Premium Information is available for this item - Upgrade for $1 a day
5305-01-530-2410
Close Tolerance Screw
5305015302410 015302410 120-265E3-4 NAS5315E3-4
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
3
Marketplace 5305-01-530-2410
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-530-2410 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5305-01-530-2410 RQST NE Updated Every Day 5305-01-530-2410 RQST
Updated Every Day 5305-01-530-2410 RQST NE Related Documents 5305-01-530-2410 1+ Documents ( More...
Restrictions 5305-01-530-2410
5305-01-530-2410 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-530-2410
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-530-2410
- US Air Force (FGGI)
- Effective Date:
- 1 Dec 2010
- Former MOE Rule:
- FGKE
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2010
- Supplementary Collaborators:
- GTKE
Approved Sources 5305-01-530-2410
- Part Number
- Manufacturer
- Status
- 120-265E3-4
- Manufacturer
- 97499 - Bell Textron Inc (Active)
- Primary Buy
- Primary Buy
- 120-265E3-4
- 0K6Z0 - Saturn Fasteners Inc (Active)
- Secondary Buy
- Secondary Buy
- 120-265E3-4
- 0ZC92 - Heartland Precision Fasteners Inc (Active)
- Secondary Buy
- Secondary Buy
- 120-265E3-4
- 1EM77 - B & B Specialties Inc (Active)
- Secondary Buy
- Secondary Buy
- 120-265E3-4
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- 120-265E3-4
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 120-265E3-4
- 62206 - B & B Specialties Inc (Active)
- Secondary Buy
- Secondary Buy
- 120-265E3-4
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 120-265E3-4
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 120-265E3-4
- 62384 - Lfc Industries, Inc. (Active)
- Secondary Buy
- Secondary Buy
- NAS5315E3-4
- 97499 - Bell Textron Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-530-2410
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 100.0 Degrees Nominal
- Fastener Length [AASB]
- 0.511 Inches Minimum And 0.541 Inches Maximum
- Grip Diameter [AAUR]
- 0.189 Inches Minimum And 0.190 Inches Maximum
- Grip Length [ANEE]
- 0.250 Inches Nominal
- Head Diameter [AASL]
- 0.376 Inches Minimum And 0.385 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Steel Corrosion Resisting Overall
- Minimum Tensile Strength [CQBC]
- 3180 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.190 Inches
- Internal Drive Style [ABQZ]
- Torx
- Material Document And Classification [MDCL]
- A286 Assn Std Single Material Response Overall
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 32
- Spline Major Diameter [AAUJ]
- 0.155 Inches Nominal
- Surface Treatment Document And Classification [STDC]
- Ams-Qq-P-35 Fed Spec Single Treatment Response Overall Or Ams-Qq-P-416, Type 2, Class 2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall Or Cadmium Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.276 Inches Nominal
Weapon Systems (WSDC) 5305-01-530-2410
DLA Procurement Analysis 5305-01-530-2410
- Last Stock Position:
- 138 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-530-2410
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NV
- JOINT VERTICAL LIFT AIRCRAFT CV-22 (OSPREY)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- V2
- MV-22 Aircraft
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 5305-01-530-2410
Freight Information 5305-01-530-2410
5305-01-530-2410 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-530-2410 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-530-2410 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-530-2410 is not classified as a special type of cargo when transported by water. 5305-01-530-2410 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-530-2410
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 5305-01-530-2410 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE5E218V2483
- 19 Dec 2017
- Subscribe
- 1029
- Subscribe
- Subscribe
- Subscribe
- SPE5E217V7783P00001
- 31 May 2017
- Subscribe
- 559
- Subscribe
- Subscribe
- Subscribe
- SPE4A515V1697
- 20 Feb 2015
- Subscribe
- 487
- Subscribe
- Subscribe
- Subscribe
- SPE4A514V2095
- 11 Apr 2014
- Subscribe
- 460
- Subscribe
- Subscribe
- Subscribe
- SPE4A413VA736
- 02 May 2013
- Subscribe
- 174
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5305-01-530-2410 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: