Premium Information is available for this item - Upgrade for $1 a day
5305-01-660-3482
Close Tolerance Screw
5305016603482 016603482 TX1026C5D19A 3M1169C5D19A
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
1
Marketplace 5305-01-660-3482
Request a Quotation from participating marketplace vendors
Restrictions 5305-01-660-3482
5305-01-660-3482 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-660-3482
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-660-3482
- US Navy (N9BZ)
- Effective Date:
- 1 Jan 2017
- Supplementary Collaborators:
- KE
Approved Sources 5305-01-660-3482
- Part Number
- Manufacturer
- Status
- 3M1169C5D19A
- Manufacturer
- 76301 - The Boeing Company (Active)
- Source Control
- Source Control
- TX1026C5D19A
- 27624 - Sps Technologies Llc (Active)
- Primary Buy
- Primary Buy
- TX1026C5D19A
- 56878 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- TX1026C5D19A
- 73197 - Hi-Shear Corporation (Active)
- Primary Buy
- Primary Buy
- TX1026C5D19A
- 80539 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- TX1026C5D19A
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- TX1026C5D19A
- 06725 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- 3M1169C5D19A
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- TX1026C5D19A
- C4293 - Fairchild Fasteners Europe - Vsd (Active)
- Secondary Buy
- Secondary Buy
- 3M1169C5D19A
- 0ZC92 - Heartland Precision Fasteners Inc (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5305-01-660-3482
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 1.5465 Inches Nominal First Hole
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 1.6415 Inches Minimum And 1.6715 Inches Maximum
- Grip Diameter [AAUR]
- 0.3110 Inches Minimum And 0.3120 Inches Maximum
- Grip Length [ANEE]
- 1.1775 Inches Minimum And 1.1975 Inches Maximum
- Head Diameter [AASL]
- 0.6230 Inches Minimum And 0.6335 Inches Maximum
- Head Height [AASU]
- 0.138 Inches Nominal
- Head Style [AASK]
- Flat Countersunk
- Hole Diameter [AAUB]
- 0.076 Inches Minimum And 0.086 Inches Maximum
- Hole Quantity [ASXK]
- 1
- Hole Type [BQDM]
- Drilled
- End Item Identification [AGAV]
- F/A-18 E/F
- Material [MATT]
- Nickel Alloy 718 Overall
- Nominal Thread Diameter [AHYM]
- 0.3125 Inches
- Part Name Assigned By Controlling Agency [CXCY]
- Bolt,100 Degree Tension Head,Gear Drive Recess - Ph13-8Mo(125 Ksi Shear)Inconel 718(125 Ksi Shear),6Al-4V Titanium(95 Ksi Shear)
- Internal Drive Style [ABQZ]
- Torx
- Material Document And Classification [MDCL]
- Ams 5662 National Std/Spec Single Material Response Overall
- Shank Unthreaded Hole Diameter [AAWB]
- 0.076 Inches Minimum And 0.086 Inches Maximum First Hole
- Single Shear Strength [AAWU]
- 125000 Pounds Per Square Inch
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.469 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 24
- Thread Series Designator [THSD]
- Unjf
- Specification/Standard Data [ZZZK]
- 76301-3-1169 Manufacturers Standard
- Spline Major Diameter [AAUJ]
- 0.221 Inches Nominal
- Surface Finish [CSYM]
- 125.0 Microinches First Hole
- Surface Finish [CSYM]
- 32.0 Microinches Grip
- Surface Finish [CSYM]
- 32.0 Microinches Head
- Surface Finish [CSYM]
- 32.0 Microinches Threads
- Surface Treatment [SFTT]
- Passivate Overall
Weapon Systems (WSDC) 5305-01-660-3482
DLA Procurement Analysis 5305-01-660-3482
- Last Stock Position:
- 65 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-660-3482
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5305-01-660-3482
Freight Information 5305-01-660-3482
5305-01-660-3482 has freight characteristics.. 5305-01-660-3482 has a variance between NMFC and UFC when transported by rail and the description should be consulted.
Procurement History 5305-01-660-3482 1 Records
Contracting Technical Data File (CTDF) 5305-01-660-3482 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: