Premium Information is available for this item - Upgrade for $1 a day
5305-01-520-9379
Close Tolerance Screw
5305015209379 015209379 NAS5314V3A3 120-259V3A3
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
5
Marketplace 5305-01-520-9379
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-520-9379 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5305-01-520-9379 RQST NE Updated Every Day 5305-01-520-9379 RQST
Updated Every Day 5305-01-520-9379 RQST NE Related Documents 5305-01-520-9379 1+ Documents ( More...
Restrictions 5305-01-520-9379
5305-01-520-9379 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-520-9379
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-520-9379
- US Air Force (FGGI)
- Effective Date:
- 1 Dec 2010
- Former MOE Rule:
- FGKE
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2010
- Supplementary Collaborators:
- GTKE
Approved Sources 5305-01-520-9379
- Part Number
- Manufacturer
- Status
- NAS5314V3A3
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- 120-259V3A3
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- 120-259V3A3
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 120-259V3A3
- 62206 - B & B Specialties Inc (Active)
- Secondary Buy
- Secondary Buy
- 120-259V3A3
- 00539 - Del Mar Avionics, Llc (Active)
- Secondary Buy
- Secondary Buy
- 120-259V3A3
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- 120-259V3A3
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 120-259V3A3
- 0K6Z0 - Saturn Fasteners Inc (Active)
- Secondary Buy
- Secondary Buy
- 120-259V3A3
- 0ZC92 - Heartland Precision Fasteners Inc (Active)
- Secondary Buy
- Secondary Buy
- 120-259V3A3
- 1EM77 - B & B Specialties Inc (Active)
- Secondary Buy
- Secondary Buy
- 120-259V3A3
- 97499 - Bell Textron Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-520-9379
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- End Item Identification [AGAV]
- Mv-22 (V-22 Lrip1)
- Fastener Length [AASB]
- 0.591 Inches Nominal
- Grip Diameter [AAUR]
- 0.189 Inches Nominal
- Grip Length [ANEE]
- 0.188 Inches Nominal
- Head Height [AASU]
- 0.127 Inches Nominal
- Head Diameter [AASL]
- 0.547 Inches Nominal
- Head Style [AASK]
- Undercut Pan No. 2
- Material [MATT]
- Titanium Alloy Uns R54520 Overall
- Minimum Tensile Strength [CQBC]
- 3180 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.190 Inches
- Internal Drive Style [ABQZ]
- Torx
- Material Document And Classification [MDCL]
- Ams 4928 Fed Spec 1St Material Response Overall Or Ams 4967 Fed Spec 2Nd Material Response Overall
- Part Name Assigned By Controlling Agency [CXCY]
- Screw, Shear, Pan Head, Close Tolerance, Short Thread, Six Lobe Recess, 95 Ksi Fsu
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 32
- Spline Major Diameter [AAUJ]
- 0.155 Inches Nominal
- Surface Treatment Document And Classification [STDC]
- Nas4006 Assn Std 1St Treatment Response Overall And Cetyl Alcohol Lubricant Per Mil-L-87132, Type 3, Grade B Mil Spec 2Nd Treatment Response Overall
- Surface Treatment [SFTT]
- Paint Overall And Lubricant Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.260 Inches Nominal
Weapon Systems (WSDC) 5305-01-520-9379
DLA Procurement Analysis 5305-01-520-9379
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-520-9379
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- V2
- MV-22 Aircraft
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 5305-01-520-9379
Freight Information 5305-01-520-9379
5305-01-520-9379 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-520-9379 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-520-9379 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-520-9379 is not classified as a special type of cargo when transported by water. 5305-01-520-9379 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-520-9379
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Procurement History 5305-01-520-9379 4 Records
Contracting Technical Data File (CTDF) 5305-01-520-9379 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: