Premium Information is available for this item - Upgrade for $1 a day
5305-01-398-6338
Close Tolerance Screw
5305013986338 013986338 DF33003-12D37P PBF1420-12D37P AIC1653-12D37P 03A098-12D37P MB209-12D37 123709-12D37P VCJ0001-12D37P SII1188-12D37P VS3319-12D37P
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
11
Marketplace 5305-01-398-6338
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-398-6338 5+ Documents (More...)
Close Tolerance Screw 5305013986338 013986338 5305-01-398-6338 5305013986338 013986338 is a screw
Close Tolerance Screw 5305013986338 013986338 5305-01-398-6338 5305013986338 013986338 is a screw
/fsg-47/fsc-4730/uk
Close Tolerance Screw 5305013986338 013986338 5305-01-398-6338 5305013986338 013986338 is a screw
Close Tolerance Screw 5305013986338 013986338 5305-01-398-6338 5305013986338 013986338 is a screw
Close Tolerance Screw 5305013986338 013986338 5305-01-398-6338 5305013986338 013986338 is a screw
Restrictions 5305-01-398-6338
5305-01-398-6338 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-398-6338
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-398-6338
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5305-01-398-6338
- Part Number
- Manufacturer
- Status
- PBF1420-12D37P
- Manufacturer
- 27624 - Sps Technologies Llc (Active)
- Primary Buy
- Primary Buy
- AIC1653-12D37P
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 03A098-12D37P
- 17446 - Huck International, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 03A098-12D37P
- 1W025 - Northrop Grumman Systems Corp (Active)
- Secondary Buy
- Secondary Buy
- 03A098-12D37P
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- MB209-12D37
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- 03A098-12D37P
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- 123709-12D37P
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 03A098-12D37P
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- VCJ0001-12D37P
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 03A098-12D37P
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 03A098-12D37P
- 57928 - Sonic Industries, Inc. (Active)
- Secondary Buy
- Secondary Buy
- SII1188-12D37P
- 57928 - Sonic Industries, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 03A098-12D37P
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- VS3319-12D37P
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- 03A098-12D37P
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- MB209-12D37
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- 03A098-12D37P
- 9N513 - Voi-Shan/Chatsworth (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- VS3319-12D37P
- 9N513 - Voi-Shan/Chatsworth (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- DF33003-12D37P
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- DF33003-12D37P
- 17446 - Huck International, Inc. (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5305-01-398-6338
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 3.072 Inches Minimum First Hole And 3.113 Inches Maximum First Hole
- Fastener Length [AASB]
- 3.211 Inches Minimum And 3.241 Inches Maximum
- Grip Diameter [AAUR]
- 0.7480 Inches Minimum And 0.7490 Inches Maximum
- Grip Length [ANEE]
- 2.297 Inches Minimum And 2.327 Inches Maximum
- Head Height [AASU]
- 0.390 Inches Minimum And 0.410 Inches Maximum
- Head Minor Diameter [AAZH]
- 1.096 Inches Nominal
- Head Style [AASK]
- Spline Drive Shear Head
- Material [MATT]
- Nickel Alloy 718 Overall
- Minimum Tensile Strength [CQBC]
- 125000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.750 Inches
- Internal Drive Style [ABQZ]
- W/O Internal Drive
- Material Document And Classification [MDCL]
- Ams 5662 Fed Spec Single Material Response Overall
- Shank Unthreaded Hole Diameter [AAWB]
- 0.141 Inches Minimum First Hole And 0.146 Inches Maximum First Hole
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 16
- Surface Finish [CSYM]
- 32.0 Microinches Overall
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Tyii,Cl2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.914 Inches Nominal
DLA Procurement Analysis 5305-01-398-6338
Management Data 5305-01-398-6338
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5305-01-398-6338
Freight Information 5305-01-398-6338
5305-01-398-6338 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-398-6338 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-398-6338 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-398-6338 is not classified as a special type of cargo when transported by water. 5305-01-398-6338 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-398-6338
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5305-01-398-6338 October 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: