Premium Information is available for this item - Upgrade for $1 a day
5305-01-374-6357
Close Tolerance Screw
5305013746357 013746357 NAS1994-9
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
January 2023
8
Marketplace 5305-01-374-6357
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-374-6357 1+ Documents (More...)
NE Updated Every Day 5305-01-374-6357 RQST Updated Every Day 5305-01-374-6357 RQST NE Related Documents
Updated Every Day 5305-01-374-6357 RQST NE Updated Every Day 5305-01-374-6357 RQST Updated Every Day
Restrictions 5305-01-374-6357
5305-01-374-6357 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5305-01-374-6357
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-374-6357
- Brazil (YA01)
- Effective Date:
- 1 Jan 2011
- Singapore (YJ01)
- Effective Date:
- 1 Aug 1993
Approved Sources 5305-01-374-6357
- Part Number
- Manufacturer
- Status
- NAS1994-9
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 5305-01-374-6357
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 100.0 Degrees Nominal
- Fastener Length [AASB]
- 0.972 Inches Minimum And 1.002 Inches Maximum
- Grip Diameter [AAUR]
- 0.2485 Inches Minimum And 0.2495 Inches Maximum
- Grip Length [ANEE]
- 0.552 Inches Minimum And 0.572 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material Document And Classification [MDCL]
- Mil-S-5626 Mil Spec 1St Material Response Overall Or Mil-S-5000 Mil Spec 2Nd Material Response Overall Or Mil-S-6049 Mil Spec 3Rd Material Response Overall
- Material [MATT]
- Steel Comp 4140 Overall Or Steel Comp 4340 Overall Or Steel Comp 8740 Overall
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Thread Series Designator [THSD]
- Unjf
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.425 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 28
Similar Supply Items to 5305-01-374-6357
Freight Information 5305-01-374-6357
5305-01-374-6357 has freight characteristics managed by Belgium.. 5305-01-374-6357 has a variance between NMFC and UFC when transported by rail and the description should be consulted.