Premium Information is available for this item - Upgrade for $1 a day
5305-01-477-5966
Close Tolerance Screw
5305014775966 014775966 TX1027D5-8A 3M1170D5-8A 11845D5-8A 11825D5-8A 3M1170 REV.K
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
9
Marketplace 5305-01-477-5966
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-477-5966 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5305-01-477-5966 RQST NE Updated Every Day 5305-01-477-5966 RQST
Updated Every Day 5305-01-477-5966 RQST NE Related Documents 5305-01-477-5966 1+ Documents ( More...
Restrictions 5305-01-477-5966
5305-01-477-5966 is a Close Tolerance Screw Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5305-01-477-5966
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
Approved Sources 5305-01-477-5966
- Part Number
- Manufacturer
- Status
- TX1027D5-8A
- Manufacturer
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- 3M1170D5-8A
- 17446 - Huck International, Inc (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- 76301 - The Boeing Company (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- 0ZC92 - Heartland Precision Fasteners Inc (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- C4293 - Fairchild Fasteners Europe - Vsd (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 11845D5-8A
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- 60516 - West Coast Aerospace, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 11825D5-8A
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- 1EM77 - B & B Specialties Inc (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- 1VSL7 - Houston Precision Fasteners I Lp (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- 58998 - Fastener Innovation Technology, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 3M1170D5-8A
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- TX1027D5-8A
- 06725 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 3M1170 REV.K
- 76301 - The Boeing Company (Active)
- Informational Drawing
- Informational Drawing
Weapon Systems (WSDC) 5305-01-477-5966
DLA Procurement Analysis 5305-01-477-5966
- Last Stock Position:
- 43 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-477-5966
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- QF
- Fighter Aircraft (F18 E/F)
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 5305-01-477-5966
Freight Information 5305-01-477-5966
5305-01-477-5966 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-477-5966 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-477-5966 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5305-01-477-5966 is not classified as a special type of cargo when transported by water. 5305-01-477-5966 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-477-5966
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5305-01-477-5966 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A622P2665
- 27 Oct 2021
- Subscribe
- 7
- Subscribe
- Subscribe
- Subscribe
- SPE4A622V2150
- 20 Oct 2021
- Subscribe
- 67
- Subscribe
- Subscribe
- Subscribe
- SPE5E218V9125
- 03 Jul 2018
- Subscribe
- 35
- Subscribe
- Subscribe
- Subscribe
- SPE5E216V0574
- 22 Oct 2015
- Subscribe
- 43
- Subscribe
- Subscribe
- Subscribe
- SPE5E215V5500
- 22 Apr 2015
- Subscribe
- 43
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5305-01-477-5966 October 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: