Premium Information is available for this item - Upgrade for $1 a day
5305-01-614-1465
Close Tolerance Screw
5305016141465 016141465 NAS1157E9P
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
3
Marketplace 5305-01-614-1465
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-614-1465 1+ Documents (More...)
5305-01-614-1465 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305-01-614-1465
Every Day 5305-01-614-1465 RQST NE Restrictions 5305-01-614-1465 DEMIL: A | DEMILI : 1 | CRITICALITY
Restrictions 5305-01-614-1465
5305-01-614-1465 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5305-01-614-1465
- United Kingdom (ZK01)
- Effective Date:
- 1 Nov 2012
Approved Sources 5305-01-614-1465
- Part Number
- Manufacturer
- Status
- NAS1157E9P
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 5305-01-614-1465
- Characteristic
- Specifications
- Countersink Angle [CRSQ]
- Specifications
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 1.562 Inches Minimum And 1.592 Inches Maximum
- Grip Diameter [AAUR]
- 0.4360 Inches Minimum And 0.4370 Inches Maximum
- Grip Length [ANEE]
- 0.552 Inches Minimum And 0.572 Inches Maximum
- Head Diameter [AASL]
- 0.880 Inches Minimum And 0.890 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Steel Corrosion Resisting Overall
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.438 Inches
- Internal Drive Style [ABQZ]
- Offset Cruciform (Torque Set)
- Material Document And Classification [MDCL]
- Ams5737 Assn Std Single Material Response Overall
- Part Name Assigned By Controlling Agency [CXCY]
- Screw Machine-Flat, 100 Degree Head, Close Tolerance, Short Thread, Offset Cruciform, 160 Ksi
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 20
- Specification/Standard Data [ZZZK]
- 80205-Nas1157 Professional/Industrial Association Standard
- Surface Treatment Document And Classification [STDC]
- Qq-P-416, Type 2, Class 2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.453 Inches Nominal
Similar Supply Items to 5305-01-614-1465
Freight Information 5305-01-614-1465
5305-01-614-1465 has freight characteristics.. 5305-01-614-1465 has a variance between NMFC and UFC when transported by rail and the description should be consulted.