Premium Information is available for this item - Upgrade for $1 a day
5305-01-530-6556
Close Tolerance Screw
5305015306556 015306556 HT4069-3D5A WC4069-3D5 3M927-3DL5
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
4
Marketplace 5305-01-530-6556
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-530-6556 2+ Documents (More...)
RQST NE Updated Every Day 5305-01-530-6556 RQST Updated Every Day 5305-01-530-6556 RQST NE Related Documents
5305-01-530-6556 2+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305-01-530-6556
Close Tolerance Screw 5305015306556 015306556 day Upgrade your Account Upgrade 5305-01-530-6556Close
Tolerance Screw5305015306556 015306556 HT4069-3D5A Float Valve 4820010763625010763625,FT00650 vendors
Restrictions 5305-01-530-6556
5305-01-530-6556 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-530-6556
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-530-6556
- US Air Force (FGGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FGKZ
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 2008
Approved Sources 5305-01-530-6556
- Part Number
- Manufacturer
- Status
- HT4069-3D5A
- Manufacturer
- 73197 - Hi-Shear Corporation (Active)
- Primary Buy
- Primary Buy
- HT4069-3D5A
- L4528 - Lisi Aerospace Canada Corp (Active)
- Primary Buy
- Primary Buy
- HT4069-3D5A
- 56878 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- 3M927-3DL5
- 58998 - Fastener Innovation Technology, Inc. (Active)
- Primary Buy
- Primary Buy
- WC4069-3D5
- 60516 - West Coast Aerospace, Inc. (Active)
- Primary Buy
- Primary Buy
- HT4069-3D5A
- 1RC86 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- HT4069-3D5A
- 80539 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- 3M927-3DL5
- 007R1 - Twist Tite Mfg, Inc (Active)
- Secondary Buy
- Secondary Buy
- 3M927-3DL5
- 76301 - The Boeing Company (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5305-01-530-6556
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 100.0 Degrees Nominal
- Fastener Length [AASB]
- 0.703 Inches Minimum And 0.733 Inches Maximum
- Grip Diameter [AAUR]
- 0.190 Inches Nominal
- Grip Length [ANEE]
- 0.302 Inches Minimum And 0.322 Inches Maximum
- Head Diameter [AASL]
- 0.296 Inches Minimum And 0.301 Inches Maximum
- Head Style [AASK]
- Oval Countersunk
- Material [MATT]
- Nickel Alloy 718 Overall
- Nominal Thread Diameter [AHYM]
- 0.190 Inches
- Internal Drive Style [ABQZ]
- High-Torque
- Material Document And Classification [MDCL]
- Ams 5662 Assn Std Single Material Response Overall
- Part Name Assigned By Controlling Agency [CXCY]
- Screw, Close Tolerance
- Special Features [FEAT]
- Drilled Threads
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 32
- Surface Treatment Document And Classification [STDC]
- Mil-C-83488 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Aluminum Overall And Chromate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.406 Inches Nominal
Weapon Systems (WSDC) 5305-01-530-6556
DLA Procurement Analysis 5305-01-530-6556
- Last Stock Position:
- 172 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-530-6556
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5305-01-530-6556
Freight Information 5305-01-530-6556
5305-01-530-6556 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095190. A Sub NMFC of Z. It has a NMFC Description of HARDWARE, NOI. 5305-01-530-6556 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 49790 which rates the freight between FCL and LCL. 5305-01-530-6556 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-530-6556 is not classified as a special type of cargo when transported by water. 5305-01-530-6556 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-530-6556
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 5305-01-530-6556 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: