Premium Information is available for this item - Upgrade for $1 a day
5305-01-353-6300
Machine Screw
5305013536300 013536300 DIN 84-M3 X 10 DIN84-M3X10 M3X10DIN84A2PAS S BN650 M3X10 M3X10DIN84A2PASS DIN84 M3X10
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD. View more Machine Screw
August 2023
17
Marketplace 5305-01-353-6300
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-353-6300 5+ Documents (More...)
-CUZN N08115 1357131209110642 DIN84-M3X10-MS DIN84M3X10MS M3X10DIN84-CUZN M3X10DIN84MS 0808351476589
1357131209110642 D5004 - Logistikkommando Der Bundeswehr Bw (Obsolete) Canceled/Obsolete RNCC 5 RNVC 9 DAC 9 DIN84-M3X10
-CUZN-E1P DIN84M3X10MSE1P DIN84M3X10MSGALNI3 M3X10DIN84-CUZN-E1P DIN84-M3X10-MS-E1P M3X10DIN84MSGALNI3
CUZN-E1P D8286 - Din Deutsches Institut Fuer Normung (Active) Canceled/Obsolete RNCC 5 RNVC 9 DAC 9 DIN84-M3X10
-CUZN-E2P AM3X10DIN84MS58F44GALNI5 DIN84-M3X10-MS-E2P DIN84M3X10MSE2P DIN84M3X10MSGALNI5 M3X10DIN84
AM3X10DIN84MS58F44GALNI5 D8286 - Din Deutsches Institut Fuer Normung (Active) Canceled/Obsolete RNCC 5 RNVC 9 DAC 9 DIN84-M3X10
Restrictions 5305-01-353-6300
5305-01-353-6300 is a Machine Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-353-6300
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-353-6300
- US Army (A919)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- CL
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- HD
- Spain (YB01)
- Effective Date:
- 1 May 1997
- Malaysia (YW01)
- Effective Date:
- 1 Sep 2005
- Australia (ZA01)
- Effective Date:
- 1 Jul 1999
- Germany (ZG01)
- Effective Date:
- 1 Jul 2014
- Greece (ZU01)
- Effective Date:
- 1 Apr 2006
- Turkey (ZW01)
- Effective Date:
- 1 Feb 2004
Approved Sources 5305-01-353-6300
- Part Number
- Manufacturer
- Status
- M3X10DIN84A2PASS
- Manufacturer
- 6Y603 - Fabory Usa Ltd. (Active)
- Primary Buy
- Primary Buy
- DIN84 M3X10
- 21969 - Zelenda Machine And Tools Corp (Obsolete)
- Original Design
- Original Design
- DIN 84-M3 X 10
- D8286 - Din Deutsches Institut Fuer Normung (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- DIN84-M3X10
- T0720 - Fnss Savunma Sistemleri Anonim (Active)
- Related NATO Reproduction
- Related NATO Reproduction
- M3X10DIN84A2PAS S
- D9182 - Zf Industrieantriebe Witten Gmbh (Active)
- Advisory Reference
- Advisory Reference
- BN650 M3X10
- 1CJ86 - Bossard Intl Inc (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5305-01-353-6300
- Characteristic
- Specifications
- FIIG
- Specifications
- A500D0
- Thread Series Designator [THSD]
- M
- Nominal Thread Diameter [AHYM]
- 3.0 Millimeters
- Thread Pitch In Millimeters [CQQR]
- 0.5
- External Thread Tolerance Class [CQWR]
- 6G
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 9.0 Millimeters Nominal
- Fastener Length [AASB]
- 10.0 Millimeters Nominal
- Screw Material [CYAU]
- Steel Corrosion Resisting
- Head Style [AASK]
- Flat Chamfer
- Head Diameter [AASL]
- 5.5 Millimeters Nominal
- Head Height [AASU]
- 2.0 Millimeters Nominal
- Internal Drive Style [ABQZ]
- Slot
DLA Procurement Analysis 5305-01-353-6300
Management Data 5305-01-353-6300
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5305-01-353-6300
Freight Information 5305-01-353-6300
5305-01-353-6300 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-353-6300 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-353-6300 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5305-01-353-6300 is not classified as a special type of cargo when transported by water. 5305-01-353-6300 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-353-6300
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5305-01-353-6300 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: