5305-01-699-5680

4710-12-702-1190 4710127021190 127021190 is a bent hollow item, welded or seamless. it has a round cross section with a continuous periphery. it is primarily designed to convey fluids, gasses, and/or semisolids. excludes elbow, pipe; elbow, tube; bend, electrical conduit; bend, pipe, return; and bend, tube, return.

5310-99-702-1190 5310997021190 997021190 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5910-00-702-1190 5910007021190 007021190

5821-17-702-1190 5821177021190 177021190 CHASSIS ASSEMBLY

5995-01-702-1190 5995017021190 017021190 is a definite length of one-conductor electrical wire, wire braid, or other conductive material, except cable or cord, one or both ends of which are processed or terminated. the lead may be of any size or shape, insulated or uninsulated. see also lead, test and bus conductor. excludes lead, storage battery; lead, ignition, engine, and items having attached switches, lampholders, suppressors, resistors, and the like.