Premium Information is available for this item - Upgrade for $1 a day
5305-01-376-4766
Panel Screw Assembly
5305013764766 013764766 FSC9001P4-4B A320C078-101
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded. View more Panel Screw Assembly
May 2023
3
Marketplace 5305-01-376-4766
Request a Quotation from participating marketplace vendors
Restrictions 5305-01-376-4766
5305-01-376-4766 is a Panel Screw Assembly that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-376-4766
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-376-4766
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5305-01-376-4766
- Part Number
- Manufacturer
- Status
- A320C078-101
- Manufacturer
- 88818 - Kearfott Corporation (Active)
- Primary Buy
- Primary Buy
- FSC9001P4-4B
- 58998 - Fastener Innovation Technology, Inc. (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5305-01-376-4766
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Fastener Length [AASB]
- 1.139 Inches Nominal
- Head Diameter [AASL]
- 0.516 Inches Minimum And 0.546 Inches Maximum
- Head Height [AASU]
- 0.515 Inches Minimum And 0.545 Inches Maximum
- Head Style [AASK]
- Knurled No. 5
- Material Document And Classification [MDCL]
- Qq-A-225/8, T6 Fed Spec Single Material Response Head
- Material Document And Classification [MDCL]
- Qq-A-225/8, T6 Fed Spec Single Material Response Stand-Off
- Material [MATT]
- Aluminum Alloy 6061 Head
- Material [MATT]
- Aluminum Alloy 6061 Stand-Off
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Internal Drive Style [ABQZ]
- Cross Recess Type 1
- Material Accommodated Thickness [AGSM]
- 0.032 Inches Minimum And 0.092 Inches Maximum
- Thread Series Designator [THSD]
- Unf
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625, Type 1, Class 1 Mil Spec Single Treatment Response Stand-Off
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625, Type 1, Class 1 Mil Spec Single Treatment Response Head
- Surface Treatment [SFTT]
- Anodize Head
- Surface Treatment [SFTT]
- Anodize Stand-Off
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Quantity Per Inch [CMLP]
- 28
DLA Procurement Analysis 5305-01-376-4766
Management Data 5305-01-376-4766
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5305-01-376-4766
Freight Information 5305-01-376-4766
5305-01-376-4766 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-376-4766 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-376-4766 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-376-4766 is not classified as a special type of cargo when transported by water. 5305-01-376-4766 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5305-01-376-4766 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: