Premium Information is available for this item - Upgrade for $1 a day
5305-01-574-4451
Assembled Washer Screw
5305015744451 015744451 90316A538
A SCREW, (as modified) to which has been assembled one or more nonremovable washer(s). View more Assembled Washer Screw
September 2023
1
Marketplace 5305-01-574-4451
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-574-4451 3+ Documents (More...)
Restrictions 5305-01-574-4451
5305-01-574-4451 is a Assembled Washer Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-574-4451
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-574-4451
- US Army (A919)
- Effective Date:
- 1 May 2009
- Supplementary Receivers:
- AJ
Approved Sources 5305-01-574-4451
- Part Number
- Manufacturer
- Status
- 90316A538
- Manufacturer
- 97852 - Star Stainless Screw Co (Active)
- Primary Buy
- Primary Buy
- 90316A538
- 39428 - Mcmaster-Carr Supply Co (Active)
- Secondary Buy
- Secondary Buy
Datasheet 5305-01-574-4451
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Thread Series Designator [THSD]
- Unc
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Thread Quantity Per Inch [CMLP]
- 20
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.625 Inches Nominal
- Fastener Length [AASB]
- 0.625 Inches Nominal
- Material [MATT]
- Steel Property Class 18.8 Overall
- Hardness Rating [CQFM]
- 80.0 Rockwell B Nominal Overall
- Minimum Tensile Strength [CQBC]
- 72000 Pounds Per Square Inch
- Head Style [AASK]
- Hexagon Extended Washer
- Head Diameter [AASL]
- 0.375 Inches Nominal
- Head Height [AASU]
- 0.240 Inches Nominal
- Internal Drive Style [ABQZ]
- Slot
- Washer Quantity [AAVW]
- 1
- Primary Washer Style [CTHW]
- Flat
- End Item Identification [AGAV]
- 4520-01-566-6669, Heater,Water 400,00
- Part Name Assigned By Controlling Agency [CXCY]
- Hex Washer Head Slotted
Weapon Systems (WSDC) 5305-01-574-4451
DLA Procurement Analysis 5305-01-574-4451
Management Data 5305-01-574-4451
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Army (DA)
- EA
- Subscribe
- 1
- EA
- Feb 2022
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- EA
- Oct 2019
- Department of the Army (DA)
- EA
- Subscribe
- EA
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
NATO Stock Numbers Related to 5305-01-574-4451
Freight Information 5305-01-574-4451
5305-01-574-4451 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-574-4451 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-574-4451 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-574-4451 is not classified as a special type of cargo when transported by water. 5305-01-574-4451 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5305-01-574-4451 3 Records
Contracting Technical Data File (CTDF) 5305-01-574-4451 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: