Premium Information is available for this item - Upgrade for $1 a day
5305-01-462-2667
Close Tolerance Screw
5305014622667 014622667 3M1034C6-13-51 HT4075D6-13-51 WC4075C6-13-51 11839C6-13-51
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
14
Marketplace 5305-01-462-2667
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-462-2667 5+ Documents (More...)
Close Tolerance Screw 5305014622667 014622667 HT4075D6-13-51 WC4075C6-13-51 11839C6-13-51 A SCREW
MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded (Active) Primary Buy RNCC 3 RNVC 2 DAC 5 HT4075D6-13-51
Close Tolerance Screw 5305014622667 014622667 5305-01-462-2667 5305014622667 014622667 is a screw
Close Tolerance Screw 5305014622667 014622667 5305-01-462-2667 5305014622667 014622667 is a screw
Close Tolerance Screw 5305014622667 014622667 5305-01-462-2667 5305014622667 014622667 is a screw
Close Tolerance Screw 5305014622667 014622667 5305-01-462-2667 5305014622667 014622667 is a screw
Restrictions 5305-01-462-2667
5305-01-462-2667 is a Close Tolerance Screw that does not have a nuclear hardened feature, but does have another critical feature or features such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-462-2667
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-462-2667
- US Navy (N9BZ)
- Effective Date:
- 1 Sep 2012
- Former MOE Rule:
- N1R5
- Supplementary Collaborators:
- GGKEGT
Approved Sources 5305-01-462-2667
- Part Number
- Manufacturer
- Status
- 3M1034C6-13-51
- Manufacturer
- 06710 - Valley-Todeco, Inc. (Active)
- Primary Buy
- Primary Buy
- HT4075D6-13-51
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- HT4075D6-13-51
- 17446 - Huck International, Inc. (Active)
- Primary Buy
- Primary Buy
- HT4075D6-13-51
- 80539 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- HT4075D6-13-51
- 56878 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- 3M1034C6-13-51
- 58998 - Fastener Innovation Technology, Inc. (Active)
- Primary Buy
- Primary Buy
- HT4075D6-13-51
- 06725 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- 3M1034C6-13-51
- 0ZC92 - Heartland Precision Fasteners Inc (Active)
- Primary Buy
- Primary Buy
- HT4075D6-13-51
- 27624 - Sps Technologies Llc (Active)
- Primary Buy
- Primary Buy
- 3M1034C6-13-51
- 76301 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- HT4075D6-13-51
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- WC4075C6-13-51
- 60516 - West Coast Aerospace, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 11839C6-13-51
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- 3M1034C6-13-51
- 1VSL7 - Houston Precision Fasteners I Lp (Active)
- Secondary Buy
- Secondary Buy
- HT4075D6-13-51
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- HT4075D6-13-51
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- HT4075D6-13-51
- 0PTK6 - Sps Technologies Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-462-2667
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Criticality Code Justification [CRTL]
- Agav
- End Item Identification [AGAV]
- Structural Section; F18 Aircraft
- Fastener Length [AASB]
- 1.438 Inches Minimum And 1.468 Inches Maximum
- Grip Diameter [AAUR]
- 0.3740 Inches Minimum And 0.3745 Inches Maximum
- Grip Length [ANEE]
- 0.812 Inches Nominal
- Head Diameter [AASL]
- 0.752 Inches Minimum And 0.762 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Steel Comp Xm-13 Overall
- Nominal Thread Diameter [AHYM]
- 0.3750 Inches
- Internal Drive Style [ABQZ]
- High-Torque
- Material Document And Classification [MDCL]
- Ams5629, Ph13-8Mo Assn Std Single Material Response Overall
- Part Name Assigned By Controlling Agency [CXCY]
- Screw-Close Tolerance, 100 Degree Countersunk, Dovetail Slot, Sealant Injection
- Special Features [FEAT]
- Tapped Hole In The Head 0.1380-32 Unjc-3B Threads; Distance From Top Of Head To Injection Port 0.510 In.; Injection Port 0.120 Long, 0.060 Wide
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 24
- Surface Treatment Document And Classification [STDC]
- Ams-Qq-P-35 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.641 Inches Nominal
Weapon Systems (WSDC) 5305-01-462-2667
DLA Procurement Analysis 5305-01-462-2667
- Last Stock Position:
- 12 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-462-2667
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- QE
- Fighter Aircraft - First (F18 E/F)
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
NATO Stock Numbers Related to 5305-01-462-2667
Freight Information 5305-01-462-2667
5305-01-462-2667 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-462-2667 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-462-2667 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-462-2667 is not classified as a special type of cargo when transported by water. 5305-01-462-2667 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5305-01-462-2667 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: