Premium Information is available for this item - Upgrade for $1 a day
5305-01-491-0534
Externally Relieved Body Screw
5305014910534 014910534 5924811-101 MX1026 SEC5924811-101 5073-M07-F15
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING. View more Externally Relieved Body Screw
May 2023
2
Marketplace 5305-01-491-0534
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-491-0534 1+ Documents (More...)
MX1026 SCREW,EXTERNALLY RELIEVED BODY 47 EA NS Request Quotation Updated Every Day 5305-01-491-0534 RQST
NE Updated Every Day 5305-01-491-0534 RQST Updated Every Day 5305-01-491-0534 RQST NE Related Documents
Restrictions 5305-01-491-0534
5305-01-491-0534 is a Externally Relieved Body Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-491-0534
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-491-0534
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 5305-01-491-0534
- Part Number
- Manufacturer
- Status
- 5924811-101
- Manufacturer
- 53711 - Naval Sea Systems Command (Active)
- Primary Buy
- Primary Buy
- MX1026
- 04729 - Unicorp. (Active)
- Secondary Buy
- Secondary Buy
- SEC5924811-101
- 0MKW8 - Fastener Components Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 5073-M07-F15
- 04729 - Unicorp. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-491-0534
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Largest Bearing Surface Of Head To End Of First Diameter [AAWH]
- 0.865 Inches Minimum And 0.885 Inches Maximum
- Distance From Largest Bearing Surface Of Head To End Of Second Diameter [AAWJ]
- 1.470 Inches Minimum And 1.530 Inches Maximum
- Externally Relieved Body Diameter Quantity [CSNG]
- 2
- Fastener Length [AASB]
- 1.470 Inches Minimum And 1.530 Inches Maximum
- First Diameter From Head [AAWC]
- 0.225 Inches Minimum And 0.235 Inches Maximum
- Head Diameter [AASL]
- 0.615 Inches Minimum And 0.635 Inches Maximum
- Head Height [AASU]
- 0.240 Inches Minimum And 0.260 Inches Maximum
- Head Style [AASK]
- Flat Chamfer
- Material Document And Classification [MDCL]
- Qq-S-764;Class 7;Type A Fed Spec Single Material Response Overall
- Material [MATT]
- Steel Corrosion Resisting Overall
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Internal Drive Style [ABQZ]
- Hexagon
- Second Diameter From Head [AAWD]
- 0.214 Inches Minimum And 0.230 Inches Maximum
- Thread Series Designator [THSD]
- Unc
- Thread Quantity Per Inch [CMLP]
- 18
- Width Across Flats [ASDB]
- 0.177 Inches Minimum And 0.197 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Xxb000 Mil Spec Single Treatment Response Overall
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.365 Inches Minimum And 0.375 Inches Maximum
Weapon Systems (WSDC) 5305-01-491-0534
DLA Procurement Analysis 5305-01-491-0534
Management Data 5305-01-491-0534
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5305-01-491-0534
Freight Information 5305-01-491-0534
5305-01-491-0534 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-491-0534 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-491-0534 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-491-0534 is not classified as a special type of cargo when transported by water. 5305-01-491-0534 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-491-0534
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5305-01-491-0534 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: