5306-15-110-7684

Machine Bolt

5306151107684 151107684 105.3585

An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. View more Machine Bolt

5306-15-110-7684 BOLT,MACHINE 5306151107684 151107684

Managed by Italy
NSN Created on 29 Jul 1990
Data Last Changed
July 2023
NATO Update Count
1
NATO Data Quality
5306-15-110-7684 BOLT,MACHINE 5306151107684 151107684 1/1
NSN 5306-15-110-7684 (Generic Image) 1/1

5306-15-110-7684 Stock and Availability Marketplace 5306-15-110-7684

Need Help?
Request a Quotation from participating marketplace vendors
eBay Updated Every Day
5306-15-110-7684 RQST NE eBay
eBay Updated Every Day
5306-15-110-7684 RQST eBay
Amazon Updated Every Day
5306-15-110-7684 RQST NE Amazon

5306-15-110-7684 Related Documents Related Documents 5306-15-110-7684 5+ Documents (More...)

SELETTORI FARI ROTA https//www.nsnlookup.com /cage Sirmac Srl (CAGE Code A3648) : 5 11 Dec 1996 5306-15-110-7684
More... ) https//www.nsnlookup.com /fsg-53/fsc-5306 Bolts from Italy (IT) DAC: 1 2 Oct 1987 5306-15-110-7684
3040-01-105-3585 3040011053585 011053585 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.
5945-25-105-3585 5945251053585 251053585 is a relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
5910-00-105-3585 5910001053585 001053585 is a capacitor whose capacitance value cannot be adjusted or varied, having paper as the dielectric material. it may be a single unit or consist of two or more fixed units which cannot be seperated. for items whose dielectric material consist of plasticized (plastic impregnated) paper or paper-plastic combinations, see capacitor, fixed, plastic dielectric. for items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see capacitor, fixed, metalized, paper-plastic dielectric.

5306-15-110-7684 Demil Restrictions 5306-15-110-7684

DEMIL: | DEMILI: | CRITICALITY: | HMIC: | PMIC: | EDC: | ADPEC:

5306-15-110-7684 is a Machine Bolt

5306-15-110-7684 End Users End Users 5306-15-110-7684

Italy (ZR)

5306-15-110-7684 Manufacturers Approved Sources 5306-15-110-7684

5306-15-110-7684 Related Items NATO Stock Numbers Related to 5306-15-110-7684