Premium Information is available for this item - Upgrade for $1 a day
5305-01-411-3898
Hexagon Head Cap Screw
5305014113898 014113898 MS90726-8
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. Excludes BOLT,MACHINE; BOLT,EXTERNALLY RELIEVED BODY; BOLT,INTERNAL WRENCHING; and SCREW,CAP,SOCKET HEAD. View more Hexagon Head Cap Screw
November 2023
22
Marketplace 5305-01-411-3898
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-411-3898 5+ Documents (More...)
MS90726-8 SCREW 25 EA NS Request Quotation MS90726-8 SCREW 50 EA NS Request Quotation Subscribe to View
MS90726-8 SCREW,CAP,HEXAGON HEAD 55 EA NS Request Quotation Subscribe to View Vendor Details...
MS90726-8 SCREW,CAP,HEXAGON HEAD 10 HD NS Request Quotation Subscribe to View Vendor Details...
MS90726-8 SCREW,CAP,HEXAGON HEAD 55 EA NS Request Quotation Subscribe to View Vendor Details...
MS90726-8 SCREW,CAP,HEXAGON HEAD 55 EA NS Request Quotation Subscribe to View Vendor Details... 181568
HEXAGON HEAD 37 EA NS Request Quotation C4524-1628-2 SCREW,CAP,HEXAGON HEAD 7 EA NS Request Quotation MS90726-8
MS90726-8 SCREW,CAP,HEXAGON HEAD 55 EA NS Request Quotation Subscribe to View Vendor Details...
CAP,HEXAGON HEAD 37 EA NS Request Quotation FFS85 SCREW,CAP,HEXAGON HEAD 2 EA NS Request Quotation MS90726-8
MS90726-8 SCREW,CAP,HEXAGON HEAD 55 EA NS Request Quotation Subscribe to View Vendor Details... 181568
HEXAGON HEAD 2 EA NS Request Quotation FF-S-85 SCREW,CAP,HEXAGON HEAD 37 EA NS Request Quotation MS90726-8
Restrictions 5305-01-411-3898
5305-01-411-3898 is a Hexagon Head Cap Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-411-3898
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-411-3898
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GGGT
- Spain (YB01)
- Effective Date:
- 1 Jun 2003
- Singapore (YJ01)
- Effective Date:
- 1 Feb 1997
- Australia (ZA01)
- Effective Date:
- 1 May 1997
- Belgium (ZB01)
- Effective Date:
- 1 Jul 1996
- New Zealand (ZE01)
- Effective Date:
- 1 Feb 1997
- France (ZF01)
- Effective Date:
- 1 May 2015
- Germany (ZG01)
- Effective Date:
- 1 Jan 2015
- United Kingdom (ZK01)
- Effective Date:
- 14 May 1996
- Portugal (ZP01)
- Effective Date:
- 1 Feb 1997
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 5305-01-411-3898
- Part Number
- Manufacturer
- Status
- MS90726-8
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- MS90726-8
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-411-3898
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Fastener Length [AASB]
- 1.000 Inches Nominal
- Hardness Rating [CQFM]
- 32.0 Rockwell C Minimum Overall And 38.0 Rockwell C Maximum Overall
- Head Height [AASU]
- 0.150 Inches Minimum And 0.163 Inches Maximum
- Head Style [AASK]
- Hexagon
- Material Document And Classification [MDCL]
- Sae J429 Gr5 Assn Std Single Material Response Overall
- Material [MATT]
- Steel Overall
- Minimum Tensile Strength [CQBC]
- 150000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Thread Series Designator [THSD]
- Unf
- Thread Quantity Per Inch [CMLP]
- 28
- Width Between Flats [AATB]
- 0.428 Inches Minimum And 0.438 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Astm B633, Ty 2, Sc 3 Assn Std All Treatment Responses Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.938 Inches Minimum And 1.000 Inches Maximum
Weapon Systems (WSDC) 5305-01-411-3898
DLA Procurement Analysis 5305-01-411-3898
- Last Stock Position:
- 3910 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-411-3898
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5305-01-411-3898
Freight Information 5305-01-411-3898
5305-01-411-3898 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-411-3898 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-411-3898 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5305-01-411-3898 is not classified as a special type of cargo when transported by water. 5305-01-411-3898 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-411-3898
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5305-01-411-3898 1 Records
Contracting Technical Data File (CTDF) 5305-01-411-3898 October 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: