Premium Information is available for this item - Upgrade for $1 a day
5305-01-542-5727
Close Tolerance Screw
5305015425727 015425727 NAS5315E3-6 120-265E3-6
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
6
Marketplace 5305-01-542-5727
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-542-5727 1+ Documents (More...)
NAS5315E3-6 SCREW,CLOSE TOLERANCE 250 EA NS Request Quotation FedMall Updated Every 15 Minutes 5305-01
-542-5727 BUY NE FedMall Updated Every Day 5305-01-542-5727 RQST NE Updated Every Day 5305-01-542-5727
Restrictions 5305-01-542-5727
5305-01-542-5727 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5305-01-542-5727
- US Air Force (FGGI)
- Effective Date:
- 1 Jun 2009
- Former MOE Rule:
- FGKE
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2009
- Supplementary Collaborators:
- GTKE
Approved Sources 5305-01-542-5727
- Part Number
- Manufacturer
- Status
- NAS5315E3-6
- Manufacturer
- 97499 - Bell Textron Inc (Active)
- Primary Buy
- Primary Buy
- NAS5315E3-6
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- NAS5315E3-6
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- NAS5315E3-6
- 1EM77 - B & B Specialties Inc (Active)
- Secondary Buy
- Secondary Buy
- NAS5315E3-6
- 0K6Z0 - Saturn Fasteners Inc (Active)
- Secondary Buy
- Secondary Buy
- NAS5315E3-6
- 0ZC92 - Heartland Precision Fasteners Inc (Active)
- Secondary Buy
- Secondary Buy
- NAS5315E3-6
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- NAS5315E3-6
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- NAS5315E3-6
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- NAS5315E3-6
- 80205 - National Aerospace Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 120-265E3-6
- 97499 - Bell Textron Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Weapon Systems (WSDC) 5305-01-542-5727
DLA Procurement Analysis 5305-01-542-5727
- Last Stock Position:
- 22 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-542-5727
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NV
- JOINT VERTICAL LIFT AIRCRAFT CV-22 (OSPREY)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- V2
- MV-22 Aircraft
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 5305-01-542-5727
Freight Information 5305-01-542-5727
5305-01-542-5727 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-542-5727 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-542-5727 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5305-01-542-5727 is not classified as a special type of cargo when transported by water. 5305-01-542-5727 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-542-5727
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 5305-01-542-5727 9 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A518V2782
- 11 Jul 2018
- Subscribe
- 705
- Subscribe
- Subscribe
- Subscribe
- SPE4A517V1251
- 08 Dec 2016
- Subscribe
- 496
- Subscribe
- Subscribe
- Subscribe
- SPE4A516V1811
- 16 Feb 2016
- Subscribe
- 316
- Subscribe
- Subscribe
- Subscribe
- SPE4A515V1129
- 23 Dec 2014
- Subscribe
- 229
- Subscribe
- Subscribe
- Subscribe
- SPE4A514V2337
- 06 May 2014
- Subscribe
- 140
- Subscribe
- Subscribe
- Subscribe
- SPE4A513M8361
- 10 Sep 2013
- Subscribe
- 64
- Subscribe
- Subscribe
- Subscribe
- SPE4A513M7101
- 23 Jul 2013
- Subscribe
- 35
- Subscribe
- Subscribe
- Subscribe
- SPE4A413VA364
- 29 Apr 2013
- Subscribe
- 6
- Subscribe
- Subscribe
- Subscribe
- SPE4A713V0554P00001
- 18 Feb 2013
- Subscribe
- 18
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5305-01-542-5727 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: