Premium Information is available for this item - Upgrade for $1 a day
5305-01-445-4072
Externally Relieved Body Screw
5305014454072 014454072 704-.750-SS-12 LO1505 LL-HX3-5234 11-4914-5 PO004454072 408-SS-20
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is No. 0 (0.060 IN.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below No. 10 (0.190 IN.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also BOLT, EXTERNALLY RELIEVED BODY and BOLT, INTERNAL WRENCHING. View more Externally Relieved Body Screw
November 2023
5
Marketplace 5305-01-445-4072
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-445-4072 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5305-01-445-4072 RQST NE Updated Every Day 5305-01-445-4072 RQST
Updated Every Day 5305-01-445-4072 RQST NE Related Documents 5305-01-445-4072 1+ Documents ( More...
Restrictions 5305-01-445-4072
5305-01-445-4072 is a Externally Relieved Body Screw that is specifically designed to be or selected as being nuclear hard. In addition it has other critical features such as tolerance, fit restrictions or application.Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-445-4072
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-445-4072
- US Air Force (FXGI)
- Effective Date:
- 17 Oct 2010
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Supplementary Collaborators:
- HDHX
Approved Sources 5305-01-445-4072
- Part Number
- Manufacturer
- Status
- 704-.750-SS-12
- Manufacturer
- 51506 - Accurate Screw Machine Corp (Active)
- Incomplete Reference
- Incomplete Reference
- LO1505
- 16236 - Dla Land And Maritime (Active)
- Secondary Buy
- Secondary Buy
- LL-HX3-5234
- 14153 - Defense Logistics Agency (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 11-4914-5
- 27192 - Drs Naval Power Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- PO004454072
- 14153 - Defense Logistics Agency (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 408-SS-20
- 55566 - Matthew Warren, Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-445-4072
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Largest Bearing Surface Of Head To End Of First Diameter [AAWH]
- 0.428 Inches Minimum And 0.448 Inches Maximum
- Criticality Code Justification [CRTL]
- Zzzy
- Departure From Cited Document [ZZZW]
- As Modified By Material
- Externally Relieved Body Diameter Quantity [CSNG]
- 1
- Fastener Length [AASB]
- 0.735 Inches Minimum And 0.765 Inches Maximum
- First Diameter From Head [AAWC]
- 0.115 Inches Minimum And 0.125 Inches Maximum
- Head Diameter [AASL]
- 0.312 Inches Minimum And 0.327 Inches Maximum
- Head Height [AASU]
- 0.302 Inches Minimum And 0.322 Inches Maximum
- Head Style [AASK]
- Knurled No. 4
- Material Document And Classification [MDCL]
- Qq-S-764 Fed Spec Single Material Response Overall
- Material [MATT]
- Steel Comp 303 Overall
- Nominal Thread Diameter [AHYM]
- 0.164 Inches
- Internal Drive Style [ABQZ]
- Slot
- Reference Number Differentiating Characteristics [ZZZY]
- As Differentiated By Material Which Must Conform To Ships Parts Control Center Special Quality Control Provisions
- Special Features [FEAT]
- Item Must Comply With Requirements Of Defense Supply Center Columbus Production Standard No. Lo1505
- Thread Series Designator [THSD]
- Unc
- Thread Quantity Per Inch [CMLP]
- 32
- Special Test Features [SPCL]
- Special Quality Control Testing
- Surface Treatment [SFTT]
- Passivate Overall
- Test Data Document [TEST]
- 81349-Mil-P-23199 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.203 Inches Minimum And 0.218 Inches Maximum
Weapon Systems (WSDC) 5305-01-445-4072
DLA Procurement Analysis 5305-01-445-4072
- Last Stock Position:
- 259 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-445-4072
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5305-01-445-4072
Freight Information 5305-01-445-4072
5305-01-445-4072 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-445-4072 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-445-4072 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5305-01-445-4072 is not classified as a special type of cargo when transported by water. 5305-01-445-4072 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-445-4072
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Special Requirements
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Special requirement – See specific instructions or drawings provided
- --
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 5305-01-445-4072 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: