What is Federal Supply Class 5306?

FSC 5306 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5306) in the USA for supply items codified in the category of Bolts.

What is NATO Supply Classification Class 5306?

NSC 5306 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5306 in the USA) for supply items codified in the category of Bolts.

Which Federal Supply Group is FSC 5306 in?

FSC 5306 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5306 in?

NSC 5306is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Machine Bolt?

A Machine Bolt (BOLT,MACHINE) is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

An Eye Bolt (BOLT,EYE) is an externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also BOLT, HOOK. Excludes CONNECTOR, ROD END.

Bolts - Austria (AT)

Federal Supply Class (FSC): 5306

NATO Supply Classification Class (NSC): 5306

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Austria (AT) - NCB is 41

NSN Format for Bolts
Codified by Austria

53	06	41	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

Bolts are a type of mechanical fastener designed with external threads. Bolts are used with a nut to join parts together using tightening torque. The torque creates surface pressure between the bolt thread and its mating nut thread. This surface pressure increases the friction between the two threads and this increasing friction makes it increasingly more difficult for the nut to move and release the torque separating the parts again. These fasteners are intended to be inserted through holes that are pre-drilled in the material being joined. Unlike screws, which are also externally threaded fasteners, nuts and bolts work together, meaning that bolts require a nut to be threaded on to it to function properly and require a drilled hole into which the bolt may be inserted.

The terms “bolting” or “types of bolting” are rarely used in connection with bolts in the context of fasteners, these terms being associated more with fabric bolting and bolting machines used in the fabric industry.

FSC 5306 Bolts - Austria (AT)

Frequently Asked Questions(FAQ) for Federal Supply Class 5306

What is Federal Supply Class 5306?: FSC 5306 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5306) in the USA for supply items codified in the category of Bolts.
What is NATO Supply Classification Class 5306?: NSC 5306 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5306 in the USA) for supply items codified in the category of Bolts.
Which Federal Supply Group is FSC 5306 in?: FSC 5306 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5306 in?: NSC 5306 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5306

What is a Machine Bolt? 30 Items: A Machine Bolt (BOLT,MACHINE) is an externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
What is an Eye Bolt? 33 Items: An Eye Bolt (BOLT,EYE) is an externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also BOLT, HOOK. Excludes CONNECTOR, ROD END.