Premium Information is available for this item - Upgrade for $1 a day
5305-01-496-1416
Close Tolerance Screw
5305014961416 014961416 3M1262C4D37-6A TX1024C4D37-6A 11853C4D37-6A WC1262C4D37-6A
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
18
Marketplace 5305-01-496-1416
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-496-1416 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5305-01-496-1416 RQST NE Updated Every Day 5305-01-496-1416 RQST
Updated Every Day 5305-01-496-1416 RQST NE Related Documents 5305-01-496-1416 1+ Documents ( More...
Restrictions 5305-01-496-1416
5305-01-496-1416 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-496-1416
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-496-1416
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2012
- Former MOE Rule:
- N1R5
- Supplementary Collaborators:
- GGKE
Approved Sources 5305-01-496-1416
- Part Number
- Manufacturer
- Status
- 3M1262C4D37-6A
- Manufacturer
- 76301 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- TX1024C4D37-6A
- 06710 - Valley-Todeco, Inc. (Active)
- Primary Buy
- Primary Buy
- TX1024C4D37-6A
- 0K6Z0 - Saturn Fasteners Inc (Active)
- Primary Buy
- Primary Buy
- TX1024C4D37-6A
- 0ZC92 - Heartland Precision Fasteners Inc (Active)
- Primary Buy
- Primary Buy
- TX1024C4D37-6A
- 1EM77 - B & B Specialties Inc (Active)
- Primary Buy
- Primary Buy
- TX1024C4D37-6A
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- TX1024C4D37-6A
- 17446 - Huck International, Inc (Active)
- Primary Buy
- Primary Buy
- TX1024C4D37-6A
- 58998 - Fastener Innovation Technology, Inc. (Active)
- Primary Buy
- Primary Buy
- TX1024C4D37-6A
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- TX1024C4D37-6A
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- TX1024C4D37-6A
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- 11853C4D37-6A
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- TX1024C4D37-6A
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- TX1024C4D37-6A
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- TX1024C4D37-6A
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- TX1024C4D37-6A
- C4293 - Fairchild Fasteners Europe - Vsd (Active)
- Secondary Buy
- Secondary Buy
- TX1024C4D37-6A
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- TX1024C4D37-6A
- 1VSL7 - Houston Precision Fasteners I Lp (Active)
- Secondary Buy
- Secondary Buy
- TX1024C4D37-6A
- 4WL75 - Camcar Llc (Active)
- Secondary Buy
- Secondary Buy
- WC1262C4D37-6A
- 60516 - West Coast Aerospace, Inc. (Active)
- Secondary Buy
- Secondary Buy
- TX1024C4D37-6A
- 0PTK6 - Sps Technologies Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-496-1416
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- End Item Identification [AGAV]
- F18 E/F
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 2.673 Inches Minimum And 2.703 Inches Maximum
- Grip Diameter [AAUR]
- 0.2485 Inches Minimum And 0.2495 Inches Maximum
- Grip Length [ANEE]
- 2.303 Inches Minimum And 2.323 Inches Maximum
- Head Diameter [AASL]
- 0.358 Inches Minimum And 0.365 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Hole Diameter [AAUB]
- 0.076 Inches Minimum And 0.081 Inches Maximum
- Hole Quantity [ASXK]
- 1
- Hole Type [BQDM]
- Drilled
- Material [MATT]
- Nickel Alloy 718 Overall
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Internal Drive Style [ABQZ]
- Torx
- Material Document And Classification [MDCL]
- Bps-F-69 Mfr Ref Single Material Response Overall
- Part Name Assigned By Controlling Agency [CXCY]
- Bolt,100 Degree Reduced Dhead,Gear Drive Recess-Special Thread Length,Inconel 718 (125 Ksi Shear)
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 28
- Spline Major Diameter [AAUJ]
- 0.1540 Inches Minimum And 0.1560 Inches Maximum
- Spline Minor Diameter [AAUH]
- 0.1105 Inches Minimum And 0.1125 Inches Maximum
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.375 Inches Nominal
Weapon Systems (WSDC) 5305-01-496-1416
DLA Procurement Analysis 5305-01-496-1416
- Last Stock Position:
- 12 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-496-1416
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- QE
- Fighter Aircraft - First (F18 E/F)
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 5305-01-496-1416
Freight Information 5305-01-496-1416
5305-01-496-1416 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-496-1416 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5305-01-496-1416 is rated as a variable freight class when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-496-1416 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-496-1416 is not classified as a special type of cargo when transported by water. 5305-01-496-1416 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5305-01-496-1416 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: