Premium Information is available for this item - Upgrade for $1 a day
5305-01-360-6068
Panel Screw Assembly
5305013606068 013606068 21T02-2-08-1AA
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded. View more Panel Screw Assembly
May 2023
3
Marketplace 5305-01-360-6068
Request a Quotation from participating marketplace vendors
Restrictions 5305-01-360-6068
5305-01-360-6068 is a Panel Screw Assembly that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
End Users 5305-01-360-6068
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
Approved Sources 5305-01-360-6068
- Part Number
- Manufacturer
- Status
- 21T02-2-08-1AA
- Manufacturer
- 71286 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 5305-01-360-6068
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Fastener Length [AASB]
- 0.480 Inches Minimum And 0.520 Inches Maximum
- Head Height [AASU]
- 0.170 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-A-225/9 Fed Spec Single Material Response Bearing Surface Of Head
- Material [MATT]
- Aluminum Alloy 7075 Bearing Surface Of Headsteel Comp 302 Threads Or Steel Comp 303 Threads Or Steel Comp 303Se Threads Or Steel Comp 304 Threads Or Steel Comp 304L Threads Or Steel Comp 305 Threads Or Steel Comp 309 Threads Or Steel Comp 310 Threads Or Steel Comp 316 Threads Or Steel Comp 316L Threads Or Steel Comp 317 Threads Or Steel Comp 321 Threads Or Steel Comp 321 Threads Or Steel Comp 322 Threads Or Steel Comp 324 Threads Or Steel Comp 347 Threads
- Nominal Thread Diameter [AHYM]
- 0.164 Inches
- Internal Drive Style [ABQZ]
- Cross Recess Type 1
- Material Accommodated Thickness [AGSM]
- 0.480 Inches Minimum And 0.520 Inches Maximum
- Thread Series Designator [THSD]
- Unc
- Surface Treatment Document And Classification [STDC]
- Mil-C-5541 Cl3 Mil Spec Single Treatment Response Bearing Surface Of Headqq-P-35 Fed Spec Single Treatment Response Threads
- Surface Treatment [SFTT]
- Chromate Bearing Surface Of Headpassivate Threads
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.295 Inches Minimum And 0.325 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 32
DLA Procurement Analysis 5305-01-360-6068
Management Data 5305-01-360-6068
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5305-01-360-6068
Freight Information 5305-01-360-6068
5305-01-360-6068 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-360-6068 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-360-6068 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-360-6068 is not classified as a special type of cargo when transported by water. 5305-01-360-6068 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5305-01-360-6068 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: