Premium Information is available for this item - Upgrade for $1 a day
5305-01-611-7029
Assembled Washer Screw
5305016117029 016117029 NAS720-8-7
A SCREW, (as modified) to which has been assembled one or more nonremovable washer(s). View more Assembled Washer Screw
May 2023
2
Marketplace 5305-01-611-7029
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-611-7029 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5305-01-611-7029 RQST NE Updated Every Day 5305-01-611-7029 RQST
Updated Every Day 5305-01-611-7029 RQST NE Related Documents 5305-01-611-7029 1+ Documents ( More...
Restrictions 5305-01-611-7029
5305-01-611-7029 is a Assembled Washer Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-611-7029
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-611-7029
- US Air Force (FGGI)
- Effective Date:
- 1 Sep 2012
Approved Sources 5305-01-611-7029
- Part Number
- Manufacturer
- Status
- NAS720-8-7
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 5305-01-611-7029
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Fastener Length [AASB]
- 0.406 Inches Minimum And 0.438 Inches Maximum
- Head Height [AASU]
- 0.085 Inches Minimum And 0.096 Inches Maximum
- Head Diameter [AASL]
- 0.306 Inches Minimum And 0.322 Inches Maximum
- Head Style [AASK]
- Pan No. 2
- Material [MATT]
- Steel Comp 1017 Or Steel Comp 1020 Or Steel Comp 1025 Secondary Washer
- Material [MATT]
- Steel Comp 1010 Fastener
- Material [MATT]
- Steel Comp 1060 Or Steel Comp 1561 Or Steel Comp 1566 Or Steel Comp 1069 Or Steel Comp 1070 Or Steel Comp 1071 Or Steel Comp 1572 Or Steel Comp 1074 Or Steel Comp 1075 Or Steel Comp 1078 Or Steel Comp 1080 Primary Washer
- Nominal Thread Diameter [AHYM]
- 0.164 Inches
- Internal Drive Style [ABQZ]
- Cross Recess Type Iii
- Primary Washer Style [CTHW]
- Split Helical Ring
- Primary Washer Material Thickness [CTJJ]
- 0.040 Inches Minimum
- Primary Washer Outside Diameter [CSPG]
- 0.296 Inches Maximum
- Secondary Washer Material Thickness [CWBW]
- 0.013 Inches Minimum And 0.019 Inches Maximum
- Secondary Washer Outside Diameter [CTDQ]
- 0.307 Inches Minimum And 0.317 Inches Maximum
- Secondary Washer Relationship To Primary Washer [CRGX]
- Not Identical
- Secondary Washer Style [CRYT]
- Flat
- Thread Series Designator [THSD]
- Unc
- Thread Quantity Per Inch [CMLP]
- 32
- Washer Quantity [AAVW]
- 2
- Surface Treatment [SFTT]
- Cadmium And Chromate Overall
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.329 Inches Maximum
DLA Procurement Analysis 5305-01-611-7029
Management Data 5305-01-611-7029
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5305-01-611-7029
Freight Information 5305-01-611-7029
5305-01-611-7029 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-611-7029 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-611-7029 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-611-7029 is not classified as a special type of cargo when transported by water. 5305-01-611-7029 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5305-01-611-7029 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: