Premium Information is available for this item - Upgrade for $1 a day
5305-01-614-4930
Close Tolerance Screw
5305016144930 016144930 NAS7804U7
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
3
Marketplace 5305-01-614-4930
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-614-4930 1+ Documents (More...)
RQST NE Updated Every Day 5305-01-614-4930 RQST Updated Every Day 5305-01-614-4930 RQST NE Related Documents
5305-01-614-4930 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305-01-614-4930
Restrictions 5305-01-614-4930
5305-01-614-4930 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5305-01-614-4930
- US Air Force (FLL5)
- Effective Date:
- 1 Dec 2012
Approved Sources 5305-01-614-4930
- Part Number
- Manufacturer
- Status
- NAS7804U7
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 5305-01-614-4930
- Characteristic
- Specifications
- Fastener Length [AASB]
- Specifications
- 0.808 Inches Nominal
- Grip Diameter [AAUR]
- 0.2490 Inches Minimum And 0.2495 Inches Maximum
- Grip Length [ANEE]
- 0.438 Inches Nominal
- Head Height [AASU]
- 0.162 Inches Minimum And 0.175 Inches Maximum
- Head Diameter [AASL]
- 0.473 Inches Minimum And 0.492 Inches Maximum
- Head Style [AASK]
- Pan
- End Item Identification [AGAV]
- C-5M
- Material [MATT]
- Iron Alloy 660 Overall
- Nominal Thread Diameter [AHYM]
- 0.2500 Inches
- Internal Drive Style [ABQZ]
- Cruciform Ribbed
- Thread Quantity Per Inch [CMLP]
- 28
- Thread Series Designator [THSD]
- Unjf
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.370 Inches Nominal
Similar Supply Items to 5305-01-614-4930
Freight Information 5305-01-614-4930
5305-01-614-4930 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-614-4930 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-614-4930 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-614-4930 is not classified as a special type of cargo when transported by water. 5305-01-614-4930 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.