Premium Information is available for this item - Upgrade for $1 a day
5305-01-510-6782
Close Tolerance Screw
5305015106782 015106782 3M1169V4-30A TX1026V4-30A GS1006V4-30A 11827V4-30A
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
6
Marketplace 5305-01-510-6782
Request a Quotation from participating marketplace vendors
Restrictions 5305-01-510-6782
5305-01-510-6782 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-510-6782
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-510-6782
- US Navy (N9BZ)
- Effective Date:
- 1 Sep 2012
- Former MOE Rule:
- N1R5
- Supplementary Collaborators:
- GGKEGT
- Australia (ZA01)
- Effective Date:
- 1 Aug 2008
Approved Sources 5305-01-510-6782
- Part Number
- Manufacturer
- Status
- 3M1169V4-30A
- Manufacturer
- 76301 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- TX1026V4-30A
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- TX1026V4-30A
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- TX1026V4-30A
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- TX1026V4-30A
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- TX1026V4-30A
- C4293 - Fairchild Fasteners Europe - Vsd (Active)
- Secondary Buy
- Secondary Buy
- TX1026V4-30A
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- TX1026V4-30A
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- GS1006V4-30A
- 1EM77 - B & B Specialties, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 11827V4-30A
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- TX1026V4-30A
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- TX1026V4-30A
- 0PTK6 - Sps Technologies Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-510-6782
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 2.220 Inches Nominal
- Grip Diameter [AAUR]
- 0.249 Inches Nominal
- Grip Length [ANEE]
- 1.875 Inches Nominal
- Head Diameter [AASL]
- 0.470 Inches Minimum And 0.477 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material Document And Classification [MDCL]
- Nas4004 Assn Std Single Material Response Overall
- Material [MATT]
- Titanium Alloy Overall
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Internal Drive Style [ABQZ]
- Torx
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 28
- Spline Major Diameter [AAUJ]
- 0.220 Inches Minimum And 0.223 Inches Maximum
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.345 Inches Nominal
Weapon Systems (WSDC) 5305-01-510-6782
DLA Procurement Analysis 5305-01-510-6782
- Last Stock Position:
- 128 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-510-6782
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- QE
- Fighter Aircraft - First (F18 E/F)
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 5305-01-510-6782
Freight Information 5305-01-510-6782
5305-01-510-6782 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-510-6782 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-510-6782 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-510-6782 is not classified as a special type of cargo when transported by water. 5305-01-510-6782 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-510-6782
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5305-01-510-6782 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE5E218V8016
- 04 Jun 2018
- Subscribe
- 387
- Subscribe
- Subscribe
- Subscribe
- SPE5E215M0939
- 02 Feb 2015
- Subscribe
- 661
- Subscribe
- Subscribe
- Subscribe
- SPE5E214V5716
- 04 Apr 2014
- Subscribe
- 230
- Subscribe
- Subscribe
- Subscribe
- SPE5E214V1519
- 16 Nov 2013
- Subscribe
- 250
- Subscribe
- Subscribe
- Subscribe
- SPM5E213M4397
- 27 Aug 2013
- Subscribe
- 88
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5305-01-510-6782 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- N
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: