Premium Information is available for this item - Upgrade for $1 a day
5305-01-352-2078
Close Tolerance Screw
5305013522078 013522078 PBF1419-8-21 VCL0008-8-21 HR242-8-21 03A161-8-21 AIC4410-8-21 123741-8-21 SLB217-8-21 X0007-8-21
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
May 2023
8
Marketplace 5305-01-352-2078
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-352-2078 3+ Documents (More...)
BUY NE FedMall Updated Every Day 5305-01-352-2078 RQST NE Updated Every Day 5305-01-352-2078 RQST
Updated Every Day 5305-01-352-2078 RQST NE Related Documents 5305-01-352-2078 3+ Documents ( More...
Close Tolerance Screw 5305013522078 013522078 Screw5305013522078 013522078 PBF1419-8-21 VCL0008
-8-21 HR242-8-21 03A161-8-21 AIC4410-8-21 123741-8-21 SLB217-8-21 X0007 (Active) Secondary Buy RNCC 5
Close Tolerance Screw 5305013522078 013522078 Screw5305013522078 013522078 PBF1419-8-21 VCL0008
-8-21 HR242-8-21 03A161-8-21 AIC4410-8-21 123741-8-21 SLB217-8-21 X0007 (Active) Secondary Buy RNCC 5
Restrictions 5305-01-352-2078
5305-01-352-2078 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-352-2078
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-352-2078
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5305-01-352-2078
- Part Number
- Manufacturer
- Status
- 03A161-8-21
- Manufacturer
- 76823 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
- PBF1419-8-21
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- VCL0008-8-21
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- HR242-8-21
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- 03A161-8-21
- 1W025 - Northrop Grumman Systems Corp (Active)
- Secondary Buy
- Secondary Buy
- HR242-8-21
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- AIC4410-8-21
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 123741-8-21
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- SLB217-8-21
- 16258 - Space-Lok, Inc. (Active)
- Secondary Buy
- Secondary Buy
- X0007-8-21
- 17446 - Huck International, Inc (Active)
- Secondary Buy
- Secondary Buy
- X0007-8-21
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-352-2078
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 2.032 Inches Minimum And 2.062 Inches Maximum
- Grip Diameter [AAUR]
- 0.4985 Inches Minimum And 0.4995 Inches Maximum
- Grip Length [ANEE]
- 1.302 Inches Minimum And 1.322 Inches Maximum
- Head Diameter [AASL]
- 0.959 Inches Minimum And 1.017 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Nickel Alloy 718 Overall
- Nominal Thread Diameter [AHYM]
- 0.500 Inches
- Internal Drive Style [ABQZ]
- Offset Cruciform (Torque Set)
- Material Document And Classification [MDCL]
- Ams5662 Assn Std Single Material Response Overall
- Thread Series Designator [THSD]
- Unjf
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.735 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 20
DLA Procurement Analysis 5305-01-352-2078
Management Data 5305-01-352-2078
Similar Supply Items to 5305-01-352-2078
Freight Information 5305-01-352-2078
5305-01-352-2078 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-352-2078 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-352-2078 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-352-2078 is not classified as a special type of cargo when transported by water. 5305-01-352-2078 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5305-01-352-2078 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: