B 058-A4/M8X35: RNCC: 5 | RNVC: 2

10 Jan 1989

5306-17-003-0090
Machine Bolt

170030090
BUF0-80-10X19: RNCC: 3 | RNVC: 2
N2-71BUF0-80-10X19: RNCC: 3 | RNVC: 2
N2-71BUF0-80-10X19: RNCC: 5 | RNVC: 9

4 Aug 1974

5306-17-106-3216
Machine Bolt

171063216
04-06-20-29/101: RNCC: 3 | RNVC: 2

1 Apr 1992

5306-17-045-7980
Close Tolerance Bolt

170457980
01871-62103BLAD1LEG1: RNCC: 3 | RNVC: 2

8 Nov 1979

5306-17-015-5439
Machine Bolt

170155439
NEN5568-3-8-24UNFX2-1-2-8GMR: RNCC: 2 | RNVC: 2

15 Jun 1964

5306-17-054-8057
Internal Wrenching Bolt

170548057
0632728: RNCC: 3 | RNVC: 2
632728: RNCC: 5 | RNVC: 9

23 Nov 1983

5306-17-054-4250
Assembled Washer Bolt

170544250
0672943: RNCC: 3 | RNVC: 2
672943: RNCC: 5 | RNVC: 9

7 Jun 1983

5306-17-710-4546
Machine Bolt

177104546
B18-2-1960BLAD10-1-2UNCX2-3-4VZI: RNCC: 2 | RNVC: 2

11 Mar 1968

5306-17-051-6935
Externally Relieved Body Bolt

170516935
A420331-7193154: RNCC: 3 | RNVC: 2

26 Jan 1981

5306-17-051-2303
Eye Bolt

170512303
NO PRIMARY REF 17-051-2303: RNCC: 3 | RNVC: 2
B17002BL3M30X3-5VLSTL1 3-4IN: RNCC: 5 | RNVC: 9

11 Mar 1980

5306-17-115-7409
Close Tolerance Bolt

171157409
EN2549-060006: RNCC: 2 | RNVC: 2

3 Jun 2003

5306-17-115-3381
Close Tolerance Bolt

171153381
EN3052D050018: RNCC: 2 | RNVC: 2
EN3052D050018: RNCC: 5 | RNVC: 2

19 Dec 2002

5306-17-026-1146
Machine Bolt

170261146
M6X30M-8-8-NEN1568NEN22082FECD5C: RNCC: 2 | RNVC: 2
M6X30MDIN933-8-8GALCD: RNCC: 2 | RNVC: 2
M6X30SVTG4469: RNCC: 3 | RNVC: 2
NEN1568: RNCC: 4 | RNVC: 1
DIN933: RNCC: 4 | RNVC: 1

17 Jun 1972

5306-17-032-2894
Machine Bolt

170322894
NEN5568-5-8-11UNCX1-3-4INM0NEL: RNCC: 2 | RNVC: 2

21 Aug 1968

5306-17-043-2028
Machine Bolt

170432028
NEN5568-5-8-11UNCX2-1-4IN8-8: RNCC: 2 | RNVC: 2

7 Jan 1974

5306-17-109-1903
Machine Bolt

171091903
A209793/7087935-15: RNCC: 3 | RNVC: 2
A209793/7087935-15: RNCC: 5 | RNVC: 9

5 Sep 1995

5306-17-004-6404
Machine Bolt

170046404
NO PRIMARY REF 17-004-6404: RNCC: 3 | RNVC: 2
B18-2-1955BLAD11 1-2NCX7ALNUT: RNCC: 6 | RNVC: 9
B18-2-1955BLAD11-1-2NCX7ALNUT: RNCC: 6 | RNVC: 9

25 Sep 1963

5306-17-006-0035
Machine Bolt

170060035
DIN558-WW5/16X20-ST: RNCC: 2 | RNVC: 2

21 Aug 1968

5306-17-032-1067
Machine Bolt

170321067
DIN960M10X1X50S8-8VCAD: RNCC: 2 | RNVC: 1
M10X1X50SDIN960-8-8VCAD: RNCC: 2 | RNVC: 1
DIN960: RNCC: 4 | RNVC: 1

17 Jun 1972

5306-17-038-1872
Close Tolerance Bolt

170381872
NO PRIMARY REF 17-038-1872: RNCC: 3 | RNVC: 2
N1115LEG20: RNCC: 5 | RNVC: 9

1 Jul 1971

5306-17-702-1703
Machine Bolt

177021703
NO PRIMARY REF 17-702-1703: RNCC: 3 | RNVC: 2
B18-2-1955BLAD11: RNCC: 6 | RNVC: 9

2 Feb 1962

5306-17-112-0553
Continuous Thread Rod

171120553
20290.127.001: RNCC: 3 | RNVC: 2
20290-1/2IN-UNF-ST: RNCC: 5 | RNVC: 2
DIN975-1/2IN-UNF: RNCC: 6 | RNVC: 9

18 Aug 1998

5306-17-004-6443
Square Neck Bolt

170046443
M8X25-4D-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

24 Oct 1963

5306-17-119-0835
Close Tolerance Bolt

171190835
MS27576-12C48NSCM80205: RNCC: 3 | RNVC: 2
MS27576-12C48: RNCC: 5 | RNVC: 2

7 Nov 2006

5306-17-050-0736
Shoulder Bolt

170500736
0527: RNCC: 3 | RNVC: 1
0323SREP20: RNCC: 3 | RNVC: 2

18 Aug 1977

5306-17-042-3842
Machine Bolt

170423842
DIN931M12X60CVST: RNCC: 2 | RNVC: 2
DIN931: RNCC: 4 | RNVC: 1
0A00352DLEG47: RNCC: 5 | RNVC: 9
B141-12X60: RNCC: 5 | RNVC: 9

11 Mar 1973

5306-17-112-3157
Machine Bout

5306-17-036-6048
Square Neck Bolt

170366048
DIN603M6X25-4DVZIN: RNCC: 2 | RNVC: 2
1035-86-04-22: RNCC: 3 | RNVC: 2

28 Oct 1970

5306-17-056-6400
Bolt

170566400
FON2-1630-05-17: RNCC: 3 | RNVC: 2

21 Nov 1995

5306-17-004-6996
Eye Bolt

170046996
M70268ALEGY: RNCC: 3 | RNVC: 2
368010-2LEG4: RNCC: 3 | RNVC: 2

24 Aug 1973

5306-17-103-8413
Internal Wrenching Bolt

171038413
A422650/7280108: RNCC: 3 | RNVC: 2

15 Dec 1989

5306-17-113-6858
Machine Bolt

171136858
262602506ZT129: RNCC: 3 | RNVC: 2

6 Dec 2000

5306-17-123-3264
Machine Bolt

171233264
S322F1403200: RNCC: 3 | RNVC: 2

30 Sep 2010

5306-17-003-3340
Machine Bolt

170033340
ISO4017-M8X16-CUZN-E2A: RNCC: 2 | RNVC: 2

29 Oct 1974

5306-17-003-6360
Machine Bolt

170036360
H8X20NFE27111STVCAD: RNCC: 2 | RNVC: 2
DIN933: RNCC: 4 | RNVC: 1
169-0268: RNCC: 6 | RNVC: 9
E902-3-73: RNCC: 6 | RNVC: 9
M8X20DIN933-8-8: RNCC: 6 | RNVC: 9
M8X20DIN933-8.8: RNCC: 6 | RNVC: 9

17 Jun 1972

5306-17-049-5392
Machine Bolt

170495392
44-2-002LEG5: RNCC: 3 | RNVC: 2

13 Sep 1977

5306-17-124-5655
Continuous Thread Rod

171245655
20360140150: RNCC: 3 | RNVC: 2
20360 M14X1,50: RNCC: 5 | RNVC: 2
8715492607713: RNCC: 5 | RNVC: 2

31 Oct 2012

5306-17-056-6379
Bolt

170566379
FON2-1614V04-16: RNCC: 3 | RNVC: 2

21 Nov 1995

5306-17-702-1706
Machine Bolt

177021706
NO PRIMARY REF 17-702-1706: RNCC: 3 | RNVC: 2
B18-2-1955BLAD11: RNCC: 6 | RNVC: 9

2 Feb 1962

5306-17-120-3111
Eye Bolt

171203111
DIN444B-M16X100-A2-70: RNCC: 3 | RNVC: 2

29 Mar 2007

5306-17-056-4976
Goujon Pour Limiteu

170564976
NO PRIMARY REF 17-056-4976: RNCC: 3 | RNVC: 2
001-804000-1014: RNCC: 5 | RNVC: 9

30 Mar 1994

5306-17-037-7577
Machine Bolt

170377577
DIN933M10X65-8-8VZIN: RNCC: 2 | RNVC: 2
M10X65DIN933-8-8VZIN: RNCC: 2 | RNVC: 2
1035-38-05-77: RNCC: 3 | RNVC: 2
DIN933: RNCC: 4 | RNVC: 1

6 May 1971

5306-17-003-0963
Square Neck Bolt

170030963
M10X40-4D-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

11 Sep 1963

5306-17-052-3247
Close Tolerance Bolt

170523247
4-68216-77: RNCC: 3 | RNVC: 2

28 Dec 1981

5306-17-103-8771
Oog Bout

5306-17-003-0922
Square Neck Bolt

170030922
M6X45-4D-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

17 Jun 1972

5306-17-015-2599
Machine Bolt

170152599
SMS1414B6LS5X12D80: RNCC: 2 | RNVC: 1
BUF080-5X12: RNCC: 3 | RNVC: 1
N2-71B6LS5X12D80: RNCC: 3 | RNVC: 1
SMS1414: RNCC: 4 | RNVC: 1

21 Aug 1968

5306-17-631-6961
Internal Wrenching Bolt

176316961
NO PRIMARY REF 17-631-6961: RNCC: 3 | RNVC: 2
DIN7991: RNCC: 4 | RNVC: 1
B2304BBLAD1LEG50: RNCC: 5 | RNVC: 9
B2503BBLAD1LEG50: RNCC: 5 | RNVC: 9
07991-006-35-009: RNCC: 6 | RNVC: 9

16 Jun 1972

5306-17-032-1266
Machine Bolt

170321266
6280-37 3-4X220: RNCC: 3 | RNVC: 2
6280-37 3-4X220: RNCC: 5 | RNVC: 9

21 Aug 1968

5306-17-039-6479
Close Tolerance Bolt

170396479
8544-0K10: RNCC: 3 | RNVC: 2
8544-0: RNCC: 6 | RNVC: 9

12 Aug 1972

5306-17-027-0859
Shoulder Bolt

170270859
A10-19-601-05-0: RNCC: 3 | RNVC: 2
A1019-601-05-0: RNCC: 3 | RNVC: 2
A1019601050: RNCC: 3 | RNVC: 2
1150-10-19-601-05-0: RNCC: 3 | RNVC: 2
A10-19-601-05-0: RNCC: 6 | RNVC: 9
A10-19-601-05-0: RNCC: 6 | RNVC: 9

11 Jul 1974

5306-17-122-3078
Continuous Thread Rod

171223078
DIN976-1-M5X1000-A-CUZN: RNCC: 3 | RNVC: 2

7 Jul 2009

5306-17-120-2873
Continuous Thread Rod

171202873
DIN975-M12X1000-LINKS-8.8-VZ: RNCC: 3 | RNVC: 2

23 Mar 2007

5306-17-111-7945
Shear Bolt

171117945
NAS1104-6NSCM80205: RNCC: 3 | RNVC: 2
5306-00-616-6911/K5/01-184-5930: RNCC: 6 | RNVC: 9

20 Apr 1998

5306-17-705-4307
Square Neck Bolt

177054307
2476-90X3-8: RNCC: 3 | RNVC: 2
3476F90X3-8: RNCC: 3 | RNVC: 2

15 Jan 1981

5306-17-003-3375
Machine Bolt

170033375
ISO4017-BSW1/2"X50MM-CUZN: RNCC: 2 | RNVC: 2

15 Feb 1963

5306-17-115-8838
Close Tolerance Bolt

171158838
EN2859-100036: RNCC: 2 | RNVC: 2

22 Jul 2003

5306-17-007-7522
Machine Bolt

170077522
NEN5568 1-4IN28UNFX3-4IN8GVCAD: RNCC: 2 | RNVC: 2
263N620: RNCC: 3 | RNVC: 2
273N619: RNCC: 3 | RNVC: 2
NEN5568: RNCC: 4 | RNVC: 1
ASAB18-2-1: RNCC: 4 | RNVC: 1
B18-2-1955BLAD111-4UNFX3-4: RNCC: 6 | RNVC: 9

12 May 1973

5306-17-116-6139
Eye Bolt

171166139
CROSBY M-279: RNCC: 3 | RNVC: 2

28 Apr 2004

5306-17-049-6947
Threaded End Rod

170496947
0611338: RNCC: 3 | RNVC: 2
611338: RNCC: 5 | RNVC: 9

13 Dec 1977

5306-17-007-8091
Machine Bolt

170078091
262N625: RNCC: 3 | RNVC: 2
ASAB18-2-1: RNCC: 4 | RNVC: 1
NEN5568: RNCC: 4 | RNVC: 1
B18-2-1955BLAD11 1-4UNCX1: RNCC: 6 | RNVC: 9

17 Jun 1972

5306-17-003-3373
Machine Bolt

170033373
ISO4017-BSW3/8"X50MM-CUZN: RNCC: 2 | RNVC: 2

15 Feb 1963

5306-17-013-5685
Bout

170135685
262G4: RNCC: 3 | RNVC: 1
NO PRIMARY REF 17-013-5685: RNCC: 3 | RNVC: 2

24 Dec 1974

5306-17-043-2025
Machine Bolt

170432025
NEN5568-5-8-11UNCX1-1-4IN8-8: RNCC: 2 | RNVC: 2

7 Jan 1974

5306-17-037-4584
Shoulder Bolt

170374584
A1019-501-80-0: RNCC: 3 | RNVC: 2
A1019501800: RNCC: 3 | RNVC: 2
1150-19-501-80-0: RNCC: 3 | RNVC: 2
A10-19-501-80-0: RNCC: 3 | RNVC: 2
A10-19-501-80-0: RNCC: 6 | RNVC: 9
A10-19-501-80-0: RNCC: 6 | RNVC: 9
85-651-4917: RNCC: 6 | RNVC: 9

18 Feb 1971

5306-17-104-1041
V.20Mm. Mitr Pin

171041041
BW6280-135-23: RNCC: 3 | RNVC: 2
BW6280-135-23: RNCC: 5 | RNVC: 9

27 Feb 1990

5306-17-051-2689
Eye Bolt

170512689
05-14-65-17: RNCC: 3 | RNVC: 2

9 Apr 1980

5306-17-109-6355
Welding Bolt

171096355
0840.023BLAD1-5948: RNCC: 3 | RNVC: 2
5948: RNCC: 3 | RNVC: 2

12 Dec 1995

5306-17-107-6828
Square Neck Bolt

171076828
XX005-8486: RNCC: 3 | RNVC: 2

23 Nov 1993

5306-17-015-5967
Machine Bolt

170155967
NEN5568-5-8-18UNFX2-1-2-8GMR: RNCC: 2 | RNVC: 2

10 Jul 1967

5306-17-007-9649
Machine Bolt

170079649
DIN558 5-16X70: RNCC: 2 | RNVC: 2
DIN558-5-16X70: RNCC: 2 | RNVC: 2
DIN558: RNCC: 4 | RNVC: 1

5 Jun 1964

5306-17-103-0064
Close Tolerance Bolt

171030064
X12788-005: RNCC: 3 | RNVC: 2

11 Apr 1989

5306-17-003-0944
Square Neck Bolt

170030944
M8X80-4D-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

11 Sep 1963

5306-17-123-8979
Continuous Thread Rod

171238979
5056-423: RNCC: 3 | RNVC: 2

26 Aug 2011

5306-17-007-4448
Machine Bolt

170074448
1-2INX40NE89ST: RNCC: 3 | RNVC: 2
252207715012: RNCC: 3 | RNVC: 2
DIN931: RNCC: 4 | RNVC: 1
NEN2336: RNCC: 4 | RNVC: 1

15 Oct 1972

5306-17-118-8262
Eye Bolt

171188262
16040.079.001: RNCC: 3 | RNVC: 2
DIN580-WW5/16-18-C15: RNCC: 5 | RNVC: 1
WW 5/16 WLL 75 KG: RNCC: 5 | RNVC: 2

14 Aug 2006

5306-17-024-0802
Machine Bolt

170240802
M4X10DIN933-8-8GALCD: RNCC: 2 | RNVC: 2
M4X10-8-8NEN1568VCAD: RNCC: 2 | RNVC: 2
0324985: RNCC: 3 | RNVC: 1
M4X10SVTG4053: RNCC: 3 | RNVC: 2
DIN933: RNCC: 4 | RNVC: 1
NEN1568: RNCC: 4 | RNVC: 1
324985: RNCC: 5 | RNVC: 9

17 Jun 1972

5306-17-015-5367
Machine Bolt

170155367
NEN5568-1-4-28UNFX1-2INST8-8: RNCC: 2 | RNVC: 2

5 Jul 1973

5306-17-015-5939
Machine Bolt

170155939
BS1768-51UFB104-1DR: RNCC: 2 | RNVC: 2
NEN5568: RNCC: 4 | RNVC: 1
BS1768: RNCC: 4 | RNVC: 1
251A15-02SHT1PC2: RNCC: 6 | RNVC: 9

5 Jul 1973

5306-17-121-8346
Ring Bolt

171218346
A 101/0007: RNCC: 3 | RNVC: 2

5 Jan 2009

5306-17-122-3039
Continuous Thread Rod

171223039
DIN976-1-M20X1000-A-A4-70: RNCC: 3 | RNVC: 2

7 Jul 2009

5306-17-122-8664
Bout

171228664
34432-01600: RNCC: 3 | RNVC: 2

15 Feb 2010

5306-17-121-1086
Machine Bolt

171211086
8101-004-003: RNCC: 3 | RNVC: 2
8101-004-003: RNCC: 5 | RNVC: 2

21 Feb 2008

5306-17-120-2519
Machine Bolt

171202519
ISO4762-M16X70-A2-70: RNCC: 3 | RNVC: 2

20 Mar 2007

5306-17-110-3538
Machine Bolt

171103538
ISO7412-M24X100-A3P: RNCC: 3 | RNVC: 2

31 Jul 1996

5306-17-003-9674
Shoulder Bolt

170039674
0577675: RNCC: 3 | RNVC: 2
577675: RNCC: 5 | RNVC: 9

17 Jun 1972

5306-17-107-4888
Internal Wrenching Bolt

171074888
356-1640: RNCC: 3 | RNVC: 2
356-1640: RNCC: 5 | RNVC: 2

31 Aug 1993

5306-17-051-6939
Eye Bolt

170516939
A421376-8370026: RNCC: 3 | RNVC: 2

26 Jan 1981

5306-17-002-9077
Machine Bolt

170029077
DIN933 5-8X35RVST: RNCC: 2 | RNVC: 2
5-8X35NE99ST: RNCC: 3 | RNVC: 2
NE89 5-8X35ST: RNCC: 3 | RNVC: 2

29 Jun 1971

5306-17-118-4895
Cilinderbout

171184895
ISO7984-M10X25-8.8-A3D: RNCC: 2 | RNVC: 2

10 Apr 2006

5306-17-043-4490
Machine Bolt

170434490
0311058: RNCC: 3 | RNVC: 2
DIN960: RNCC: 4 | RNVC: 1
0311058: RNCC: 5 | RNVC: 2
311058: RNCC: 5 | RNVC: 9

11 Nov 1973

5306-17-706-3564
Eye Bolt

177063564
NO PRIMARY REF 17-706-3564: RNCC: 3 | RNVC: 2
BH2707: RNCC: 5 | RNVC: 9

26 Nov 1970

5306-17-705-4057
Machine Bolt

177054057
NO PRIMARY REF 17-705-4057: RNCC: 3 | RNVC: 2

21 Aug 1968

5306-17-115-0025
Close Tolerance Bolt

171150025
6118.41-13LEG16: RNCC: 3 | RNVC: 2
6118.41-1LEG16: RNCC: 3 | RNVC: 2

26 Jun 2002

5306-17-115-7416
Close Tolerance Bolt

171157416
EN2549-060011: RNCC: 2 | RNVC: 2

3 Jun 2003

5306-17-118-9631
Eye Bolt

171189631
C-BLA: RNCC: 3 | RNVC: 2

26 Sep 2006

5306-17-630-4750
Machine Bolt

176304750
DIN1714-G-ALBZ-9: RNCC: 2 | RNVC: 2

21 Aug 1968

5306-17-003-2984
Machine Bolt

170032984
ISO4014-M10X105-A2-70: RNCC: 2 | RNVC: 2

12 Feb 1963

5306-17-115-7408
Close Tolerance Bolt

171157408
EN2549-060003: RNCC: 2 | RNVC: 2

3 Jun 2003

5306-17-039-5940
Finned Neck Bolt

170395940
A86926-3F8: RNCC: 3 | RNVC: 2

12 Aug 1972

5306-17-003-0935
Square Neck Bolt

170030935
M6X110-4D-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

11 Sep 1963

5306-17-024-6562
Square Neck Bolt

170246562
NO PRIMARY REF 17-024-6562: RNCC: 3 | RNVC: 2
W5-16X120: RNCC: 6 | RNVC: 9

21 Aug 1968

5306-17-056-6328
Bolt

170566328
F8200-205-003: RNCC: 3 | RNVC: 2

21 Nov 1995

5306-17-102-5332
Internal Wrenching Bolt

171025332
DSA8039-028: RNCC: 3 | RNVC: 2
DSA8039-028: RNCC: 3 | RNVC: 2
0696431: RNCC: 5 | RNVC: 2
696431: RNCC: 5 | RNVC: 9

21 Sep 1988

5306-17-003-0964
Square Neck Bolt

170030964
M10X60-4D-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

11 Sep 1963

5306-17-105-9569
Ribbed Shoulder Bolt

171059569
551101: RNCC: 3 | RNVC: 2

30 Oct 1991

5306-17-710-1512
Eye Bolt

177101512
BM12X90-50DIN444-4DVCAD: RNCC: 2 | RNVC: 2

17 Jun 1972

5306-17-009-3265
Machine Bolt

170093265
DIN931M10X100-8G: RNCC: 2 | RNVC: 2
0142383: RNCC: 3 | RNVC: 2
DIN931: RNCC: 4 | RNVC: 1

29 Jun 1971

5306-17-100-5467
U Bolt

171005467
0677937: RNCC: 3 | RNVC: 2
677937: RNCC: 5 | RNVC: 9

3 Mar 1986

5306-17-115-7452
Close Tolerance Bolt

171157452
EN2874-060027: RNCC: 2 | RNVC: 2

3 Jun 2003

5306-17-036-5733
Machine Bolt

170365733
4501-04-55-00: RNCC: 3 | RNVC: 2

19 Aug 1970

5306-17-703-1011
Machine Bolt

177031011
NE82-8X28D: RNCC: 3 | RNVC: 2
NE82D8X28: RNCC: 3 | RNVC: 2
352230006360: RNCC: 3 | RNVC: 2
8X28NE82D: RNCC: 3 | RNVC: 2

9 Jan 1971

5306-17-118-8053
Eye Bolt

171188053
DIN580-M42-A4: RNCC: 3 | RNVC: 2

10 Aug 2006

5306-17-003-0928
Square Neck Bolt

170030928
M6X25-4D-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

6 Feb 1963

5306-17-122-2872
Continuous Thread Rod

171222872
DIN976-1-M12X1000-A-4.6: RNCC: 3 | RNVC: 2

25 Jun 2009

5306-17-120-3522
Bout

171203522
CROSBY S276 - 9,53X63,5MM: RNCC: 3 | RNVC: 2

5 Apr 2007

5306-17-100-8323
Square Neck Bolt

171008323
6001-0658-001: RNCC: 3 | RNVC: 2

1 Jul 1986

5306-17-710-4555
Machine Bolt

177104555
B18-2-1960BLAD10-3-4UNCX2-1-2VZI: RNCC: 2 | RNVC: 2

11 Mar 1968

5306-17-118-4814
Eye Bolt

171184814
CROSBY S-279 UNC 1/2-13 1,18T: RNCC: 3 | RNVC: 2

5 Apr 2006

5306-17-004-5664
Square Neck Bolt

170045664
M12X70-4D-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

25 Sep 1963

5306-17-056-0196
Machine Bolt

170560196
21/244-034: RNCC: 3 | RNVC: 2

23 Jul 1987

5306-17-109-0922
Shoulder Bolt

171090922
1.16.32.32210: RNCC: 3 | RNVC: 2
3V.3232-104POS1: RNCC: 5 | RNVC: 2

25 Jul 1995

5306-17-005-9537
Machine Bolt

170059537
N2-40-38: RNCC: 3 | RNVC: 2

15 Dec 1974

5306-17-015-5365
Machine Bolt

170155365
NEN5568-7-16-20UNFX1-8G: RNCC: 2 | RNVC: 1
NEN5568 7-16IN20UNFX1IN8G: RNCC: 2 | RNVC: 2
NEN5568: RNCC: 4 | RNVC: 1

15 Jun 1964

5306-17-048-4998
Square Neck Bolt

170484998
M10X80XSCRNIM018-10NEN303: RNCC: 2 | RNVC: 2
NEN303M10X80X5CRNI18-10: RNCC: 3 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

2 Jul 1976

5306-17-032-9386
Machine Bolt

170329386
M18X8X25MCVSTNEN1555: RNCC: 2 | RNVC: 2
2522 032 61278: RNCC: 3 | RNVC: 2
NE99RVST-8X25: RNCC: 3 | RNVC: 2
DIN933 M8X25-A1-70: RNCC: 3 | RNVC: 2
DIN933 M8X25RVST: RNCC: 4 | RNVC: 1
DIN933 M8X25-A1-70: RNCC: 5 | RNVC: 9

15 Apr 1968

5306-17-051-8003
Machine Bout

170518003
CT-77-1182ALEG4: RNCC: 3 | RNVC: 2

1 May 1981

5306-17-015-5776
Machine Bolt

170155776
NEN5568 1-2IN20UNFX1 1-4IN8G: RNCC: 2 | RNVC: 2
63126M40P0S8: RNCC: 3 | RNVC: 2
NEN5568: RNCC: 4 | RNVC: 1
40DB7659: RNCC: 6 | RNVC: 9
41DB1152: RNCC: 6 | RNVC: 9
62-02-300-3: RNCC: 6 | RNVC: 9
62-02-305-8: RNCC: 6 | RNVC: 9
62-02-307-22: RNCC: 6 | RNVC: 9

28 Jun 1967

5306-17-120-7823
Bout

171207823
M30*2*90 RVS A4-70: RNCC: 3 | RNVC: 2

3 Oct 2007

5306-17-023-3245
Bolt Blank

170233245
NO PRIMARY REF 17-023-3245: RNCC: 3 | RNVC: 2
79-6135-490-400W: RNCC: 5 | RNVC: 2
79-6135-490-400W: RNCC: 5 | RNVC: 9

17 Jun 1972

5306-17-123-8978
Continuous Thread Rod

171238978
5056-027: RNCC: 3 | RNVC: 2

26 Aug 2011

5306-17-118-1516
Machine Bolt

171181516
2000-089: RNCC: 3 | RNVC: 2

13 Dec 2005

5306-17-118-4962
Zeskant Bout

171184962
ISO4017-M8X45-10.9-A2C: RNCC: 2 | RNVC: 2

10 Apr 2006

5306-17-042-8073
Eye Bolt

170428073
W007123100: RNCC: 3 | RNVC: 2
A406351-71231: RNCC: 5 | RNVC: 2
A406351-7123100: RNCC: 5 | RNVC: 2

8 Apr 1975

5306-17-120-6469
Internal Wrenching Bolt

171206469
ISO7379 M10X12F9X40-A2-70: RNCC: 3 | RNVC: 2

2 Aug 2007

5306-17-116-2661
Machine Bolt

171162661
FON2-1611V03-14: RNCC: 3 | RNVC: 2

3 Dec 2003

5306-17-046-0251
Eye Bolt

170460251
3991-3-163: RNCC: 3 | RNVC: 2

22 Sep 1980

5306-17-123-3259
Close Tolerance Bolt

171233259
EN2549-080006F: RNCC: 2 | RNVC: 2

30 Sep 2010

5306-17-015-5467
Machine Bolt

170155467
NEN5568-1-2-20UNFX2-1-2-8GMR: RNCC: 2 | RNVC: 1
NEN5568 1-2IN20UNFX2 1-2IN8G: RNCC: 2 | RNVC: 2
NEN5568: RNCC: 4 | RNVC: 1

15 Jun 1964

5306-17-017-5119
Machine Bolt

170175119
3-8X30DIN931RVST: RNCC: 2 | RNVC: 1
FB106-18: RNCC: 2 | RNVC: 1
3-8BSFX55DIN931CRNISTU: RNCC: 2 | RNVC: 2
DIN931: RNCC: 4 | RNVC: 1

27 Mar 1963

5306-17-046-0247
Machine Bolt

170460247
DIN933M10X16X5CRNI18-9: RNCC: 2 | RNVC: 2
M10X16DIN933X5CRNI18-9: RNCC: 2 | RNVC: 2
M10X16X5CRNI18-9NEN1568: RNCC: 2 | RNVC: 2
NEN1568M10X16X5CRNI18-9: RNCC: 2 | RNVC: 2

22 Sep 1980

5306-17-017-9424
Machine Bolt

170179424
KN10231BLAD8-4,7CM: RNCC: 2 | RNVC: 2

21 Aug 1968

5306-17-116-1034
Hook Bolt

171161034
629-200-0740: RNCC: 3 | RNVC: 2

18 Jul 2000

5306-17-123-7503
Machine Bolt

171237503
2121 1902-374: RNCC: 3 | RNVC: 2
DIN6921-M6X30-8.8-A2P-DRILOC: RNCC: 5 | RNVC: 2
DIN6921-M6X30H-8.8-A2P-DRILOC: RNCC: 5 | RNVC: 2

25 May 2011

5306-17-015-5472
Machine Bolt

170155472
NEN5568 1-2IN20UNFX4IN8G: RNCC: 2 | RNVC: 2
NEN5568: RNCC: 4 | RNVC: 1

15 Jun 1964

5306-17-025-5573
Machine Bolt

170255573
DIN933 5-16X40-4D: RNCC: 2 | RNVC: 2
DIN933: RNCC: 4 | RNVC: 1

17 Jun 1972

5306-17-022-3554
Machine Bolt

170223554
NEN5568-1-2-13UNCX2-1-2-8GMR: RNCC: 2 | RNVC: 2

16 Mar 1963

5306-17-124-1678
Machine Bolt

171241678
EN1665-M10X20-8.8-A3B: RNCC: 2 | RNVC: 2

20 Jan 2012

5306-17-116-5634
Internally Relieved Body Bolt

171165634
S521F3238201: RNCC: 3 | RNVC: 2

16 Apr 2004

5306-17-115-3377
Close Tolerance Bolt

171153377
EN3052-050014: RNCC: 2 | RNVC: 2
EN3052-050014: RNCC: 5 | RNVC: 2

19 Dec 2002

5306-17-045-7388
Screw

170457388
NO PRIMARY REF 17-045-7388: RNCC: 3 | RNVC: 2
N010-32X1-8: RNCC: 6 | RNVC: 9

15 Jan 1981

5306-17-056-6371
Bolt

170566371
FON2-1614V04-03: RNCC: 3 | RNVC: 2

21 Nov 1995

5306-17-115-7454
Close Tolerance Bolt

171157454
EN2874-080055: RNCC: 2 | RNVC: 2

3 Jun 2003

5306-17-618-0523
Eye Bolt

176180523
NO PRIMARY REF 17-618-0523: RNCC: 3 | RNVC: 2
910-382353: RNCC: 6 | RNVC: 9
910-382353 3-8UNF: RNCC: 6 | RNVC: 9

21 Aug 1968

5306-17-106-7305
Eye Bolt

171067305
903-9-5.01BLAD10 LANG: RNCC: 3 | RNVC: 2

28 Oct 1992

5306-17-118-4065
Eye Bolt

171184065
CROSBY M-279 M-36 WBL 8,5T: RNCC: 3 | RNVC: 2

15 Mar 2006

5306-17-055-3482
Drive Shank Bolt

170553482
21509/5: RNCC: 3 | RNVC: 2
EM6-11-9P12: RNCC: 3 | RNVC: 2

18 Jul 1984

5306-17-004-6740
Square Neck Bolt

170046740
ISO8677/4034-M10X100-A2-70: RNCC: 2 | RNVC: 2

30 Nov 1963

5306-17-027-0982
Shoulder Bolt

170270982
NO PRIMARY REF 17-027-0982: RNCC: 3 | RNVC: 2
A10-14-166-08-0: RNCC: 5 | RNVC: 2
A1014-166-08-0: RNCC: 5 | RNVC: 9
A1014166080: RNCC: 5 | RNVC: 9
1150-10-14-166-08-0: RNCC: 5 | RNVC: 9
A10-14-166-08-0: RNCC: 5 | RNVC: 9
A10-14-166-08-0: RNCC: 6 | RNVC: 9
A10-14-166-08-0: RNCC: 6 | RNVC: 9

25 Jul 1974

5306-17-122-1911
Shoulder Bolt

171221911
DIN933-M8X120-RVS-A2-70: RNCC: 3 | RNVC: 2

26 May 2009

5306-17-705-4430
Square Neck Bolt

177054430
M10X200X12CRNI18-8-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

19 Dec 1965

5306-17-101-9930
Machine Bolt

171019930
TBD34-010ITEM70NCSMK0312: RNCC: 3 | RNVC: 2
TBD34-010LEG70: RNCC: 3 | RNVC: 2
TBD34-010ITEM70NCSMK0312: RNCC: 5 | RNVC: 9

16 Feb 1988

5306-17-121-0425
Machine Bolt

171210425
2121 1902-451: RNCC: 3 | RNVC: 2

29 Jan 2008

5306-17-123-7069
Continuous Thread Rod

171237069
46290063001: RNCC: 3 | RNVC: 2
8715492842541: RNCC: 5 | RNVC: 2

29 Apr 2011

5306-17-106-0501
Draadspindel

171060501
68116-1424-B00: RNCC: 3 | RNVC: 2

3 Dec 1991

5306-17-112-5151
Machine Bolt

171125151
FON2-1611V03-20: RNCC: 3 | RNVC: 2

22 Mar 1999

5306-17-124-0666
Machine Bolt

171240666
2121 2111-493: RNCC: 3 | RNVC: 2
DIN6921-M10X25-8.8-A3J: RNCC: 5 | RNVC: 9

17 Nov 2011

5306-17-046-8383
Machine Bolt

170468383
WTB99-645: RNCC: 3 | RNVC: 2
WTB99-645: RNCC: 5 | RNVC: 9

25 Feb 1982

5306-17-015-5463
Machine Bolt

170155463
NEN5568-1-2-20UNFX1-1-2-8G: RNCC: 2 | RNVC: 2

15 Jun 1964

5306-17-124-2764
Machine Bolt

171242764
2121 2111-379: RNCC: 3 | RNVC: 2
DIN6921-M6X45-8.8-A2J: RNCC: 5 | RNVC: 9

27 Mar 2012

5306-17-003-0950
Square Neck Bolt

170030950
M8X65-4D-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

11 Sep 1963

5306-17-702-1704
Machine Bolt

177021704
NO PRIMARY REF 17-702-1704: RNCC: 3 | RNVC: 2
ASAB18BLAD11 1-4NCX3-4INAL: RNCC: 6 | RNVC: 9
B18-2-1955BLAD11: RNCC: 6 | RNVC: 9

23 Jan 1962

5306-17-036-0099
Shoulder Bolt

170360099
NO PRIMARY REF 17-036-0099: RNCC: 3 | RNVC: 2
Z3221BLAD3DLEG1M30X182ST5-6: RNCC: 5 | RNVC: 9
Z3221BLAD3LEG1M30X182-5D: RNCC: 5 | RNVC: 9

20 May 1970

5306-17-110-8784
Machine Bolt

171108784
010109235: RNCC: 3 | RNVC: 2

13 May 1997

5306-17-109-6356
Welding Bolt

171096356
0840.023BLAD1-5951: RNCC: 3 | RNVC: 2
5951: RNCC: 3 | RNVC: 2

12 Dec 1995

5306-17-124-0667
Machine Bolt

171240667
2121 2111-495: RNCC: 3 | RNVC: 2
DIN6921-M10X30-8.8-A3P: RNCC: 5 | RNVC: 9

17 Nov 2011

5306-17-003-2962
Machine Bolt

170032962
ISO4017-BSW5/16"X25MM-CUZN: RNCC: 2 | RNVC: 2

2 Feb 1963

5306-17-710-4513
Machine Bolt

177104513
ASAB18-2-1: RNCC: 4 | RNVC: 1
NEN5571: RNCC: 5 | RNVC: 1
B18-2-1960BLAD10-1-2UNCX1-1-4: RNCC: 6 | RNVC: 9

11 Mar 1968

5306-17-047-1357
Threaded End Rod

170471357
NO PRIMARY REF 17-047-1357: RNCC: 3 | RNVC: 2
412C012: RNCC: 5 | RNVC: 9

8 Apr 1975

5306-17-120-6643
Internal Wrenching Bolt

171206643
UNBRAKO C-1936 NO.8 X "-RVS-A2: RNCC: 3 | RNVC: 2

15 Aug 2007

5306-17-032-2891
Machine Bolt

170322891
NEN5568-5-8-11UNCX2-1-2INCHMONEL: RNCC: 2 | RNVC: 2

21 Aug 1968

5306-17-051-8002
Machine Bolt

170518002
CT-77-1182ALEG7: RNCC: 3 | RNVC: 2

1 May 1981

5306-17-051-8388
Externally Relieved Body Bolt

170518388
046-11-0096009: RNCC: 3 | RNVC: 2

4 Jun 1981

5306-17-002-3560
Machine Bolt

170023560
10651445: RNCC: 3 | RNVC: 2
10253445: RNCC: 5 | RNVC: 2
N2-72-8X10: RNCC: 5 | RNVC: 2

4 Aug 1974

5306-17-034-1092
Bout

170341092
0248007: RNCC: 3 | RNVC: 2
248007: RNCC: 5 | RNVC: 9

19 Aug 1969

5306-17-108-5431
Close Tolerance Bolt

171085431
2231.323 POST 11: RNCC: 3 | RNVC: 2

22 Nov 1994

5306-17-109-6359
Welding Bolt

171096359
0840.023BLAD1-5965: RNCC: 3 | RNVC: 2
5965: RNCC: 3 | RNVC: 2

12 Dec 1995

5306-17-109-6358
Welding Bolt

171096358
0840.023BLAD1-5964: RNCC: 3 | RNVC: 2
5964: RNCC: 3 | RNVC: 2

12 Dec 1995

5306-17-113-2764
Eye Bolt

171132764
MAR-301-50.POS.10.: RNCC: 3 | RNVC: 2

1 May 2000

5306-17-017-6483
Machine Bolt

170176483
3-8X65DIN933MS: RNCC: 2 | RNVC: 2
DIN933 3-8X65MS: RNCC: 2 | RNVC: 2
DIN933: RNCC: 4 | RNVC: 1

6 Mar 1964

5306-17-004-7028
Square Neck Bolt

170047028
M8X100-12CRNI18-8-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

16 Nov 1963

5306-17-047-1708
Drive Shank Bolt

170471708
0508992: RNCC: 3 | RNVC: 2
508992: RNCC: 5 | RNVC: 9

15 Jul 1975

5306-17-104-1670
Pas Affuit Bout

171041670
BW6280-135/18: RNCC: 3 | RNVC: 2
BW6280-135/18: RNCC: 5 | RNVC: 9

15 Mar 1990

5306-17-041-0624
Deurbeug Borst Bout

170410624
NO PRIMARY REF 17-041-0624: RNCC: 3 | RNVC: 2
53213: RNCC: 6 | RNVC: 9

29 Jul 1972

5306-17-001-9846
Machine Bolt

170019846
DIN933 5-16X20MS: RNCC: 2 | RNVC: 2
DIN933-5-61X20MS: RNCC: 2 | RNVC: 2
DIN933: RNCC: 4 | RNVC: 1

21 Aug 1968

5306-17-045-7391
Screw

170457391
NO PRIMARY REF 17-045-7391: RNCC: 3 | RNVC: 2
N04-40X1-4: RNCC: 6 | RNVC: 9

15 Jan 1981

5306-17-102-7812
Machine Bolt

171027812
252203230164: RNCC: 3 | RNVC: 2
2522 032 30164: RNCC: 5 | RNVC: 2
UN-B 058-A4/M5X10: RNCC: 5 | RNVC: 2

10 Jan 1989

5306-17-035-3253
U Bolt

170353253
NO PRIMARY REF 17-035-3253: RNCC: 3 | RNVC: 2
6610739: RNCC: 6 | RNVC: 9

2 Dec 1969

5306-17-102-6006
Internal Wrenching Bolt

171026006
FFVAOE-440263: RNCC: 3 | RNVC: 2
440263: RNCC: 5 | RNVC: 2

19 Oct 1988

5306-17-120-3109
Eye Bolt

171203109
DIN444B-M12X100-A2-70: RNCC: 3 | RNVC: 2

29 Mar 2007

5306-17-111-3920
Machine Bolt

171113920
010100630: RNCC: 3 | RNVC: 2

30 Dec 1997

5306-17-122-8661
Bout

171228661
30404-24700: RNCC: 3 | RNVC: 2

15 Feb 2010

5306-17-116-7899
Machine Bolt

171167899
L47070737: RNCC: 3 | RNVC: 2

25 Jun 2004

5306-17-004-8712
Machine Bolt

170048712
252207714012: RNCC: 3 | RNVC: 2
DIN931: RNCC: 4 | RNVC: 1
NEN2336: RNCC: 4 | RNVC: 1
NE99RVST-1/2"X40: RNCC: 5 | RNVC: 9

21 Feb 1973

5306-17-015-5436
Machine Bolt

170155436
NEN5568-3-8-24UNFX2-8GMR: RNCC: 2 | RNVC: 2

15 Jun 1964

5306-17-120-6008
Close Tolerance Bolt

171206008
EN2874-080038: RNCC: 2 | RNVC: 2

10 Jul 2007

5306-17-120-3110
Eye Bolt

171203110
DIN444B-M16X80-A2-70: RNCC: 3 | RNVC: 2

29 Mar 2007

5306-17-015-8942
Machine Bolt

170158942
NEN5568 3-8IN16UNCX1IN8G: RNCC: 2 | RNVC: 2
NEN5568-3-8-16UNCX1-8G: RNCC: 2 | RNVC: 2
NEN5568: RNCC: 4 | RNVC: 1
E11469-4: RNCC: 6 | RNVC: 9
33DB8393: RNCC: 6 | RNVC: 9

11 Jun 1967

5306-17-054-2747
Close Tolerance Bolt

170542747
NO PRIMARY REF 17-054-2747: RNCC: 3 | RNVC: 2
001-804000-6020-2: RNCC: 5 | RNVC: 9

6 Apr 1983

5306-17-004-6420
Machine Bolt

170046420
NEN5568-1-4-20UNCX1-1-4-8GMR: RNCC: 2 | RNVC: 2

25 Sep 1963

5306-17-104-2292
Externally Relieved Body Bolt

171042292
W007172008: RNCC: 3 | RNVC: 2

10 Apr 1990

5306-17-103-6019
Hook Bolt

171036019
948392: RNCC: 3 | RNVC: 2

19 Sep 1989

5306-17-121-1018
Zeskantkop Bout

171211018
90211-12250: RNCC: 3 | RNVC: 2

19 Feb 2008

5306-17-017-3435
Machine Bolt

170173435
SMS1412B6S6X10D60: RNCC: 2 | RNVC: 2
N2-18B6S6X10D60: RNCC: 3 | RNVC: 2
B6S6X10: RNCC: 3 | RNVC: 2
N2-18-6X10: RNCC: 3 | RNVC: 2
SMS1412: RNCC: 4 | RNVC: 1

8 Oct 1973

5306-17-121-6803
Machine Bolt

171216803
FBSC010410: RNCC: 3 | RNVC: 2
FBSC010410: RNCC: 3 | RNVC: 9
FBSC010410: RNCC: 5 | RNVC: 2

23 Oct 2008

5306-17-114-9392
Tee Head Bolt

171149392
C6955-905.000.129: RNCC: 3 | RNVC: 2

6 Jun 2002

5306-17-003-0951
Square Neck Bolt

170030951
M8X60-4D-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

11 Sep 1963

5306-17-115-3335
Shear Bolt

171153335
NAS6704U27NSCM80205: RNCC: 3 | RNVC: 2
NAS6704U27: RNCC: 5 | RNVC: 2
5306-01-424-4780: RNCC: 6 | RNVC: 9

18 Dec 2002

5306-17-117-7116
Square Neck Bolt

171177116
DIN603-M10X60-A2-70: RNCC: 3 | RNVC: 2

1 Jun 2005

5306-17-116-8615
Eye Bolt

171168615
CROSBY M-279 M30: RNCC: 3 | RNVC: 2

23 Jul 2004

5306-17-003-2980
Machine Bolt

170032980
ISO4014-M8X30-A2-70: RNCC: 2 | RNVC: 2

6 May 1968

5306-17-055-3484
Drive Shank Bolt

170553484
24206/5: RNCC: 3 | RNVC: 2
M6-11-22D12: RNCC: 3 | RNVC: 2

18 Jul 1984

5306-17-056-6381
Bolt

170566381
FON2-1611V03-04: RNCC: 3 | RNVC: 2

21 Nov 1995

5306-17-024-3519
Machine Bolt

170243519
6105464: RNCC: 3 | RNVC: 2

28 Aug 1974

5306-17-117-4054
Close Tolerance Bolt

171174054
EN3052-050003: RNCC: 2 | RNVC: 2

28 Jan 2005

5306-17-037-7593
Speciaal Bout

170377593
4501-04-23-00: RNCC: 3 | RNVC: 2

6 May 1971

5306-17-115-6619
Hexhead Bolt

171156619
01844-051NSCM21439: RNCC: 3 | RNVC: 2
01844-051: RNCC: 5 | RNVC: 2

13 May 2003

5306-17-710-4556
Machine Bolt

177104556
B18-2-1960BLAD10-3-4UNCX2-3-4VZI: RNCC: 2 | RNVC: 2

11 Mar 1968

5306-17-015-5928
Machine Bolt

170155928
NEN5568 7-16IN20UNFX2 1-2IN8G: RNCC: 2 | RNVC: 2
NEN5568-7-16-20UNFX2-1-2-8GMR: RNCC: 2 | RNVC: 2
NEN5568: RNCC: 4 | RNVC: 1

12 Jul 1967

5306-17-015-5373
Machine Bolt

170155373
NEN5568-5-16-18UNCX1-8G: RNCC: 2 | RNVC: 2

15 Jun 1964

5306-17-710-9816
Machine Bolt

177109816
0238661: RNCC: 3 | RNVC: 2
615-2-30-21LEG6: RNCC: 5 | RNVC: 2
238661: RNCC: 5 | RNVC: 9

16 Jun 1972

5306-17-003-0962
Square Neck Bolt

170030962
M10X70-4D-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

11 Sep 1963

5306-17-017-0531
Machine Bolt

170170531
DIN933 1-4X12-8GMU: RNCC: 2 | RNVC: 2
DIN933-1-4X12-8GMU: RNCC: 2 | RNVC: 2
DIN933: RNCC: 4 | RNVC: 1

23 Nov 1963

5306-17-109-9796
Shear Bolt

171099796
NAS6303U43DNSCM80205: RNCC: 3 | RNVC: 2
NAS6303U43D: RNCC: 5 | RNVC: 2

28 Mar 1996

5306-17-027-0861
Close Tolerance Bolt

170270861
1150-10-19-601-07-0: RNCC: 3 | RNVC: 2
A10-19-601-07-0: RNCC: 3 | RNVC: 2
A1019-601-07-0: RNCC: 3 | RNVC: 2
A1019601070: RNCC: 3 | RNVC: 2
A10-19-601-07-0: RNCC: 6 | RNVC: 9
A10-19-601-07-0: RNCC: 6 | RNVC: 9

11 Jul 1974

5306-17-003-0941
Square Neck Bolt

170030941
M8X40-4D-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

11 Sep 1963

5306-17-017-0446
Eye Bolt

170170446
SM3-8ST34: RNCC: 3 | RNVC: 2
BF251300LEG28: RNCC: 5 | RNVC: 2

8 Mar 1964

5306-17-118-0970
Machine Bolt

171180970
EN1665-M12X30-8.8-A3P: RNCC: 2 | RNVC: 2

18 Nov 2005

5306-17-004-7027
Square Neck Bolt

170047027
M8X70-12CRNI18-8-NEN303: RNCC: 2 | RNVC: 2
NEN303: RNCC: 4 | RNVC: 1

16 Nov 1963

5306-17-110-8607
Machine Bolt

171108607
02430-1/2X1.1/4: RNCC: 3 | RNVC: 2
BOLT,1/2X13 1-1/4IN. ST-ELVZ: RNCC: 5 | RNVC: 2

22 Apr 1997