Premium Information is available for this item - Upgrade for $1 a day
5305-01-371-5140
Close Tolerance Screw
5305013715140 013715140 MIL-B-87114 NAS1580C4T16DP
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
January 2023
2
Marketplace 5305-01-371-5140
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-371-5140 5+ Documents (More...)
RQST NE Updated Every Day 5305-01-371-5140 RQST Updated Every Day 5305-01-371-5140 RQST NE Related Documents
5305-01-371-5140 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305-01-371-5140
a day Upgrade your Account Upgrade 5305-01-382-7504Close Tolerance Screw5305013827504 013827504 MIL-B-87114
a day Upgrade your Account Upgrade 5305-01-383-4260Close Tolerance Screw5305013834260 013834260 MIL-B-87114
Close Tolerance Screw 5305013715140 013715140 a day Upgrade your Account Upgrade 5305-01-371-5140Close
Tolerance Screw5305013715140 013715140 MIL-B-87114 a day Upgrade your Account Upgrade 5305-01-369-3328Close
a day Upgrade your Account Upgrade 5305-01-382-7504Close Tolerance Screw5305013827504 013827504 MIL-B-87114
Close Tolerance Screw 5305013715140 013715140 a day Upgrade your Account Upgrade 5305-01-371-5140Close
to enable JavaScript in your web browser . 5305-01-364-8325Machine Screw5305013648325 013648325 MIL-B-87114
Close Tolerance Screw 5305013715140 013715140 to enable JavaScript in your web browser . 5305-01
Restrictions 5305-01-371-5140
5305-01-371-5140 is a Close Tolerance Screw Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-371-5140
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-371-5140
- US Air Force (FBB5)
- Effective Date:
- 1 Nov 2004
- Former MOE Rule:
- FXKZ
Approved Sources 5305-01-371-5140
- Part Number
- Manufacturer
- Status
- NAS1580C4T16DP
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- MIL-B-87114
- 81349 - Military Specifications (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5305-01-371-5140
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 1.297 Inches Nominal First Hole
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 100.0 Degrees Maximum
- Fastener Length [AASB]
- 1.388 Inches Minimum And 1.418 Inches Maximum
- Grip Diameter [AAUR]
- 0.2485 Inches Minimum And 0.2495 Inches Maximum
- Grip Length [ANEE]
- 0.990 Inches Minimum And 1.110 Inches Maximum
- Hardness Rating [CQFM]
- 36.0 Rockwell C Minimum Overall And 40.0 Rockwell C Maximum Overall
- Head Diameter [AASL]
- 0.464 Inches Minimum And 0.507 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Iron Alloy 660 Overall
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Internal Drive Style [ABQZ]
- Offset Cruciform (Torque Set)
- Material Document And Classification [MDCL]
- Ams 5731 Assn Std Single Material Response Overall
- Shank Unthreaded Hole Diameter [AAWB]
- 0.076 Inches Minimum First Hole And 0.086 Inches Maximum First Hole
- Thread Series Designator [THSD]
- Unjf
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty,Cl2 Assn Std All Treatment Responses Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.403 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 28
Management Data 5305-01-371-5140
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Nov 2004
- Department of the Air Force (DF)
- EA
- Subscribe
- EA
Air Force
- Budget:
- S
- 57X3010 - Aircraft Replenishment Spares
- Aggregation Code:
- BA
- C-17 PROGRAM
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5305-01-371-5140
Freight Information 5305-01-371-5140
5305-01-371-5140 has freight characteristics.. 5305-01-371-5140 has a variance between NMFC and UFC when transported by rail and the description should be consulted.