Premium Information is available for this item - Upgrade for $1 a day
5305-01-513-9494
Close Tolerance Screw
5305015139494 015139494 WC4027-3-10 ST3M557-3-10 HT4027-3-10 10457107 ST3M557
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
10
Marketplace 5305-01-513-9494
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-513-9494 5+ Documents (More...)
Buy RNCC 5 RNVC 2 DAC 5 ST3M557-3-10 06710 - Valley-Todeco, Inc.
2 DAC 5 ST3M557-3-10 59563 - Reid Products Inc.
-3-18 HT4027-3-18 ST3M557 A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of
(Active) Secondary Buy RNCC 5 RNVC 2 DAC 5 ST3M557-3-18 73197 - Hi-Shear Corporation (Active) Secondary
-4-3 11923-4-3 HT4027-4-3 ST3M557 A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip ST3M557-4-
-4-3 11923-4-3 HT4027-4-3 ST3M557 A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip ST3M557-4-
-4-2 HT4027-4-2 WC4027-4-2 ST3M557 A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion
-4-3 11923-4-3 HT4027-4-3 ST3M557 A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion
Restrictions 5305-01-513-9494
5305-01-513-9494 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-513-9494
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-513-9494
- US Air Force (FGGI)
- Effective Date:
- 1 Jun 2010
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Singapore (YJ01)
- Effective Date:
- 1 Oct 2012
- Canada (ZC01)
- Effective Date:
- 1 Apr 2007
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 2008
Approved Sources 5305-01-513-9494
- Part Number
- Manufacturer
- Status
- ST3M557-3-10
- Manufacturer
- 76301 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- WC4027-3-10
- 60516 - West Coast Aerospace, Inc. (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-3-10
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-3-10
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-3-10
- 0K6Z0 - Saturn Fasteners Inc (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-3-10
- 0ZC92 - Heartland Precision Fasteners Inc (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-3-10
- 17446 - Huck International, Inc (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-3-10
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-3-10
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-3-10
- U6683 - Linread Ltd (Active)
- Secondary Buy
- Secondary Buy
- HT4027-3-10
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- HT4027-3-10
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-3-10
- 007R1 - Twist Tite Mfg, Inc (Active)
- Secondary Buy
- Secondary Buy
- HT4027-3-10
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- HT4027-3-10
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- HT4027-3-10
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- ST3M557-3-10
- 58998 - Fastener Innovation Technology, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 10457107
- A486G - Nimikkeistokeskus Ncb Finland (Active)
- NATO Reference
- NATO Reference
- ST3M557
- 76301 - The Boeing Company (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5305-01-513-9494
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- End Item Identification [AGAV]
- Training Edge
- Fastener Length [AASB]
- 0.406 Inches Nominal
- Grip Diameter [AAUR]
- 0.1890 Inches Minimum And 0.1895 Inches Maximum
- Grip Length [ANEE]
- 0.427 Inches Minimum And 0.447 Inches Maximum
- Head Diameter [AASL]
- 0.2966 Inches Minimum And 0.3016 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Nickel Alloy 718 Overall
- Nominal Thread Diameter [AHYM]
- 0.190 Inches
- Internal Drive Style [ABQZ]
- High-Torque
- Material Document And Classification [MDCL]
- Ams 5662 Assn Std Single Material Response Overall
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 32
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.406 Inches Nominal
Weapon Systems (WSDC) 5305-01-513-9494
DLA Procurement Analysis 5305-01-513-9494
- Last Stock Position:
- 310 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-513-9494
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5305-01-513-9494
Freight Information 5305-01-513-9494
5305-01-513-9494 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-513-9494 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-513-9494 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-513-9494 is not classified as a special type of cargo when transported by water. 5305-01-513-9494 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-513-9494
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5305-01-513-9494 15 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A523V1547
- 30 Mar 2023
- Subscribe
- 120
- Subscribe
- Subscribe
- Subscribe
- SPE4A522V2441
- 21 Jul 2022
- Subscribe
- 85
- Subscribe
- Subscribe
- Subscribe
- SPE4A522V1781
- 21 Apr 2022
- Subscribe
- 36
- Subscribe
- Subscribe
- Subscribe
- SPE4A522V0845
- 23 Dec 2021
- Subscribe
- 85
- Subscribe
- Subscribe
- Subscribe
- SPE4A621V359R
- 20 May 2021
- Subscribe
- 93
- Subscribe
- Subscribe
- Subscribe
- SPE5EY19F5905
- 21 Dec 2018
- Subscribe
- 31
- Subscribe
- Subscribe
- Subscribe
- SPE5EY18F194G
- 18 Jun 2018
- Subscribe
- 384
- Subscribe
- Subscribe
- Subscribe
- SPE5E317V4606
- 13 Sep 2017
- Subscribe
- 318
- Subscribe
- Subscribe
- Subscribe
- SPE5E217V8474
- 23 Jun 2017
- Subscribe
- 128
- Subscribe
- Subscribe
- Subscribe
- SPE5E217V6156
- 03 Apr 2017
- Subscribe
- 184
- Subscribe
- Subscribe
- Subscribe
- SPE5E216V5985P00001
- 05 May 2016
- Subscribe
- 280
- Subscribe
- Subscribe
- Subscribe
- SPE5E215V0359
- 10 Oct 2014
- Subscribe
- 229
- Subscribe
- Subscribe
- Subscribe
- SPE5E214V1637
- 20 Nov 2013
- Subscribe
- 82
- Subscribe
- Subscribe
- Subscribe
- SPM5E213V3718
- 31 May 2013
- Subscribe
- 55
- Subscribe
- Subscribe
- Subscribe
- SPM5E213V1537
- 06 Feb 2013
- Subscribe
- 27
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5305-01-513-9494 April 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- R
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: