Premium Information is available for this item - Upgrade for $1 a day
5305-01-591-1409
Close Tolerance Screw
5305015911409 015911409 HT4027-6-23 WC4027-6-23 ST3M557-6-23 11923-6-23
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
May 2023
1
Marketplace 5305-01-591-1409
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-591-1409 3+ Documents (More...)
Restrictions 5305-01-591-1409
5305-01-591-1409 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-591-1409
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-591-1409
- US Air Force (FGGI)
- Effective Date:
- 1 Jan 2011
Approved Sources 5305-01-591-1409
- Part Number
- Manufacturer
- Status
- HT4027-6-23
- Manufacturer
- 06725 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- WC4027-6-23
- 60519 - Farbest Corp Sub Of Kaiser (Active)
- Primary Buy
- Primary Buy
- HT4027-6-23
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-6-23
- U6683 - Linread Ltd (Active)
- Secondary Buy
- Secondary Buy
- HT4027-6-23
- 17446 - Huck International, Inc. (Active)
- Secondary Buy
- Secondary Buy
- HT4027-6-23
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- HT4027-6-23
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- HT4027-6-23
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- 11923-6-23
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- HT4027-6-23
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-6-23
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-6-23
- 0K6Z0 - Saturn Fasteners Inc (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-6-23
- 0ZC92 - Heartland Precision Fasteners Inc (Active)
- Secondary Buy
- Secondary Buy
- HT4027-6-23
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-6-23
- 1VSL7 - Houston Precision Fasteners I Lp (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-6-23
- 4WL75 - Camcar Llc (Active)
- Secondary Buy
- Secondary Buy
- HT4027-6-23
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-6-23
- 76301 - The Boeing Company (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5305-01-591-1409
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 2.064 Inches Minimum And 2.094 Inches Maximum
- Grip Diameter [AAUR]
- 0.374 Nominal Mils And 0.375 Nominal Centimeters
- Grip Length [ANEE]
- 1.428 Nominal Mils And 1.448 Nominal Centimeters
- Head Height [AASU]
- 0.018 Inches Maximum
- Head Diameter [AASL]
- 0.510 Inches Minimum And 0.564 Inches Maximum
- Head Style [AASK]
- Fillister Countersunk
- Material [MATT]
- Nickel Alloy 718 Overall
- Nominal Thread Diameter [AHYM]
- 0.375 Inches
- Internal Drive Style [ABQZ]
- High-Torque
- Material Document And Classification [MDCL]
- Ams 5662 Assn Std Single Material Response Overall
- Part Name Assigned By Controlling Agency [CXCY]
- Screw-Close Tolerance, 100 Deg Countersunk, Reduced Head, Hi-Torque, Non-Magnetic Cres (125 Ksi Fsu)
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 24
- Surface Treatment Document And Classification [STDC]
- Mas 2700 Method 1 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.641 Inches Nominal
DLA Procurement Analysis 5305-01-591-1409
Management Data 5305-01-591-1409
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5305-01-591-1409
Freight Information 5305-01-591-1409
5305-01-591-1409 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-591-1409 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-591-1409 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-591-1409 is not classified as a special type of cargo when transported by water. 5305-01-591-1409 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5305-01-591-1409 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: