Premium Information is available for this item - Upgrade for $1 a day
5305-01-570-0518
Externally Relieved Body Screw
5305015700518 015700518 91400A539
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING. View more Externally Relieved Body Screw
June 2023
1
Marketplace 5305-01-570-0518
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-570-0518 1+ Documents (More...)
5305-01-570-0518 RQST NE Related Documents 5305-01-570-0518 1+ Documents ( More... ) https//www.nsnlookup.com
/fsg-53/fsc-5305/us 5305-01-570-0518 Externally Relieved Body Screw 5305015700518 91400A539 An externally
Restrictions 5305-01-570-0518
5305-01-570-0518 is a Externally Relieved Body Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-570-0518
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-570-0518
- US Air Force (FUGI)
- Effective Date:
- 1 Nov 2011
- US Navy (N9BZ)
- Effective Date:
- 1 Jan 2014
- Supplementary Collaborators:
- HX
- NATO Maintenance and Supply Agency (ZX01)
- Effective Date:
- 1 Dec 2008
Approved Sources 5305-01-570-0518
- Part Number
- Manufacturer
- Status
- 91400A539
- Manufacturer
- 39428 - Mcmaster-Carr Supply Co (Active)
- Primary Buy
- Primary Buy
Datasheet 5305-01-570-0518
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Thread Quantity Per Inch [CMLP]
- 20
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.625 Inches Nominal
- Fastener Length [AASB]
- 0.625 Inches Nominal
- Material [MATT]
- Steel Corrosion Resisting Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Minimum Tensile Strength [CQBC]
- 80000 Pounds Per Square Inch
- Head Style [AASK]
- Pan
- Head Diameter [AASL]
- 0.492 Inches Nominal
- Head Height [AASU]
- 0.175 Inches Nominal
- Special Features [FEAT]
- Phillips Drive Style
Weapon Systems (WSDC) 5305-01-570-0518
DLA Procurement Analysis 5305-01-570-0518
- Last Stock Position:
- 3 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-570-0518
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5305-01-570-0518
Freight Information 5305-01-570-0518
5305-01-570-0518 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-570-0518 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-570-0518 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-570-0518 is not classified as a special type of cargo when transported by water. 5305-01-570-0518 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 5305-01-570-0518 4 Records
Contracting Technical Data File (CTDF) 5305-01-570-0518 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: