Premium Information is available for this item - Upgrade for $1 a day
5305-01-479-0941
Hexagon Head Cap Screw
5305014790941 014790941 128186 8HB209
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. Excludes BOLT,MACHINE; BOLT,EXTERNALLY RELIEVED BODY; BOLT,INTERNAL WRENCHING; and SCREW,CAP,SOCKET HEAD. View more Hexagon Head Cap Screw
November 2023
12
Marketplace 5305-01-479-0941
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-479-0941 5+ Documents (More...)
United States (US) 4. 5305-01-479-0941 Marketplace Restrictions Approved Sources Datasheet Management
SCREW,CAP,HEXAGON HEAD 3 EA NS Request Quotation Updated Every Day 5305-01-479-0941 RQST NE Updated
https//www.nsnlookup.com /fsg-53/fsc-5330/us 5330-01-317-0497 Gasket 5330013170497 013170497,128186-1 128186
Hexagon Head Cap Screw 5305014790941,128186 01-305-9218Gasket5330013059218 013059218 128186 https
https//www.nsnlookup.com /fsg-53/fsc-5330/us 5330-01-305-9215 Gasket 5330013059215 013059215,128186-2 128186
Every Day 5330-01-305-9215 RQST NE Restrictions https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305-01-479-0941
https//www.nsnlookup.com /fsg-53/fsc-5330/us 5330-01-305-9216 Gasket 5330013059216 013059216,128186-3 128186
Restrictions Approved Sources Datasheet Management https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305-01-479-0941
https//www.nsnlookup.com /fsg-53/fsc-5330/us 5330-01-305-9217 Gasket 5330013059217 013059217,128186-4 128186
Every Day 5330-01-305-9217 RQST NE Restrictions https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305-01-479-0941
Restrictions 5305-01-479-0941
5305-01-479-0941 is a Hexagon Head Cap Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-479-0941
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-479-0941
- US Army (A919)
- Effective Date:
- 1 Jun 2009
- Supplementary Receivers:
- AZ
- US Air Force (FGGI)
- Effective Date:
- 1 Feb 2010
- US Marine Corps (MC47)
- Effective Date:
- 1 Nov 2008
- Former MOE Rule:
- MM85
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2009
- Supplementary Collaborators:
- HD
- Canada (ZC01)
- Effective Date:
- 1 May 2014
Approved Sources 5305-01-479-0941
- Part Number
- Manufacturer
- Status
- 128186
- Manufacturer
- 52304 - Dana Commercial Vehicle Products, (Active)
- Primary Buy
- Primary Buy
- 8HB209
- 75Q65 - Oshkosh Defense Llc (Active)
- Secondary Buy
- Secondary Buy
- 8HB209
- 45152 - Oshkosh Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-479-0941
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Extended Washer Diameter [AATC]
- 0.384 Inches Minimum And 0.414 Inches Maximum
- Fastener Length [AASB]
- 0.720 Inches Minimum And 0.750 Inches Maximum
- Head Height [AASU]
- 0.120 Inches Nominal
- Head Style [AASK]
- Hexagon Extended Washer
- End Item Identification [AGAV]
- 2320-01-465-2174; Mrap - Cougar Iss 1.0; Mrap - Cougar Iss 1.5
- Part Name Assigned By Controlling Agency [CXCY]
- Installation-10 Screw Self Tap
- Width Between Flats [AATB]
- 0.305 Inches Minimum And 0.312 Inches Maximum
Weapon Systems (WSDC) 5305-01-479-0941
DLA Procurement Analysis 5305-01-479-0941
- Last Stock Position:
- 1605 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-479-0941
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5305-01-479-0941
Freight Information 5305-01-479-0941
5305-01-479-0941 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-479-0941 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-479-0941 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5305-01-479-0941 is not classified as a special type of cargo when transported by water. 5305-01-479-0941 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-479-0941
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- 27.0" H x 4.0" W x 1.0" L
- --
- --
- Physical Protection
- Any Suitable Process
- 27.0" H x 4.0" W x 1.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5305-01-479-0941 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: